Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /arch/cris/arch-v32/mach-a3/Kconfig 
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
if CONFIG_CRIS_MACH_ARTPEC3

menu "Artpec-3 options"
       depends on CONFIG_CRIS_MACH_ARTPEC3

config CONFIG_ETRAX_DRAM_VIRTUAL_BASE
	hex
	default "c0000000"

config CONFIG_ETRAX_L2CACHE
       bool
       default y

config CONFIG_ETRAX_SERIAL_PORTS
       int
       default 5

config CONFIG_ETRAX_DDR2_MRS
	hex "DDR2 MRS"
	default "0"

config CONFIG_ETRAX_DDR2_TIMING
	hex "DDR2 SDRAM timing"
	default "0"
	help
	  SDRAM timing parameters.

config CONFIG_ETRAX_DDR2_CONFIG
	hex "DDR2 config"
	default "0"

config CONFIG_ETRAX_DDR2_LATENCY
	hex "DDR2 latency"
	default "0"

config CONFIG_ETRAX_PIO_CE0_CFG
       hex "PIO CE0 configuration"
       default "0"

config CONFIG_ETRAX_PIO_CE1_CFG
       hex "PIO CE1 configuration"
       default "0"

config CONFIG_ETRAX_PIO_CE2_CFG
       hex "PIO CE2 configuration"
       default "0"

config CONFIG_ETRAX_DEF_GIO_PA_OE
	hex "GIO_PA_OE"
	default "00000000"
	help
	  Configures the direction of general port CONFIG_A bits.  1 is out, 0 is in.
	  This is often totally different depending on the product used.
	  There are some guidelines though - if you know that only LED's are
	  connected to port PA, then they are usually connected to bits 2-4
	  and you can therefore use 1c.  On other boards which don't have the
	  LED's at the general ports, these bits are used for all kinds of
	  stuff.  If you don't know what to use, it is always safe to put all
	  as inputs, although floating inputs isn't good.

config CONFIG_ETRAX_DEF_GIO_PA_OUT
	hex "GIO_PA_OUT"
	default "00000000"
	help
	  Configures the initial data for the general port CONFIG_A bits.  Most
	  products should use 00 here.

config CONFIG_ETRAX_DEF_GIO_PB_OE
	hex "GIO_PB_OE"
	default "000000000"
	help
	  Configures the direction of general port CONFIG_B bits.  1 is out, 0 is in.
	  This is often totally different depending on the product used.
	  There are some guidelines though - if you know that only LED's are
	  connected to port PA, then they are usually connected to bits 2-4
	  and you can therefore use 1c.  On other boards which don't have the
	  LED's at the general ports, these bits are used for all kinds of
	  stuff.  If you don't know what to use, it is always safe to put all
	  as inputs, although floating inputs isn't good.

config CONFIG_ETRAX_DEF_GIO_PB_OUT
	hex "GIO_PB_OUT"
	default "000000000"
	help
	  Configures the initial data for the general port CONFIG_B bits.  Most
	  products should use 00000 here.

config CONFIG_ETRAX_DEF_GIO_PC_OE
	hex "GIO_PC_OE"
	default "00000"
	help
	  Configures the direction of general port CONFIG_C bits.  1 is out, 0 is in.
	  This is often totally different depending on the product used.
	  There are some guidelines though - if you know that only LED's are
	  connected to port PA, then they are usually connected to bits 2-4
	  and you can therefore use 1c.  On other boards which don't have the
	  LED's at the general ports, these bits are used for all kinds of
	  stuff.  If you don't know what to use, it is always safe to put all
	  as inputs, although floating inputs isn't good.

config CONFIG_ETRAX_DEF_GIO_PC_OUT
	hex "GIO_PC_OUT"
	default "00000"
	help
	  Configures the initial data for the general port CONFIG_C bits.  Most
	  products should use 00000 here.

endmenu

endif