Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

/******************************************************************************
 *
 * Module Name: utbuffer - Buffer dump routines
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2016, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include "accommon.h"

#define _COMPONENT          ACPI_UTILITIES
ACPI_MODULE_NAME("utbuffer")

/*******************************************************************************
 *
 * FUNCTION:    acpi_ut_dump_buffer
 *
 * PARAMETERS:  buffer              - Buffer to dump
 *              count               - Amount to dump, in bytes
 *              display             - BYTE, WORD, DWORD, or QWORD display:
 *                                      DB_BYTE_DISPLAY
 *                                      DB_WORD_DISPLAY
 *                                      DB_DWORD_DISPLAY
 *                                      DB_QWORD_DISPLAY
 *              base_offset         - Beginning buffer offset (display only)
 *
 * RETURN:      None
 *
 * DESCRIPTION: Generic dump buffer in both hex and ascii.
 *
 ******************************************************************************/
void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset)
{
	u32 i = 0;
	u32 j;
	u32 temp32;
	u8 buf_char;

	if (!buffer) {
		acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n");
		return;
	}

	if ((count < 4) || (count & 0x01)) {
		display = DB_BYTE_DISPLAY;
	}

	/* Nasty little dump buffer routine! */

	while (i < count) {

		/* Print current offset */

		acpi_os_printf("%6.4X: ", (base_offset + i));

		/* Print 16 hex chars */

		for (j = 0; j < 16;) {
			if (i + j >= count) {

				/* Dump fill spaces */

				acpi_os_printf("%*s", ((display * 2) + 1), " ");
				j += display;
				continue;
			}

			switch (display) {
			case DB_BYTE_DISPLAY:
			default:	/* Default is BYTE display */

				acpi_os_printf("%02X ",
					       buffer[(acpi_size)i + j]);
				break;

			case DB_WORD_DISPLAY:

				ACPI_MOVE_16_TO_32(&temp32,
						   &buffer[(acpi_size)i + j]);
				acpi_os_printf("%04X ", temp32);
				break;

			case DB_DWORD_DISPLAY:

				ACPI_MOVE_32_TO_32(&temp32,
						   &buffer[(acpi_size)i + j]);
				acpi_os_printf("%08X ", temp32);
				break;

			case DB_QWORD_DISPLAY:

				ACPI_MOVE_32_TO_32(&temp32,
						   &buffer[(acpi_size)i + j]);
				acpi_os_printf("%08X", temp32);

				ACPI_MOVE_32_TO_32(&temp32,
						   &buffer[(acpi_size)i + j +
							   4]);
				acpi_os_printf("%08X ", temp32);
				break;
			}

			j += display;
		}

		/*
		 * Print the ASCII equivalent characters but watch out for the bad
		 * unprintable ones (printable chars are 0x20 through 0x7E)
		 */
		acpi_os_printf(" ");
		for (j = 0; j < 16; j++) {
			if (i + j >= count) {
				acpi_os_printf("\n");
				return;
			}

			/*
			 * Add comment characters so rest of line is ignored when
			 * compiled
			 */
			if (j == 0) {
				acpi_os_printf("// ");
			}

			buf_char = buffer[(acpi_size)i + j];
			if (isprint(buf_char)) {
				acpi_os_printf("%c", buf_char);
			} else {
				acpi_os_printf(".");
			}
		}

		/* Done with that line. */

		acpi_os_printf("\n");
		i += 16;
	}

	return;
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ut_debug_dump_buffer
 *
 * PARAMETERS:  buffer              - Buffer to dump
 *              count               - Amount to dump, in bytes
 *              display             - BYTE, WORD, DWORD, or QWORD display:
 *                                      DB_BYTE_DISPLAY
 *                                      DB_WORD_DISPLAY
 *                                      DB_DWORD_DISPLAY
 *                                      DB_QWORD_DISPLAY
 *              component_ID        - Caller's component ID
 *
 * RETURN:      None
 *
 * DESCRIPTION: Generic dump buffer in both hex and ascii.
 *
 ******************************************************************************/

void
acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id)
{

	/* Only dump the buffer if tracing is enabled */

	if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
	      (component_id & acpi_dbg_layer))) {
		return;
	}

	acpi_ut_dump_buffer(buffer, count, display, 0);
}

#ifdef ACPI_APPLICATION
/*******************************************************************************
 *
 * FUNCTION:    acpi_ut_dump_buffer_to_file
 *
 * PARAMETERS:  file                - File descriptor
 *              buffer              - Buffer to dump
 *              count               - Amount to dump, in bytes
 *              display             - BYTE, WORD, DWORD, or QWORD display:
 *                                      DB_BYTE_DISPLAY
 *                                      DB_WORD_DISPLAY
 *                                      DB_DWORD_DISPLAY
 *                                      DB_QWORD_DISPLAY
 *              base_offset         - Beginning buffer offset (display only)
 *
 * RETURN:      None
 *
 * DESCRIPTION: Generic dump buffer in both hex and ascii to a file.
 *
 ******************************************************************************/

void
acpi_ut_dump_buffer_to_file(ACPI_FILE file,
			    u8 *buffer, u32 count, u32 display, u32 base_offset)
{
	u32 i = 0;
	u32 j;
	u32 temp32;
	u8 buf_char;

	if (!buffer) {
		fprintf(file, "Null Buffer Pointer in DumpBuffer!\n");
		return;
	}

	if ((count < 4) || (count & 0x01)) {
		display = DB_BYTE_DISPLAY;
	}

	/* Nasty little dump buffer routine! */

	while (i < count) {

		/* Print current offset */

		fprintf(file, "%6.4X: ", (base_offset + i));

		/* Print 16 hex chars */

		for (j = 0; j < 16;) {
			if (i + j >= count) {

				/* Dump fill spaces */

				fprintf(file, "%*s", ((display * 2) + 1), " ");
				j += display;
				continue;
			}

			switch (display) {
			case DB_BYTE_DISPLAY:
			default:	/* Default is BYTE display */

				fprintf(file, "%02X ",
					buffer[(acpi_size)i + j]);
				break;

			case DB_WORD_DISPLAY:

				ACPI_MOVE_16_TO_32(&temp32,
						   &buffer[(acpi_size)i + j]);
				fprintf(file, "%04X ", temp32);
				break;

			case DB_DWORD_DISPLAY:

				ACPI_MOVE_32_TO_32(&temp32,
						   &buffer[(acpi_size)i + j]);
				fprintf(file, "%08X ", temp32);
				break;

			case DB_QWORD_DISPLAY:

				ACPI_MOVE_32_TO_32(&temp32,
						   &buffer[(acpi_size)i + j]);
				fprintf(file, "%08X", temp32);

				ACPI_MOVE_32_TO_32(&temp32,
						   &buffer[(acpi_size)i + j +
							   4]);
				fprintf(file, "%08X ", temp32);
				break;
			}

			j += display;
		}

		/*
		 * Print the ASCII equivalent characters but watch out for the bad
		 * unprintable ones (printable chars are 0x20 through 0x7E)
		 */
		fprintf(file, " ");
		for (j = 0; j < 16; j++) {
			if (i + j >= count) {
				fprintf(file, "\n");
				return;
			}

			buf_char = buffer[(acpi_size)i + j];
			if (isprint(buf_char)) {
				fprintf(file, "%c", buf_char);
			} else {
				fprintf(file, ".");
			}
		}

		/* Done with that line. */

		fprintf(file, "\n");
		i += 16;
	}

	return;
}
#endif