Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /drivers/phy/phy-qcom-ufs-qmp-14nm.h 
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
/*
 * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#ifndef UFS_QCOM_PHY_QMP_14NM_H_
#define UFS_QCOM_PHY_QMP_14NM_H_

#include "phy-qcom-ufs-i.h"

/* QCOM UFS PHY control registers */
#define COM_OFF(x)	(0x000 + x)
#define PHY_OFF(x)	(0xC00 + x)
#define TX_OFF(n, x)	(0x400 + (0x400 * n) + x)
#define RX_OFF(n, x)	(0x600 + (0x400 * n) + x)

/* UFS PHY QSERDES COM registers */
#define QSERDES_COM_BG_TIMER			COM_OFF(0x0C)
#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		COM_OFF(0x34)
#define QSERDES_COM_SYS_CLK_CTRL		COM_OFF(0x3C)
#define QSERDES_COM_LOCK_CMP1_MODE0		COM_OFF(0x4C)
#define QSERDES_COM_LOCK_CMP2_MODE0		COM_OFF(0x50)
#define QSERDES_COM_LOCK_CMP3_MODE0		COM_OFF(0x54)
#define QSERDES_COM_LOCK_CMP1_MODE1		COM_OFF(0x58)
#define QSERDES_COM_LOCK_CMP2_MODE1		COM_OFF(0x5C)
#define QSERDES_COM_LOCK_CMP3_MODE1		COM_OFF(0x60)
#define QSERDES_COM_CP_CTRL_MODE0		COM_OFF(0x78)
#define QSERDES_COM_CP_CTRL_MODE1		COM_OFF(0x7C)
#define QSERDES_COM_PLL_RCTRL_MODE0		COM_OFF(0x84)
#define QSERDES_COM_PLL_RCTRL_MODE1		COM_OFF(0x88)
#define QSERDES_COM_PLL_CCTRL_MODE0		COM_OFF(0x90)
#define QSERDES_COM_PLL_CCTRL_MODE1		COM_OFF(0x94)
#define QSERDES_COM_SYSCLK_EN_SEL		COM_OFF(0xAC)
#define QSERDES_COM_RESETSM_CNTRL		COM_OFF(0xB4)
#define QSERDES_COM_LOCK_CMP_EN			COM_OFF(0xC8)
#define QSERDES_COM_LOCK_CMP_CFG		COM_OFF(0xCC)
#define QSERDES_COM_DEC_START_MODE0		COM_OFF(0xD0)
#define QSERDES_COM_DEC_START_MODE1		COM_OFF(0xD4)
#define QSERDES_COM_DIV_FRAC_START1_MODE0	COM_OFF(0xDC)
#define QSERDES_COM_DIV_FRAC_START2_MODE0	COM_OFF(0xE0)
#define QSERDES_COM_DIV_FRAC_START3_MODE0	COM_OFF(0xE4)
#define QSERDES_COM_DIV_FRAC_START1_MODE1	COM_OFF(0xE8)
#define QSERDES_COM_DIV_FRAC_START2_MODE1	COM_OFF(0xEC)
#define QSERDES_COM_DIV_FRAC_START3_MODE1	COM_OFF(0xF0)
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0	COM_OFF(0x108)
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0	COM_OFF(0x10C)
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1	COM_OFF(0x110)
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1	COM_OFF(0x114)
#define QSERDES_COM_VCO_TUNE_CTRL		COM_OFF(0x124)
#define QSERDES_COM_VCO_TUNE_MAP		COM_OFF(0x128)
#define QSERDES_COM_VCO_TUNE1_MODE0		COM_OFF(0x12C)
#define QSERDES_COM_VCO_TUNE2_MODE0		COM_OFF(0x130)
#define QSERDES_COM_VCO_TUNE1_MODE1		COM_OFF(0x134)
#define QSERDES_COM_VCO_TUNE2_MODE1		COM_OFF(0x138)
#define QSERDES_COM_VCO_TUNE_TIMER1		COM_OFF(0x144)
#define QSERDES_COM_VCO_TUNE_TIMER2		COM_OFF(0x148)
#define QSERDES_COM_CLK_SELECT			COM_OFF(0x174)
#define QSERDES_COM_HSCLK_SEL			COM_OFF(0x178)
#define QSERDES_COM_CORECLK_DIV			COM_OFF(0x184)
#define QSERDES_COM_CORE_CLK_EN			COM_OFF(0x18C)
#define QSERDES_COM_CMN_CONFIG			COM_OFF(0x194)
#define QSERDES_COM_SVS_MODE_CLK_SEL		COM_OFF(0x19C)
#define QSERDES_COM_CORECLK_DIV_MODE1		COM_OFF(0x1BC)

/* UFS PHY registers */
#define UFS_PHY_PHY_START			PHY_OFF(0x00)
#define UFS_PHY_POWER_DOWN_CONTROL		PHY_OFF(0x04)
#define UFS_PHY_PCS_READY_STATUS		PHY_OFF(0x168)

/* UFS PHY TX registers */
#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN	TX_OFF(0, 0x68)
#define QSERDES_TX_LANE_MODE				TX_OFF(0, 0x94)

/* UFS PHY RX registers */
#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN	RX_OFF(0, 0x40)
#define QSERDES_RX_RX_TERM_BW			RX_OFF(0, 0x90)
#define QSERDES_RX_RX_EQ_GAIN1_LSB		RX_OFF(0, 0xC4)
#define QSERDES_RX_RX_EQ_GAIN1_MSB		RX_OFF(0, 0xC8)
#define QSERDES_RX_RX_EQ_GAIN2_LSB		RX_OFF(0, 0xCC)
#define QSERDES_RX_RX_EQ_GAIN2_MSB		RX_OFF(0, 0xD0)
#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2	RX_OFF(0, 0xD8)
#define QSERDES_RX_SIGDET_CNTRL			RX_OFF(0, 0x114)
#define QSERDES_RX_SIGDET_LVL			RX_OFF(0, 0x118)
#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL	RX_OFF(0, 0x11C)
#define QSERDES_RX_RX_INTERFACE_MODE		RX_OFF(0, 0x12C)

/*
 * This structure represents the 14nm specific phy.
 * common_cfg MUST remain the first field in this structure
 * in case extra fields are added. This way, when calling
 * get_ufs_qcom_phy() of generic phy, we can extract the
 * common phy structure (struct ufs_qcom_phy) out of it
 * regardless of the relevant specific phy.
 */
struct ufs_qcom_phy_qmp_14nm {
	struct ufs_qcom_phy common_cfg;
};

static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),

	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),

	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
};

static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
};

#endif