#
# Video configuration
#
menu "Console display driver support"
config [31mCONFIG_VGA_CONSOLE[0m
bool "VGA text console" if [31mCONFIG_EXPERT[0m || ![31mCONFIG_X86[0m
depends on ![31mCONFIG_4xx[0m && ![31mCONFIG_8xx[0m && ![31mCONFIG_SPARC[0m && ![31mCONFIG_M68K[0m && ![31mCONFIG_PARISC[0m && ![31mCONFIG_FRV[0m && \
![31mCONFIG_SUPERH[0m && ![31mCONFIG_BLACKFIN[0m && ![31mCONFIG_AVR32[0m && ![31mCONFIG_MN10300[0m && ![31mCONFIG_CRIS[0m && \
(![31mCONFIG_ARM[0m || [31mCONFIG_ARCH_FOOTBRIDGE[0m || [31mCONFIG_ARCH_INTEGRATOR[0m || [31mCONFIG_ARCH_NETWINDER[0m) && \
![31mCONFIG_ARM64[0m && ![31mCONFIG_ARC[0m && ![31mCONFIG_MICROBLAZE[0m && ![31mCONFIG_OPENRISC[0m
default y
help
Saying Y here will allow you to use Linux in text mode through a
display that complies with the generic VGA standard. Virtually
everyone wants that.
The program SVGATextMode can be used to utilize SVGA video cards to
their full potential in text mode. Download it from
<ftp://ibiblio.org/pub/Linux/utils/console/>.
Say Y.
config [31mCONFIG_VGACON_SOFT_SCROLLBACK[0m
bool "Enable Scrollback Buffer in System RAM"
depends on [31mCONFIG_VGA_CONSOLE[0m
default n
help
The scrollback buffer of the standard VGA console is located in
the VGA RAM. The size of this RAM is fixed and is quite small.
If you require a larger scrollback buffer, this can be placed in
System RAM which is dynamically allocated during initialization.
Placing the scrollback buffer in System RAM will slightly slow
down the console.
If you want this feature, say 'Y' here and enter the amount of
RAM to allocate for this buffer. If unsure, say 'N'.
config [31mCONFIG_VGACON_SOFT_SCROLLBACK_SIZE[0m
int "Scrollback Buffer Size (in KB)"
depends on [31mCONFIG_VGACON_SOFT_SCROLLBACK[0m
range 1 1024
default "64"
help
Enter the amount of System RAM to allocate for the scrollback
buffer. Each 64KB will give you approximately 16 80x25
screenfuls of scrollback buffer
config [31mCONFIG_MDA_CONSOLE[0m
depends on ![31mCONFIG_M68K[0m && ![31mCONFIG_PARISC[0m && [31mCONFIG_ISA[0m
tristate "MDA text console (dual-headed)"
---help---
Say Y here if you have an old MDA or monochrome Hercules graphics
adapter in your system acting as a second head ( = video card). You
will then be able to use two monitors with your Linux system. Do not
say Y here if your MDA card is the primary card in your system; the
normal VGA driver will handle it.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called mdacon.
If unsure, say N.
config [31mCONFIG_SGI_NEWPORT_CONSOLE[0m
tristate "SGI Newport Console support"
depends on [31mCONFIG_SGI_IP22[0m
select [31mCONFIG_FONT_SUPPORT[0m
help
Say Y here if you want the console on the Newport aka XL graphics
card of your Indy. Most people say Y here.
config [31mCONFIG_DUMMY_CONSOLE[0m
bool
depends on [31mCONFIG_VGA_CONSOLE[0m!=y || [31mCONFIG_SGI_NEWPORT_CONSOLE[0m!=y
default y
config [31mCONFIG_DUMMY_CONSOLE_COLUMNS[0m
int "Initial number of console screen columns"
depends on [31mCONFIG_DUMMY_CONSOLE[0m && ![31mCONFIG_ARM[0m
default 160 if [31mCONFIG_PARISC[0m
default 80
help
On PA-RISC, the default value is 160, which should fit a 1280x1024
monitor.
Select 80 if you use a 640x480 resolution by default.
config [31mCONFIG_DUMMY_CONSOLE_ROWS[0m
int "Initial number of console screen rows"
depends on [31mCONFIG_DUMMY_CONSOLE[0m && ![31mCONFIG_ARM[0m
default 64 if [31mCONFIG_PARISC[0m
default 25
help
On PA-RISC, the default value is 64, which should fit a 1280x1024
monitor.
Select 25 if you use a 640x480 resolution by default.
config [31mCONFIG_FRAMEBUFFER_CONSOLE[0m
tristate "Framebuffer Console support"
depends on [31mCONFIG_FB[0m && ![31mCONFIG_UML[0m
select [31mCONFIG_VT_HW_CONSOLE_BINDING[0m
select [31mCONFIG_CRC32[0m
select [31mCONFIG_FONT_SUPPORT[0m
help
Low-level framebuffer-based console driver.
config [31mCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY[0m
bool "Map the console to the primary display device"
depends on [31mCONFIG_FRAMEBUFFER_CONSOLE[0m
default n
---help---
If this option is selected, the framebuffer console will
automatically select the primary display device (if the architecture
supports this feature). Otherwise, the framebuffer console will
always select the first framebuffer driver that is loaded. The latter
is the default behavior.
You can always override the automatic selection of the primary device
by using the fbcon=map: boot option.
If unsure, select n.
config [31mCONFIG_FRAMEBUFFER_CONSOLE_ROTATION[0m
bool "Framebuffer Console Rotation"
depends on [31mCONFIG_FRAMEBUFFER_CONSOLE[0m
help
Enable display rotation for the framebuffer console. This is done
in software and may be significantly slower than a normally oriented
display. Note that the rotation is done at the console level only
such that other users of the framebuffer will remain normally
oriented.
config [31mCONFIG_STI_CONSOLE[0m
bool "STI text console"
depends on [31mCONFIG_PARISC[0m
select [31mCONFIG_FONT_SUPPORT[0m
default y
help
The STI console is the builtin display/keyboard on HP-[31mCONFIG_PARISC[0m
machines. Say Y here to build support for it into your kernel.
The alternative is to use your primary serial port as a console.
endmenu