* Clock bindings for Freescale i.MX23
Required properties:
- compatible: Should be "fsl,imx23-clkctrl"
- reg: Address and length of the register set
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX23
clocks and IDs.
Clock ID
------------------
ref_xtal 0
pll 1
ref_cpu 2
ref_emi 3
ref_pix 4
ref_io 5
saif_sel 6
lcdif_sel 7
gpmi_sel 8
ssp_sel 9
emi_sel 10
cpu 11
etm_sel 12
cpu_pll 13
cpu_xtal 14
hbus 15
xbus 16
lcdif_div 17
ssp_div 18
gpmi_div 19
emi_pll 20
emi_xtal 21
etm_div 22
saif_div 23
clk32k_div 24
rtc 25
adc 26
spdif_div 27
clk32k 28
dri 29
pwm 30
filt 31
uart 32
ssp 33
gpmi 34
spdif 35
emi 36
saif 37
lcdif 38
etm 39
usb 40
usb_phy 41
Examples:
clks: clkctrl@80040000 {
compatible = "fsl,imx23-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
auart0: serial@8006c000 {
compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
clocks = <&clks 32>;
status = "disabled";
};