Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC

Required properties:
- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
- clock-names: Should contain the following:
	"cpu"		- The multiplexer for clock input of CPU cluster.
	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
			  source (usually MAINPLL) when the original CPU PLL is under
			  transition and not stable yet.
	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
	generic clock consumer properties.
- proc-supply: Regulator for Vproc of CPU cluster.

Optional properties:
- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
	       needs to do "voltage tracking" to step by step scale up/down Vproc and
	       Vsram to fit SoC specific needs. When absent, the voltage scaling
	       flow is handled by hardware, hence no software "voltage tracking" is
	       needed.

Example:
--------
	cpu0: cpu@0 {
		device_type = "cpu";
		compatible = "arm,cortex-a53";
		reg = <0x000>;
		enable-method = "psci";
		cpu-idle-states = <&CPU_SLEEP_0>;
		clocks = <&infracfg CLK_INFRA_CA53SEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
	};

	cpu1: cpu@1 {
		device_type = "cpu";
		compatible = "arm,cortex-a53";
		reg = <0x001>;
		enable-method = "psci";
		cpu-idle-states = <&CPU_SLEEP_0>;
		clocks = <&infracfg CLK_INFRA_CA53SEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
	};

	cpu2: cpu@100 {
		device_type = "cpu";
		compatible = "arm,cortex-a57";
		reg = <0x100>;
		enable-method = "psci";
		cpu-idle-states = <&CPU_SLEEP_0>;
		clocks = <&infracfg CLK_INFRA_CA57SEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
	};

	cpu3: cpu@101 {
		device_type = "cpu";
		compatible = "arm,cortex-a57";
		reg = <0x101>;
		enable-method = "psci";
		cpu-idle-states = <&CPU_SLEEP_0>;
		clocks = <&infracfg CLK_INFRA_CA57SEL>,
			 <&apmixedsys CLK_APMIXED_MAINPLL>;
		clock-names = "cpu", "intermediate";
	};

	&cpu0 {
		proc-supply = <&mt6397_vpca15_reg>;
	};

	&cpu1 {
		proc-supply = <&mt6397_vpca15_reg>;
	};

	&cpu2 {
		proc-supply = <&da9211_vcpu_reg>;
		sram-supply = <&mt6397_vsramca7_reg>;
	};

	&cpu3 {
		proc-supply = <&da9211_vcpu_reg>;
		sram-supply = <&mt6397_vsramca7_reg>;
	};