Imagination Technologies Pistachio SoC clock controllers
========================================================

Pistachio has four clock controllers (core clock, peripheral clock, peripheral
general control, and top general control) which are instantiated individually
from the device-tree.

External clocks:
----------------

There are three external inputs to the clock controllers which should be
defined with the following clock-output-names:
- "xtal": External 52Mhz oscillator (required)
- "audio_clk_in": Alternate audio reference clock (optional)
- "enet_clk_in": Alternate ethernet PHY clock (optional)

Core clock controller:
----------------------

The core clock controller generates clocks for the CPU, RPU (WiFi + BT
co-processor), audio, and several peripherals.

Required properties:
- compatible: Must be "img,pistachio-clk".
- reg: Must contain the base address and length of the core clock controller.
- #clock-cells: Must be 1.  The single cell is the clock identifier.
  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
- clocks: Must contain an entry for each clock in clock-names.
- clock-names: Must include "xtal" (see "External clocks") and
  "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the
  top-level general control.

Example:
	clk_core: clock-controller@18144000 {
		compatible = "img,pistachio-clk";
		reg = <0x18144000 0x800>;
		clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
			 <&cr_top EXT_CLK_ENET_IN>;
		clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate";

		#clock-cells = <1>;
	};

Peripheral clock controller:
----------------------------

The peripheral clock controller generates clocks for the DDR, ROM, and other
peripherals.  The peripheral system clock ("periph_sys") generated by the core
clock controller is the input clock to the peripheral clock controller.

Required properties:
- compatible: Must be "img,pistachio-periph-clk".
- reg: Must contain the base address and length of the peripheral clock
  controller.
- #clock-cells: Must be 1.  The single cell is the clock identifier.
  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
- clocks: Must contain an entry for each clock in clock-names.
- clock-names: Must include "periph_sys", the peripheral system clock generated
  by the core clock controller.

Example:
	clk_periph: clock-controller@18144800 {
		compatible = "img,pistachio-clk-periph";
		reg = <0x18144800 0x800>;
		clocks = <&clk_core CLK_PERIPH_SYS>;
		clock-names = "periph_sys";

		#clock-cells = <1>;
	};

Peripheral general control:
---------------------------

The peripheral general control block generates system interface clocks and
resets for various peripherals.  It also contains miscellaneous peripheral
control registers.  The system clock ("sys") generated by the peripheral clock
controller is the input clock to the system clock controller.

Required properties:
- compatible: Must include "img,pistachio-periph-cr" and "syscon".
- reg: Must contain the base address and length of the peripheral general
  control registers.
- #clock-cells: Must be 1.  The single cell is the clock identifier.
  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
- clocks: Must contain an entry for each clock in clock-names.
- clock-names: Must include "sys", the system clock generated by the peripheral
  clock controller.

Example:
	cr_periph: syscon@18144800 {
		compatible = "img,pistachio-cr-periph", "syscon";
		reg = <0x18148000 0x1000>;
		clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>;
		clock-names = "sys";

		#clock-cells = <1>;
	};

Top-level general control:
--------------------------

The top-level general control block contains miscellaneous control registers and
gates for the external clocks "audio_clk_in" and "enet_clk_in".

Required properties:
- compatible: Must include "img,pistachio-cr-top" and "syscon".
- reg: Must contain the base address and length of the top-level
  control registers.
- clocks: Must contain an entry for each clock in clock-names.
- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see
  "External clocks").
- #clock-cells: Must be 1.  The single cell is the clock identifier.
  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.

Example:
	cr_top: syscon@18144800 {
		compatible = "img,pistachio-cr-top", "syscon";
		reg = <0x18149000 0x200>;
		clocks = <&audio_refclk>, <&ext_enet_in>;
		clock-names = "audio_clk_in", "enet_clk_in";

		#clock-cells = <1>;
	};