* TI Common Platform Interrupt Controller

Common Platform Interrupt Controller (cp_intc) is used on
OMAP-L1x SoCs and can support several configurable number
of interrupts.

Main node required properties:

- compatible : should be:
	"ti,cp-intc"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
  interrupt source. The type shall be a <u32> and the value shall be 1.

  The cell contains the interrupt number in the range [0-128].
- ti,intc-size: Number of interrupts handled by the interrupt controller.
- reg: physical base address and size of the intc registers map.

Example:

	intc: interrupt-controller@1 {
		compatible = "ti,cp-intc";
		interrupt-controller;
		#interrupt-cells = <1>;
		ti,intc-size = <101>;
		reg = <0xfffee000 0x2000>;
	};