Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /arch/arm/boot/dts/at91sam9g25ek.dts 
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
/*
 * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
 *
 *  Copyright (C) 2012 Atmel,
 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
 *
 * Licensed under GPLv2 or later.
 */
/dts-v1/;
#include "at91sam9g25.dtsi"
#include "at91sam9x5ek.dtsi"

/ {
	model = "Atmel AT91SAM9G25-EK";
	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";

	ahb {
		apb {
			spi0: spi@f0000000 {
				status = "disabled";
			};

			mmc1: mmc@f000c000 {
				status = "disabled";
			};

			i2c0: i2c@f8010000 {
				ov2640: camera@0x30 {
					compatible = "ovti,ov2640";
					reg = <0x30>;
					pinctrl-names = "default";
					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
					clocks = <&pck0>;
					clock-names = "xvclk";
					assigned-clocks = <&pck0>;
					assigned-clock-rates = <25000000>;
					status = "okay";

					port {
						ov2640_0: endpoint {
							remote-endpoint = <&isi_0>;
							bus-width = <8>;
						};
					};
				};
			};

			macb0: ethernet@f802c000 {
				phy-mode = "rmii";
				status = "okay";
			};

			isi: isi@f8048000 {
				status = "okay";
				port {
					isi_0: endpoint@0 {
						reg = <0>;
						remote-endpoint = <&ov2640_0>;
						bus-width = <8>;
						vsync-active = <1>;
						hsync-active = <1>;
					};
				};
			};
		};
	};
};