/*
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* BSD LICENSE
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/* QSFP support common definitions, for hfi driver */
#define QSFP_DEV 0xA0
#define QSFP_PWR_LAG_MSEC 2000
#define QSFP_MODPRS_LAG_MSEC 20
/* 128 byte pages, per SFF 8636 rev 2.4 */
#define QSFP_MAX_NUM_PAGES 5
/*
* Below are masks for QSFP pins. Pins are the same for HFI0 and HFI1.
* _N means asserted low
*/
#define QSFP_HFI0_I2CCLK BIT(0)
#define QSFP_HFI0_I2CDAT BIT(1)
#define QSFP_HFI0_RESET_N BIT(2)
#define QSFP_HFI0_INT_N BIT(3)
#define QSFP_HFI0_MODPRST_N BIT(4)
/* QSFP is paged at 256 bytes */
#define QSFP_PAGESIZE 256
/* Reads/writes cannot cross 128 byte boundaries */
#define QSFP_RW_BOUNDARY 128
/* number of bytes in i2c offset for QSFP devices */
#define __QSFP_OFFSET_SIZE 1 /* num address bytes */
#define QSFP_OFFSET_SIZE (__QSFP_OFFSET_SIZE << 8) /* shifted value */
/* Defined fields that Intel requires of qualified cables */
/* Byte 0 is Identifier, not checked */
/* Byte 1 is reserved "status MSB" */
#define QSFP_MONITOR_VAL_START 22
#define QSFP_MONITOR_VAL_END 81
#define QSFP_MONITOR_RANGE (QSFP_MONITOR_VAL_END - QSFP_MONITOR_VAL_START + 1)
#define QSFP_TX_CTRL_BYTE_OFFS 86
#define QSFP_PWR_CTRL_BYTE_OFFS 93
#define QSFP_CDR_CTRL_BYTE_OFFS 98
#define QSFP_PAGE_SELECT_BYTE_OFFS 127
/* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */
#define QSFP_MOD_ID_OFFS 128
/*
* Byte 129 is "Extended Identifier".
* For bits [7:6]: 0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W
* For bits [1:0]: 0:Unused, 1:4W, 2:4.5W, 3:5W
*/
#define QSFP_MOD_PWR_OFFS 129
/* Byte 130 is Connector type. Not Intel req'd */
/* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */
/* Byte 139 is encoding. code 0x01 is 8b10b. Not Intel req'd */
/* byte 140 is nominal bit-rate, in units of 100Mbits/sec */
#define QSFP_NOM_BIT_RATE_100_OFFS 140
/* Byte 141 is Extended Rate Select. Not Intel req'd */
/* Bytes 142..145 are lengths for various fiber types. Not Intel req'd */
/* Byte 146 is length for Copper. Units of 1 meter */
#define QSFP_MOD_LEN_OFFS 146
/*
* Byte 147 is Device technology. D0..3 not Intel req'd
* D4..7 select from 15 choices, translated by table:
*/
#define QSFP_MOD_TECH_OFFS 147
extern const char *const hfi1_qsfp_devtech[16];
/* Active Equalization includes fiber, copper full EQ, and copper near Eq */
#define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1)
/* Active Equalization includes fiber, copper full EQ, and copper far Eq */
#define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1)
/* Attenuation should be valid for copper other than full/near Eq */
#define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1)
/* Length is only valid if technology is "copper" */
#define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1)
#define QSFP_TECH_1490 9
#define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \
oui[2])
#define QSFP_OUI_AMPHENOL 0x415048
#define QSFP_OUI_FINISAR 0x009065
#define QSFP_OUI_GORE 0x002177
/* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */
#define QSFP_VEND_OFFS 148
#define QSFP_VEND_LEN 16
/* Byte 164 is IB Extended transceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */
#define QSFP_IBXCV_OFFS 164
/* Bytes 165..167 are Vendor OUI number */
#define QSFP_VOUI_OFFS 165
#define QSFP_VOUI_LEN 3
/* Bytes 168..183 are Vendor Part Number, string */
#define QSFP_PN_OFFS 168
#define QSFP_PN_LEN 16
/* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */
#define QSFP_REV_OFFS 184
#define QSFP_REV_LEN 2
/*
* Bytes 186,187 are Wavelength, if Optical. Not Intel req'd
* If copper, they are attenuation in dB:
* Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR)
*/
#define QSFP_ATTEN_OFFS 186
#define QSFP_ATTEN_LEN 2
/*
* Bytes 188,189 are Wavelength tolerance, if optical
* If copper, they are attenuation in dB:
* Byte 188 is at 12.5 Gb/s, Byte 189 at 25 Gb/s
*/
#define QSFP_CU_ATTEN_7G_OFFS 188
#define QSFP_CU_ATTEN_12G_OFFS 189
/* Byte 190 is Max Case Temp. Not Intel req'd */
/* Byte 191 is LSB of sum of bytes 128..190. Not Intel req'd */
#define QSFP_CC_OFFS 191
#define QSFP_EQ_INFO_OFFS 193
#define QSFP_CDR_INFO_OFFS 194
/* Bytes 196..211 are Serial Number, String */
#define QSFP_SN_OFFS 196
#define QSFP_SN_LEN 16
/* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */
#define QSFP_DATE_OFFS 212
#define QSFP_DATE_LEN 6
/* Bytes 218,219 are optional lot-code, string */
#define QSFP_LOT_OFFS 218
#define QSFP_LOT_LEN 2
/* Bytes 220, 221 indicate monitoring options, Not Intel req'd */
/* Byte 222 indicates nominal bitrate in units of 250Mbits/sec */
#define QSFP_NOM_BIT_RATE_250_OFFS 222
/* Byte 223 is LSB of sum of bytes 192..222 */
#define QSFP_CC_EXT_OFFS 223
/*
* Interrupt flag masks
*/
#define QSFP_DATA_NOT_READY 0x01
#define QSFP_HIGH_TEMP_ALARM 0x80
#define QSFP_LOW_TEMP_ALARM 0x40
#define QSFP_HIGH_TEMP_WARNING 0x20
#define QSFP_LOW_TEMP_WARNING 0x10
#define QSFP_HIGH_VCC_ALARM 0x80
#define QSFP_LOW_VCC_ALARM 0x40
#define QSFP_HIGH_VCC_WARNING 0x20
#define QSFP_LOW_VCC_WARNING 0x10
#define QSFP_HIGH_POWER_ALARM 0x88
#define QSFP_LOW_POWER_ALARM 0x44
#define QSFP_HIGH_POWER_WARNING 0x22
#define QSFP_LOW_POWER_WARNING 0x11
#define QSFP_HIGH_BIAS_ALARM 0x88
#define QSFP_LOW_BIAS_ALARM 0x44
#define QSFP_HIGH_BIAS_WARNING 0x22
#define QSFP_LOW_BIAS_WARNING 0x11
#define QSFP_ATTEN_SDR(attenarray) (attenarray[0])
#define QSFP_ATTEN_DDR(attenarray) (attenarray[1])
/*
* struct qsfp_data encapsulates state of QSFP device for one port.
* it will be part of port-specific data if a board supports QSFP.
*
* Since multiple board-types use QSFP, and their pport_data structs
* differ (in the chip-specific section), we need a pointer to its head.
*
* Avoiding premature optimization, we will have one work_struct per port,
* and let the qsfp_lock arbitrate access to common resources.
*
*/
struct qsfp_data {
/* Helps to find our way */
struct hfi1_pportdata *ppd;
struct work_struct qsfp_work;
u8 cache[QSFP_MAX_NUM_PAGES * 128];
/* protect qsfp data */
spinlock_t qsfp_lock;
u8 check_interrupt_flags;
u8 reset_needed;
u8 limiting_active;
u8 cache_valid;
u8 cache_refresh_required;
};
int refresh_qsfp_cache(struct hfi1_pportdata *ppd,
struct qsfp_data *cp);
int get_qsfp_power_class(u8 power_byte);
int qsfp_mod_present(struct hfi1_pportdata *ppd);
int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr,
u32 len, u8 *data);
int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
int offset, void *bp, int len);
int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
int offset, void *bp, int len);
int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int len);
int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int len);
int one_qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int len);
int one_qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int len);
struct hfi1_asic_data;
int set_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad);
void clean_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad);