#
# [31mCONFIG_USB[0m Serial device configuration
#
menuconfig [31mCONFIG_USB_SERIAL[0m
tristate "USB Serial Converter support"
depends on [31mCONFIG_TTY[0m
---help---
Say Y here if you have a [31mCONFIG_USB[0m device that provides normal serial
ports, or acts like a serial device, and you want to connect it to
your [31mCONFIG_USB[0m bus.
Please read <file:Documentation/usb/usb-serial.txt> for more
information on the specifics of the different devices that are
supported, and on how to use them.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called usbserial.
if [31mCONFIG_USB_SERIAL[0m
config [31mCONFIG_USB_SERIAL_CONSOLE[0m
bool "USB Serial Console device support"
depends on [31mCONFIG_USB_SERIAL[0m=y
---help---
If you say Y here, it will be possible to use a [31mCONFIG_USB[0m to serial
converter port as the system console (the system console is the
device which receives all kernel messages and warnings and which
allows logins in single user mode). This could be useful if some
terminal or printer is connected to that serial port.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyUSB0". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
If you don't have a VGA card installed and you say Y here, the
kernel will automatically use the first [31mCONFIG_USB[0m to serial converter
port, /dev/ttyUSB0, as system console.
If unsure, say N.
config [31mCONFIG_USB_SERIAL_GENERIC[0m
bool "USB Generic Serial Driver"
help
Say Y here if you want to use the generic [31mCONFIG_USB[0m serial driver. Please
read <file:Documentation/usb/usb-serial.txt> for more information on
using this driver. It is recommended that the "USB Serial converter
support" be compiled as a module for this driver to be used
properly.
config [31mCONFIG_USB_SERIAL_SIMPLE[0m
tristate "USB Serial Simple Driver"
help
Say Y here to use the [31mCONFIG_USB[0m serial "simple" driver. This driver
handles a wide range of very simple devices, all in one
driver. Specifically, it supports:
- Suunto ANT+ [31mCONFIG_USB[0m device.
- Medtronic CareLink [31mCONFIG_USB[0m device
- Fundamental Software dongle.
- Google [31mCONFIG_USB[0m serial devices
- HP4x calculators
- a number of Motorola phones
- Novatel Wireless GPS receivers
- Siemens [31mCONFIG_USB[0m/MPI adapter.
- ViVOtech ViVOpay [31mCONFIG_USB[0m device.
- Infineon Modem Flashloader [31mCONFIG_USB[0m interface
- ZIO Motherboard [31mCONFIG_USB[0m serial interface
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called usb-serial-simple.
config [31mCONFIG_USB_SERIAL_AIRCABLE[0m
tristate "USB AIRcable Bluetooth Dongle Driver"
help
Say Y here if you want to use [31mCONFIG_USB[0m AIRcable Bluetooth Dongle.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called aircable.
config [31mCONFIG_USB_SERIAL_ARK3116[0m
tristate "USB ARK Micro 3116 USB Serial Driver"
help
Say Y here if you want to use a ARK Micro 3116 [31mCONFIG_USB[0m to Serial
device.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ark3116
config [31mCONFIG_USB_SERIAL_BELKIN[0m
tristate "USB Belkin and Peracom Single Port Serial Driver"
help
Say Y here if you want to use a Belkin [31mCONFIG_USB[0m Serial single port
adaptor (F5U103 is one of the model numbers) or the Peracom single
port [31mCONFIG_USB[0m to serial adapter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called belkin_sa.
config [31mCONFIG_USB_SERIAL_CH341[0m
tristate "USB Winchiphead CH341 Single Port Serial Driver"
help
Say Y here if you want to use a Winchiphead CH341 single port
[31mCONFIG_USB[0m to serial adapter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ch341.
config [31mCONFIG_USB_SERIAL_WHITEHEAT[0m
tristate "USB ConnectTech WhiteHEAT Serial Driver"
select [31mCONFIG_USB_EZUSB_FX2[0m
help
Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
[31mCONFIG_USB[0m to serial converter device.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called whiteheat.
config [31mCONFIG_USB_SERIAL_DIGI_ACCELEPORT[0m
tristate "USB Digi International AccelePort USB Serial Driver"
---help---
Say Y here if you want to use Digi AccelePort [31mCONFIG_USB[0m 2 or 4 devices,
2 port (plus parallel port) and 4 port [31mCONFIG_USB[0m serial converters. The
parallel port on the [31mCONFIG_USB[0m 2 appears as a third serial port on Linux.
The Digi Acceleport [31mCONFIG_USB[0m 8 is not yet supported by this driver.
This driver works under [31mCONFIG_SMP[0m with the usb-uhci driver. It does not
work under [31mCONFIG_SMP[0m with the uhci driver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called digi_acceleport.
config [31mCONFIG_USB_SERIAL_CP210X[0m
tristate "USB CP210x family of UART Bridge Controllers"
help
Say Y here if you want to use a CP2101/CP2102/CP2103 based [31mCONFIG_USB[0m
to RS232 converters.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cp210x.
config [31mCONFIG_USB_SERIAL_CYPRESS_M8[0m
tristate "USB Cypress M8 USB Serial Driver"
help
Say Y here if you want to use a device that contains the Cypress
[31mCONFIG_USB[0m to Serial microcontroller, such as the DeLorme Earthmate GPS.
Attempted [31mCONFIG_SMP[0m support... send bug reports!
Supported microcontrollers in the CY4601 family are:
CY7C63741 CY7C63742 CY7C63743 CY7C64013
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cypress_m8.
config [31mCONFIG_USB_SERIAL_EMPEG[0m
tristate "USB Empeg empeg-car Mark I/II Driver"
help
Say Y here if you want to connect to your Empeg empeg-car Mark I/II
mp3 player via [31mCONFIG_USB[0m. The driver uses a single ttyUSB{0,1,2,...}
device node. See <file:Documentation/usb/usb-serial.txt> for more
tidbits of information.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called empeg.
config [31mCONFIG_USB_SERIAL_FTDI_SIO[0m
tristate "USB FTDI Single Port Serial Driver"
---help---
Say Y here if you want to use a FTDI SIO single port [31mCONFIG_USB[0m to serial
converter device. The implementation I have is called the USC-1000.
This driver has also been tested with the 245 and 232 devices.
See <http://ftdi-usb-sio.sourceforge.net/> for more
information on this driver and the device.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ftdi_sio.
config [31mCONFIG_USB_SERIAL_VISOR[0m
tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
help
Say Y here if you want to connect to your HandSpring Visor, Palm
m500 or m505 through its [31mCONFIG_USB[0m docking station. See
<http://usbvisor.sourceforge.net/index.php3> for more information on using this
driver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called visor.
config [31mCONFIG_USB_SERIAL_IPAQ[0m
tristate "USB PocketPC PDA Driver"
help
Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
or any other PDA running Windows CE 3.0 or PocketPC 2002
using a [31mCONFIG_USB[0m cradle/cable. For information on using the driver,
read <file:Documentation/usb/usb-serial.txt>.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ipaq.
config [31mCONFIG_USB_SERIAL_IR[0m
tristate "USB IR Dongle Serial Driver"
help
Say Y here if you want to enable simple serial support for [31mCONFIG_USB[0m IrDA
devices. This is useful if you do not want to use the full IrDA
stack.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ir-usb.
config [31mCONFIG_USB_SERIAL_EDGEPORT[0m
tristate "USB Inside Out Edgeport Serial Driver"
---help---
Say Y here if you want to use any of the following devices from
Inside Out Networks (Digi):
Edgeport/4
Rapidport/4
Edgeport/4t
Edgeport/2
Edgeport/4i
Edgeport/2i
Edgeport/421
Edgeport/21
Edgeport/8
Edgeport/8 Dual
Edgeport/2D8
Edgeport/4D8
Edgeport/8i
Edgeport/2 DIN
Edgeport/4 DIN
Edgeport/16 Dual
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called io_edgeport.
config [31mCONFIG_USB_SERIAL_EDGEPORT_TI[0m
tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
help
Say Y here if you want to use any of the devices from Inside Out
Networks (Digi) that are not supported by the io_edgeport driver.
This includes the Edgeport/1 device.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called io_ti.
config [31mCONFIG_USB_SERIAL_F81232[0m
tristate "USB Fintek F81232 Single Port Serial Driver"
help
Say Y here if you want to use the Fintek F81232 single
port usb to serial adapter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called f81232.
config [31mCONFIG_USB_SERIAL_F8153X[0m
tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
help
Say Y here if you want to use the Fintek F81532/534 Multi-Ports
[31mCONFIG_USB[0m to serial adapter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called f81534.
config [31mCONFIG_USB_SERIAL_GARMIN[0m
tristate "USB Garmin GPS driver"
help
Say Y here if you want to connect to your Garmin GPS.
Should work with most Garmin GPS devices which have a native [31mCONFIG_USB[0m port.
See <http://sourceforge.net/projects/garmin-gps> for the latest
version of the driver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called garmin_gps.
config [31mCONFIG_USB_SERIAL_IPW[0m
tristate "USB IPWireless (3G UMTS TDD) Driver"
select [31mCONFIG_USB_SERIAL_WWAN[0m
help
Say Y here if you want to use a IPWireless [31mCONFIG_USB[0m modem such as
the ones supplied by Axity3G/Sentech South Africa.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ipw.
config [31mCONFIG_USB_SERIAL_IUU[0m
tristate "USB Infinity USB Unlimited Phoenix Driver"
help
Say Y here if you want to use a IUU in phoenix mode and get
an extra ttyUSBx device. More information available on
http://eczema.ecze.com/iuu_phoenix.html
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called iuu_phoenix.o
config [31mCONFIG_USB_SERIAL_KEYSPAN_PDA[0m
tristate "USB Keyspan PDA Single Port Serial Driver"
select [31mCONFIG_USB_EZUSB_FX2[0m
help
Say Y here if you want to use a Keyspan PDA single port [31mCONFIG_USB[0m to
serial converter device. This driver makes use of firmware
developed from scratch by Brian Warner.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called keyspan_pda.
config [31mCONFIG_USB_SERIAL_KEYSPAN[0m
tristate "USB Keyspan USA-xxx Serial Driver"
select [31mCONFIG_USB_EZUSB_FX2[0m
---help---
Say Y here if you want to use Keyspan [31mCONFIG_USB[0m to serial converter
devices. This driver makes use of Keyspan's official firmware
and was developed with their support. You must also include
firmware to support your particular device(s).
See <http://blemings.org/hugh/keyspan.html> for more information.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called keyspan.
config [31mCONFIG_USB_SERIAL_KEYSPAN_MPR[0m
bool "USB Keyspan MPR Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the Keyspan MPR converter.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA28[0m
bool "USB Keyspan USA-28 Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-28 converter.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA28X[0m
bool "USB Keyspan USA-28X Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-28X converter.
Be sure you have a USA-28X, there are also 28XA and 28XB
models, the label underneath has the actual part number.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA28XA[0m
bool "USB Keyspan USA-28XA Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-28XA converter.
Be sure you have a USA-28XA, there are also 28X and 28XB
models, the label underneath has the actual part number.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA28XB[0m
bool "USB Keyspan USA-28XB Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-28XB converter.
Be sure you have a USA-28XB, there are also 28X and 28XA
models, the label underneath has the actual part number.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA19[0m
bool "USB Keyspan USA-19 Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-19 converter.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA18X[0m
bool "USB Keyspan USA-18X Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-18X converter.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA19W[0m
bool "USB Keyspan USA-19W Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-19W converter.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA19QW[0m
bool "USB Keyspan USA-19QW Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-19QW converter.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA19QI[0m
bool "USB Keyspan USA-19QI Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-19QI converter.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA49W[0m
bool "USB Keyspan USA-49W Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-49W converter.
config [31mCONFIG_USB_SERIAL_KEYSPAN_USA49WLC[0m
bool "USB Keyspan USA-49WLC Firmware"
depends on [31mCONFIG_USB_SERIAL_KEYSPAN[0m && [31mCONFIG_FIRMWARE_IN_KERNEL[0m
help
Say Y here to include firmware for the USA-49WLC converter.
config [31mCONFIG_USB_SERIAL_KLSI[0m
tristate "USB KL5KUSB105 (Palmconnect) Driver"
---help---
Say Y here if you want to use a KL5KUSB105 - based single port
serial adapter. The most widely known -- and currently the only
tested -- device in this category is the PalmConnect [31mCONFIG_USB[0m Serial
adapter sold by Palm Inc. for use with their Palm III and Palm V
series PDAs.
Please read <file:Documentation/usb/usb-serial.txt> for more
information.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called kl5kusb105.
config [31mCONFIG_USB_SERIAL_KOBIL_SCT[0m
tristate "USB KOBIL chipcard reader"
---help---
Say Y here if you want to use one of the following KOBIL [31mCONFIG_USB[0m chipcard
readers:
- [31mCONFIG_USB[0m TWIN
- KAAN Standard Plus
- KAAN SIM
- SecOVID Reader Plus
- B1 Professional
- KAAN Professional
Note that you need a current CT-API.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called kobil_sct.
config [31mCONFIG_USB_SERIAL_MCT_U232[0m
tristate "USB MCT Single Port Serial Driver"
---help---
Say Y here if you want to use a [31mCONFIG_USB[0m Serial single port adapter from
Magic Control Technology Corp. (U232 is one of the model numbers).
This driver also works with Sitecom U232-P25 and [31mCONFIG_D[0m-Link DU-H3SP [31mCONFIG_USB[0m
BAY, Belkin F5U109, and Belkin F5U409 devices.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called mct_u232.
config [31mCONFIG_USB_SERIAL_METRO[0m
tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
---help---
Say Y here if you want to use a [31mCONFIG_USB[0m POS Metrologic barcode scanner.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called metro-usb.
config [31mCONFIG_USB_SERIAL_MOS7720[0m
tristate "USB Moschip 7720 Serial Driver"
---help---
Say Y here if you want to use [31mCONFIG_USB[0m Serial single and double
port adapters from Moschip Semiconductor Tech.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called mos7720.
config [31mCONFIG_USB_SERIAL_MOS7715_PARPORT[0m
bool "Support for parallel port on the Moschip 7715"
depends on [31mCONFIG_USB_SERIAL_MOS7720[0m
depends on [31mCONFIG_PARPORT[0m=y || [31mCONFIG_PARPORT[0m=[31mCONFIG_USB_SERIAL_MOS7720[0m
select [31mCONFIG_PARPORT_NOT_PC[0m
---help---
Say Y if you have a Moschip 7715 device and would like to use
the parallel port it provides. The port will register with
the parport subsystem as a low-level driver.
config [31mCONFIG_USB_SERIAL_MOS7840[0m
tristate "USB Moschip 7840/7820 USB Serial Driver"
---help---
Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
Dual-Serial port device from MosChip Semiconductor.
The MCS7840 and MCS7820 have been developed to connect a wide range
of standard serial devices to a [31mCONFIG_USB[0m host. The MCS7840 has a [31mCONFIG_USB[0m
device controller connected to four (4) individual UARTs while the
MCS7820 controller connects to two (2) individual UARTs.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called mos7840. If unsure, choose N.
config [31mCONFIG_USB_SERIAL_MXUPORT[0m
tristate "USB Moxa UPORT Serial Driver"
---help---
Say Y here if you want to use a MOXA UPort Serial hub.
This driver supports:
[2 Port]
- UPort 1250 : 2 Port RS-232/422/485 [31mCONFIG_USB[0m to Serial Hub
- UPort 1250I : 2 Port RS-232/422/485 [31mCONFIG_USB[0m to Serial Hub with
Isolation
[4 Port]
- UPort 1410 : 4 Port RS-232 [31mCONFIG_USB[0m to Serial Hub
- UPort 1450 : 4 Port RS-232/422/485 [31mCONFIG_USB[0m to Serial Hub
- UPort 1450I : 4 Port RS-232/422/485 [31mCONFIG_USB[0m to Serial Hub with
Isolation
[8 Port]
- UPort 1610-8 : 8 Port RS-232 [31mCONFIG_USB[0m to Serial Hub
- UPort 1650-8 : 8 Port RS-232/422/485 [31mCONFIG_USB[0m to Serial Hub
[16 Port]
- UPort 1610-16 : 16 Port RS-232 [31mCONFIG_USB[0m to Serial Hub
- UPort 1650-16 : 16 Port RS-232/422/485 [31mCONFIG_USB[0m to Serial Hub
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called mxuport.
config [31mCONFIG_USB_SERIAL_NAVMAN[0m
tristate "USB Navman GPS device"
help
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called navman.
config [31mCONFIG_USB_SERIAL_PL2303[0m
tristate "USB Prolific 2303 Single Port Serial Driver"
help
Say Y here if you want to use the PL2303 [31mCONFIG_USB[0m Serial single port
adapter from Prolific.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called pl2303.
config [31mCONFIG_USB_SERIAL_OTI6858[0m
tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
help
Say Y here if you want to use the OTi-6858 single port [31mCONFIG_USB[0m to serial
converter device.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called oti6858.
config [31mCONFIG_USB_SERIAL_QCAUX[0m
tristate "USB Qualcomm Auxiliary Serial Port Driver"
help
Say Y here if you want to use the auxiliary serial ports provided
by many modems based on Qualcomm chipsets. These ports often use
a proprietary protocol called DM and cannot be used for AT- or
[31mCONFIG_PPP[0m-based communication.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called qcaux. If unsure, choose N.
config [31mCONFIG_USB_SERIAL_QUALCOMM[0m
tristate "USB Qualcomm Serial modem"
select [31mCONFIG_USB_SERIAL_WWAN[0m
help
Say Y here if you have a Qualcomm [31mCONFIG_USB[0m modem device. These are
usually wireless cellular modems.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called qcserial.
config [31mCONFIG_USB_SERIAL_SPCP8X5[0m
tristate "USB SPCP8x5 USB To Serial Driver"
help
Say Y here if you want to use the spcp8x5 converter chip. This is
commonly found in some Z-Wave [31mCONFIG_USB[0m devices.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called spcp8x5.
config [31mCONFIG_USB_SERIAL_SAFE[0m
tristate "USB Safe Serial (Encapsulated) Driver"
config [31mCONFIG_USB_SERIAL_SAFE_PADDED[0m
bool "USB Secure Encapsulated Driver - Padded"
depends on [31mCONFIG_USB_SERIAL_SAFE[0m
config [31mCONFIG_USB_SERIAL_SIERRAWIRELESS[0m
tristate "USB Sierra Wireless Driver"
help
Say [31mCONFIG_M[0m here if you want to use Sierra Wireless devices.
Many devices have a feature known as TRU-Install. For those devices
to work properly, the [31mCONFIG_USB[0m Storage Sierra feature must be enabled.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called sierra.
config [31mCONFIG_USB_SERIAL_SYMBOL[0m
tristate "USB Symbol Barcode driver (serial mode)"
help
Say Y here if you want to use a Symbol [31mCONFIG_USB[0m Barcode device
in serial emulation mode.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called symbolserial.
config [31mCONFIG_USB_SERIAL_TI[0m
tristate "USB TI 3410/5052 Serial Driver"
help
Say Y here if you want to use the TI [31mCONFIG_USB[0m 3410 or 5052
serial devices.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ti_usb_3410_5052.
config [31mCONFIG_USB_SERIAL_CYBERJACK[0m
tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
---help---
Say Y here if you want to use a cyberJack pinpad/e-com [31mCONFIG_USB[0m chipcard
reader. This is an interface to ISO 7816 compatible contact-based
chipcards, e.g. GSM SIMs.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cyberjack.
If unsure, say N.
config [31mCONFIG_USB_SERIAL_XIRCOM[0m
tristate "USB Xircom / Entrega Single Port Serial Driver"
select [31mCONFIG_USB_EZUSB_FX2[0m
help
Say Y here if you want to use a Xircom or Entrega single port [31mCONFIG_USB[0m to
serial converter device. This driver makes use of firmware
developed from scratch by Brian Warner.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called keyspan_pda.
config [31mCONFIG_USB_SERIAL_WWAN[0m
tristate
config [31mCONFIG_USB_SERIAL_OPTION[0m
tristate "USB driver for GSM and CDMA modems"
select [31mCONFIG_USB_SERIAL_WWAN[0m
help
Say Y here if you have a GSM or CDMA modem that's connected to [31mCONFIG_USB[0m.
This driver also supports several [31mCONFIG_PCMCIA[0m cards which have a
built-in OHCI-[31mCONFIG_USB[0m adapter and an internally-connected GSM modem.
The [31mCONFIG_USB[0m bus on these cards is not accessible externally.
Supported devices include (some of?) those made by:
Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called option.
If this driver doesn't recognize your device,
it might be accessible via the FTDI_SIO driver.
config [31mCONFIG_USB_SERIAL_OMNINET[0m
tristate "USB ZyXEL omni.net LCD Plus Driver"
help
Say Y here if you want to use a ZyXEL omni.net LCD [31mCONFIG_ISDN[0m TA.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called omninet.
config [31mCONFIG_USB_SERIAL_OPTICON[0m
tristate "USB Opticon Barcode driver (serial mode)"
help
Say Y here if you want to use a Opticon [31mCONFIG_USB[0m Barcode device
in serial emulation mode.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called opticon.
config [31mCONFIG_USB_SERIAL_XSENS_MT[0m
tristate "Xsens motion tracker serial interface driver"
help
Say Y here if you want to use Xsens motion trackers.
This driver supports the new generation of motion trackers
by Xsens. Older devices can be accessed using the FTDI_SIO
driver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called xsens_mt.
config [31mCONFIG_USB_SERIAL_WISHBONE[0m
tristate "USB-Wishbone adapter interface driver"
help
Say Y here if you want to use a [31mCONFIG_USB[0m attached Wishbone bus.
Wishbone is an open hardware SoC bus commonly used in [31mCONFIG_FPGA[0m
designs. Bus access can be serialized using the Etherbone
protocol <http://www.ohwr.org/projects/etherbone-core>.
This driver is intended to be used with devices which attach
their internal Wishbone bus to a [31mCONFIG_USB[0m serial interface using
the Etherbone protocol. [31mCONFIG_A[0m userspace library is required to
speak the protocol made available by this driver as ttyUSBx.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called wishbone-serial.
config [31mCONFIG_USB_SERIAL_SSU100[0m
tristate "USB Quatech SSU-100 Single Port Serial Driver"
help
Say Y here if you want to use the Quatech SSU-100 single
port usb to serial adapter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ssu100.
config [31mCONFIG_USB_SERIAL_QT2[0m
tristate "USB Quatech Serial Driver for USB 2 devices"
help
Say Y here if you want to use the Quatech [31mCONFIG_USB[0m 2
serial adapters.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called quatech-serial.
config [31mCONFIG_USB_SERIAL_DEBUG[0m
tristate "USB Debugging Device"
help
Say Y here if you have a [31mCONFIG_USB[0m debugging device used to receive
debugging data from another machine. The most common of these
devices is the NetChip TurboCONNECT device.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called usb-debug.
endif # [31mCONFIG_USB_SERIAL[0m