menuconfig [31mCONFIG_SND_SOC_SAMSUNG[0m
tristate "ASoC support for Samsung"
depends on [31mCONFIG_PLAT_SAMSUNG[0m || [31mCONFIG_ARCH_EXYNOS[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_COMMON_CLK[0m
select [31mCONFIG_SND_SOC_GENERIC_DMAENGINE_PCM[0m
---help---
Say Y or [31mCONFIG_M[0m if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
select the audio interfaces to support below.
if [31mCONFIG_SND_SOC_SAMSUNG[0m
config [31mCONFIG_SND_S3C24XX_I2S[0m
tristate
config [31mCONFIG_SND_S3C_I2SV2_SOC[0m
tristate
config [31mCONFIG_SND_S3C2412_SOC_I2S[0m
tristate
select [31mCONFIG_SND_S3C_I2SV2_SOC[0m
config [31mCONFIG_SND_SAMSUNG_PCM[0m
tristate "Samsung PCM interface support"
config [31mCONFIG_SND_SAMSUNG_SPDIF[0m
tristate "Samsung SPDIF transmitter support"
select [31mCONFIG_SND_SOC_SPDIF[0m
config [31mCONFIG_SND_SAMSUNG_I2S[0m
tristate "Samsung I2S interface support"
config [31mCONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753[0m
tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
depends on [31mCONFIG_MACH_NEO1973_GTA02[0m
select [31mCONFIG_SND_S3C24XX_I2S[0m
select [31mCONFIG_SND_SOC_WM8753[0m
select [31mCONFIG_SND_SOC_BT_SCO[0m
help
Say Y here to enable audio support for the Openmoko Neo1973
Smartphones.
config [31mCONFIG_SND_SOC_SAMSUNG_JIVE_WM8750[0m
tristate "SoC I2S Audio support for Jive"
depends on [31mCONFIG_MACH_JIVE[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_SND_SOC_WM8750[0m
select [31mCONFIG_SND_S3C2412_SOC_I2S[0m
help
Say Y if you want to add support for SoC audio on the Jive.
config [31mCONFIG_SND_SOC_SAMSUNG_SMDK_WM8580[0m
tristate "SoC I2S Audio support for WM8580 on SMDK"
depends on [31mCONFIG_MACH_SMDK6410[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_SND_SOC_WM8580[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
help
Say Y if you want to add support for SoC audio on the SMDKs.
config [31mCONFIG_SND_SOC_SAMSUNG_SMDK_WM8994[0m
tristate "SoC I2S Audio support for WM8994 on SMDK"
depends on [31mCONFIG_I2C[0m=y
select [31mCONFIG_MFD_WM8994[0m
select [31mCONFIG_SND_SOC_WM8994[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
help
Say Y if you want to add support for SoC audio on the SMDKs.
config [31mCONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X[0m
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
depends on [31mCONFIG_ARCH_S3C24XX[0m
select [31mCONFIG_SND_S3C24XX_I2S[0m
select [31mCONFIG_SND_SOC_L3[0m
select [31mCONFIG_SND_SOC_UDA134X[0m
config [31mCONFIG_SND_SOC_SAMSUNG_SIMTEC[0m
tristate
help
Internal node for common S3C24XX/Simtec suppor
config [31mCONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23[0m
tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
depends on [31mCONFIG_ARCH_S3C24XX[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_SND_S3C24XX_I2S[0m
select [31mCONFIG_SND_SOC_TLV320AIC23_I2C[0m
select [31mCONFIG_SND_SOC_SAMSUNG_SIMTEC[0m
config [31mCONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES[0m
tristate "SoC I2S Audio support for Simtec Hermes board"
depends on [31mCONFIG_ARCH_S3C24XX[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_SND_S3C24XX_I2S[0m
select [31mCONFIG_SND_SOC_TLV320AIC3X[0m
select [31mCONFIG_SND_SOC_SAMSUNG_SIMTEC[0m
config [31mCONFIG_SND_SOC_SAMSUNG_H1940_UDA1380[0m
tristate "Audio support for the HP iPAQ H1940"
depends on [31mCONFIG_ARCH_H1940[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_SND_S3C24XX_I2S[0m
select [31mCONFIG_SND_SOC_UDA1380[0m
help
This driver provides audio support for HP iPAQ h1940 PDA.
config [31mCONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380[0m
tristate "Audio support for the HP iPAQ RX1950"
depends on [31mCONFIG_MACH_RX1950[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_SND_S3C24XX_I2S[0m
select [31mCONFIG_SND_SOC_UDA1380[0m
help
This driver provides audio support for HP iPAQ RX1950 PDA.
config [31mCONFIG_SND_SOC_SMARTQ[0m
tristate "SoC I2S Audio support for SmartQ board"
depends on [31mCONFIG_MACH_SMARTQ[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
select [31mCONFIG_SND_SOC_WM8750[0m
config [31mCONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF[0m
tristate "SoC S/PDIF Audio support for SMDK"
select [31mCONFIG_SND_SAMSUNG_SPDIF[0m
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
config [31mCONFIG_SND_SOC_SMDK_WM8994_PCM[0m
tristate "SoC PCM Audio support for WM8994 on SMDK"
depends on [31mCONFIG_I2C[0m=y
select [31mCONFIG_MFD_WM8994[0m
select [31mCONFIG_SND_SOC_WM8994[0m
select [31mCONFIG_SND_SAMSUNG_PCM[0m
help
Say Y if you want to add support for SoC audio on the SMDK
config [31mCONFIG_SND_SOC_SPEYSIDE[0m
tristate "Audio support for Wolfson Speyside"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_SPI_MASTER[0m
depends on [31mCONFIG_MACH_WLF_CRAGG_6410[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
select [31mCONFIG_SND_SOC_WM8996[0m
select [31mCONFIG_SND_SOC_WM9081[0m
select [31mCONFIG_SND_SOC_WM0010[0m
select [31mCONFIG_SND_SOC_WM1250_EV1[0m
config [31mCONFIG_SND_SOC_TOBERMORY[0m
tristate "Audio support for Wolfson Tobermory"
depends on [31mCONFIG_INPUT[0m && [31mCONFIG_I2C[0m
depends on [31mCONFIG_MACH_WLF_CRAGG_6410[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
select [31mCONFIG_SND_SOC_WM8962[0m
config [31mCONFIG_SND_SOC_BELLS[0m
tristate "Audio support for Wolfson Bells"
depends on [31mCONFIG_MFD_ARIZONA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_SPI_MASTER[0m
depends on [31mCONFIG_MACH_WLF_CRAGG_6410[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
select [31mCONFIG_SND_SOC_WM5102[0m
select [31mCONFIG_SND_SOC_WM5110[0m
select [31mCONFIG_SND_SOC_WM9081[0m
select [31mCONFIG_SND_SOC_WM0010[0m
select [31mCONFIG_SND_SOC_WM1250_EV1[0m
config [31mCONFIG_SND_SOC_LOWLAND[0m
tristate "Audio support for Wolfson Lowland"
depends on [31mCONFIG_I2C[0m
depends on [31mCONFIG_MACH_WLF_CRAGG_6410[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
select [31mCONFIG_SND_SOC_WM5100[0m
select [31mCONFIG_SND_SOC_WM9081[0m
config [31mCONFIG_SND_SOC_LITTLEMILL[0m
tristate "Audio support for Wolfson Littlemill"
depends on [31mCONFIG_I2C[0m
depends on [31mCONFIG_MACH_WLF_CRAGG_6410[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
select [31mCONFIG_MFD_WM8994[0m
select [31mCONFIG_SND_SOC_WM8994[0m
config [31mCONFIG_SND_SOC_SNOW[0m
tristate "Audio support for Google Snow boards"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_SND_SOC_MAX98090[0m
select [31mCONFIG_SND_SOC_MAX98095[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
help
Say Y if you want to add audio support for various Snow
boards based on Exynos5 series of SoCs.
config [31mCONFIG_SND_SOC_ARNDALE_RT5631_ALC5631[0m
tristate "Audio support for RT5631(ALC5631) on Arndale Board"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
select [31mCONFIG_SND_SOC_RT5631[0m
config [31mCONFIG_SND_SOC_SAMSUNG_TM2_WM5110[0m
tristate "SoC I2S Audio support for WM5110 on TM2 board"
depends on [31mCONFIG_SND_SOC_SAMSUNG[0m && [31mCONFIG_MFD_ARIZONA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_SPI_MASTER[0m
select [31mCONFIG_SND_SOC_MAX98504[0m
select [31mCONFIG_SND_SOC_WM5110[0m
select [31mCONFIG_SND_SAMSUNG_I2S[0m
help
Say Y if you want to add support for SoC audio on the TM2 board.
endif #[31mCONFIG_SND_SOC_SAMSUNG[0m