* Renesas R-Car Gen2 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
and several fixed ratio dividers.
The CPG also provides a Clock Domain for SoC devices, in combination with the
CPG Module Stop (MSTP) Clocks.
Required Properties:
- compatible: Must be one of
- "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
- "renesas,r8a7792-cpg-clocks" for the r8a7792 CPG
- "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
- "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
and "renesas,rcar-gen2-cpg-clocks" as a fallback.
- reg: Base address and length of the memory resource used by the CPG
- clocks: References to the parent clocks: first to the EXTAL clock, second
to the USB_EXTAL clock
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "main",
"pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
"adsp"
- #power-domain-cells: Must be 0
SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
through an MSTP clock should refer to the CPG device node in their
"power-domains" property, as documented by the generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
Examples
--------
- CPG device node:
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7790-cpg-clocks",
"renesas,rcar-gen2-cpg-clocks";
reg = <0 0xe6150000 0 0x1000>;
clocks = <&extal_clk &usb_extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0, "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "sd1", "z",
"rcan", "adsp";
#power-domain-cells = <0>;
};
- CPG/MSTP Clock Domain member device node:
thermal@e61f0000 {
compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
power-domains = <&cpg_clocks>;
};