#
# Multimedia Video device configuration
#
if [31mCONFIG_VIDEO_V4L2[0m
config [31mCONFIG_VIDEO_IR_I2C[0m
tristate "I2C module for IR" if ![31mCONFIG_MEDIA_SUBDRV_AUTOSELECT[0m
depends on [31mCONFIG_I2C[0m && [31mCONFIG_RC_CORE[0m
default y
---help---
Most boards have an IR chip directly connected via GPIO. However,
some video boards have the IR connected via [31mCONFIG_I2C[0m bus.
If your board doesn't have an [31mCONFIG_I2C[0m IR chip, you may disable this
option.
In doubt, say Y.
#
# Encoder / Decoder module configuration
#
menu "I2C Encoders, decoders, sensors and other helper chips"
visible if ![31mCONFIG_MEDIA_SUBDRV_AUTOSELECT[0m || [31mCONFIG_COMPILE_TEST[0m
comment "Audio decoders, processors and mixers"
config [31mCONFIG_VIDEO_TVAUDIO[0m
tristate "Simple audio decoder chips"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for several audio decoder chips found on some bt8xx boards:
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
tea6320, tea6420, tda8425, ta8874z.
Microchip: pic16c54 based design on ProVideo PV951 board.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tvaudio.
config [31mCONFIG_VIDEO_TDA7432[0m
tristate "Philips TDA7432 audio processor"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for tda7432 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tda7432.
config [31mCONFIG_VIDEO_TDA9840[0m
tristate "Philips TDA9840 audio processor"
depends on [31mCONFIG_I2C[0m
---help---
Support for tda9840 audio decoder chip found on some Zoran boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tda9840.
config [31mCONFIG_VIDEO_TEA6415C[0m
tristate "Philips TEA6415C audio processor"
depends on [31mCONFIG_I2C[0m
---help---
Support for tea6415c audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tea6415c.
config [31mCONFIG_VIDEO_TEA6420[0m
tristate "Philips TEA6420 audio processor"
depends on [31mCONFIG_I2C[0m
---help---
Support for tea6420 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tea6420.
config [31mCONFIG_VIDEO_MSP3400[0m
tristate "Micronas MSP34xx audio decoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Micronas MSP34xx series of audio decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called msp3400.
config [31mCONFIG_VIDEO_CS3308[0m
tristate "Cirrus Logic CS3308 audio ADC"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Cirrus Logic CS3308 High Performance 8-Channel
Analog Volume Control
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cs3308.
config [31mCONFIG_VIDEO_CS5345[0m
tristate "Cirrus Logic CS5345 audio ADC"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
stereo [31mCONFIG_A[0m/[31mCONFIG_D[0m converter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cs5345.
config [31mCONFIG_VIDEO_CS53L32A[0m
tristate "Cirrus Logic CS53L32A audio ADC"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Cirrus Logic CS53L32A low voltage
stereo [31mCONFIG_A[0m/[31mCONFIG_D[0m converter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cs53l32a.
config [31mCONFIG_VIDEO_TLV320AIC23B[0m
tristate "Texas Instruments TLV320AIC23B audio codec"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Texas Instruments TLV320AIC23B audio codec.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tlv320aic23b.
config [31mCONFIG_VIDEO_UDA1342[0m
tristate "Philips UDA1342 audio codec"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Philips UDA1342 audio codec.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called uda1342.
config [31mCONFIG_VIDEO_WM8775[0m
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Wolfson Microelectronics WM8775 high
performance stereo [31mCONFIG_A[0m/[31mCONFIG_D[0m Converter with a 4 channel input mixer.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called wm8775.
config [31mCONFIG_VIDEO_WM8739[0m
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Wolfson Microelectronics WM8739
stereo [31mCONFIG_A[0m/[31mCONFIG_D[0m Converter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called wm8739.
config [31mCONFIG_VIDEO_VP27SMPX[0m
tristate "Panasonic VP27's internal MPX"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the internal MPX of the Panasonic VP27s tuner.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called vp27smpx.
config [31mCONFIG_VIDEO_SONY_BTF_MPX[0m
tristate "Sony BTF's internal MPX"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the internal MPX of the Sony BTF-PG472Z tuner.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called sony-btf-mpx.
comment "RDS decoders"
config [31mCONFIG_VIDEO_SAA6588[0m
tristate "SAA6588 Radio Chip RDS decoder support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for this Radio Data System ([31mCONFIG_RDS[0m) decoder. This allows
seeing radio station identification transmitted using this
standard.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa6588.
comment "Video decoders"
config [31mCONFIG_VIDEO_ADV7180[0m
tristate "Analog Devices ADV7180 decoder"
depends on [31mCONFIG_GPIOLIB[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
---help---
Support for the Analog Devices ADV7180 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7180.
config [31mCONFIG_VIDEO_ADV7183[0m
tristate "Analog Devices ADV7183 decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
V4l2 subdevice driver for the Analog Devices
ADV7183 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7183.
config [31mCONFIG_VIDEO_ADV7604[0m
tristate "Analog Devices ADV7604 decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_GPIOLIB[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_HDMI[0m
select [31mCONFIG_MEDIA_CEC_EDID[0m
---help---
Support for the Analog Devices ADV7604 video decoder.
This is a Analog Devices Component/Graphics Digitizer
with 4:1 Multiplexed [31mCONFIG_HDMI[0m Receiver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7604.
config [31mCONFIG_VIDEO_ADV7604_CEC[0m
bool "Enable Analog Devices ADV7604 CEC support"
depends on [31mCONFIG_VIDEO_ADV7604[0m && [31mCONFIG_MEDIA_CEC_SUPPORT[0m
---help---
When selected the adv7604 will support the optional
[31mCONFIG_HDMI[0m CEC feature.
config [31mCONFIG_VIDEO_ADV7842[0m
tristate "Analog Devices ADV7842 decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_HDMI[0m
select [31mCONFIG_MEDIA_CEC_EDID[0m
---help---
Support for the Analog Devices ADV7842 video decoder.
This is a Analog Devices Component/Graphics/SD Digitizer
with 2:1 Multiplexed [31mCONFIG_HDMI[0m Receiver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7842.
config [31mCONFIG_VIDEO_ADV7842_CEC[0m
bool "Enable Analog Devices ADV7842 CEC support"
depends on [31mCONFIG_VIDEO_ADV7842[0m && [31mCONFIG_MEDIA_CEC_SUPPORT[0m
---help---
When selected the adv7842 will support the optional
[31mCONFIG_HDMI[0m CEC feature.
config [31mCONFIG_VIDEO_BT819[0m
tristate "BT819A VideoStream decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for BT819A video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called bt819.
config [31mCONFIG_VIDEO_BT856[0m
tristate "BT856 VideoStream decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for BT856 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called bt856.
config [31mCONFIG_VIDEO_BT866[0m
tristate "BT866 VideoStream decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for BT866 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called bt866.
config [31mCONFIG_VIDEO_KS0127[0m
tristate "KS0127 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for KS0127 video decoder.
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ks0127.
config [31mCONFIG_VIDEO_ML86V7667[0m
tristate "OKI ML86V7667 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the OKI Semiconductor ML86V7667 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ml86v7667.
config [31mCONFIG_VIDEO_AD5820[0m
tristate "AD5820 lens voice coil support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
---help---
This is a driver for the AD5820 camera lens voice coil.
It is used for example in Nokia N900 (RX-51).
config [31mCONFIG_VIDEO_SAA7110[0m
tristate "Philips SAA7110 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Philips SAA7110 video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa7110.
config [31mCONFIG_VIDEO_SAA711X[0m
tristate "Philips SAA7111/3/4/5 video decoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Philips SAA7111/3/4/5 video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa7115.
config [31mCONFIG_VIDEO_TC358743[0m
tristate "Toshiba TC358743 decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_HDMI[0m
---help---
Support for the Toshiba TC358743 [31mCONFIG_HDMI[0m to MIPI CSI-2 bridge.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tc358743.
config [31mCONFIG_VIDEO_TVP514X[0m
tristate "Texas Instruments TVP514x video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
decoder. It is currently working with the TI OMAP3 camera
controller.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tvp514x.
config [31mCONFIG_VIDEO_TVP5150[0m
tristate "Texas Instruments TVP5150 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Texas Instruments TVP5150 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tvp5150.
config [31mCONFIG_VIDEO_TVP7002[0m
tristate "Texas Instruments TVP7002 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Texas Instruments TVP7002 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tvp7002.
config [31mCONFIG_VIDEO_TW2804[0m
tristate "Techwell TW2804 multiple video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Techwell tw2804 multiple video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tw2804.
config [31mCONFIG_VIDEO_TW9903[0m
tristate "Techwell TW9903 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Techwell tw9903 multi-standard video decoder
with high quality down scaler.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tw9903.
config [31mCONFIG_VIDEO_TW9906[0m
tristate "Techwell TW9906 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Techwell tw9906 enhanced multi-standard comb filter
video decoder with YCbCr input support.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tw9906.
config [31mCONFIG_VIDEO_VPX3220[0m
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for VPX322x video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called vpx3220.
comment "Video and audio decoders"
config [31mCONFIG_VIDEO_SAA717X[0m
tristate "Philips SAA7171/3/4 audio/video decoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Philips SAA7171/3/4 audio/video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa717x.
source "drivers/media/i2c/cx25840/Kconfig"
comment "Video encoders"
config [31mCONFIG_VIDEO_SAA7127[0m
tristate "Philips SAA7127/9 digital video encoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Philips SAA7127/9 digital video encoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa7127.
config [31mCONFIG_VIDEO_SAA7185[0m
tristate "Philips SAA7185 video encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Philips SAA7185 video encoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa7185.
config [31mCONFIG_VIDEO_ADV7170[0m
tristate "Analog Devices ADV7170 video encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Analog Devices ADV7170 video encoder driver
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7170.
config [31mCONFIG_VIDEO_ADV7175[0m
tristate "Analog Devices ADV7175 video encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Analog Devices ADV7175 video encoder driver
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7175.
config [31mCONFIG_VIDEO_ADV7343[0m
tristate "ADV7343 video encoder"
depends on [31mCONFIG_I2C[0m
help
Support for Analog Devices [31mCONFIG_I2C[0m bus based ADV7343 encoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7343.
config [31mCONFIG_VIDEO_ADV7393[0m
tristate "ADV7393 video encoder"
depends on [31mCONFIG_I2C[0m
help
Support for Analog Devices [31mCONFIG_I2C[0m bus based ADV7393 encoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7393.
config [31mCONFIG_VIDEO_ADV7511[0m
tristate "Analog Devices ADV7511 encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_HDMI[0m
select [31mCONFIG_MEDIA_CEC_EDID[0m
---help---
Support for the Analog Devices ADV7511 video encoder.
This is a Analog Devices [31mCONFIG_HDMI[0m transmitter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7511.
config [31mCONFIG_VIDEO_ADV7511_CEC[0m
bool "Enable Analog Devices ADV7511 CEC support"
depends on [31mCONFIG_VIDEO_ADV7511[0m && [31mCONFIG_MEDIA_CEC_SUPPORT[0m
---help---
When selected the adv7511 will support the optional
[31mCONFIG_HDMI[0m CEC feature.
config [31mCONFIG_VIDEO_AD9389B[0m
tristate "Analog Devices AD9389B encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
---help---
Support for the Analog Devices AD9389B video encoder.
This is a Analog Devices [31mCONFIG_HDMI[0m transmitter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ad9389b.
config [31mCONFIG_VIDEO_AK881X[0m
tristate "AK8813/AK8814 video encoders"
depends on [31mCONFIG_I2C[0m
help
Video output driver for AKM AK8813 and AK8814 TV encoders
config [31mCONFIG_VIDEO_THS8200[0m
tristate "Texas Instruments THS8200 video encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Texas Instruments THS8200 video encoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ths8200.
comment "Camera sensor devices"
config [31mCONFIG_VIDEO_APTINA_PLL[0m
tristate
config [31mCONFIG_VIDEO_SMIAPP_PLL[0m
tristate
config [31mCONFIG_VIDEO_OV2659[0m
tristate "OmniVision OV2659 sensor support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV2659 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov2659.
config [31mCONFIG_VIDEO_OV7640[0m
tristate "OmniVision OV7640 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV7640 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov7640.
config [31mCONFIG_VIDEO_OV7670[0m
tristate "OmniVision OV7670 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
config [31mCONFIG_VIDEO_OV9650[0m
tristate "OmniVision OV9650/OV9652 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
---help---
This is a V4L2 sensor-level driver for the Omnivision
OV9650 and OV9652 camera sensors.
config [31mCONFIG_VIDEO_VS6624[0m
tristate "ST VS6624 sensor support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This is a Video4Linux2 sensor-level driver for the ST VS6624
camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called vs6624.
config [31mCONFIG_VIDEO_MT9M032[0m
tristate "MT9M032 camera sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_VIDEO_APTINA_PLL[0m
---help---
This driver supports MT9M032 camera sensors from Aptina, monochrome
models only.
config [31mCONFIG_VIDEO_MT9M111[0m
tristate "mt9m111, mt9m112 and mt9m131 support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
help
This driver supports MT9M111, MT9M112 and MT9M131 cameras from
Micron/Aptina
config [31mCONFIG_VIDEO_MT9P031[0m
tristate "Aptina MT9P031 support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_VIDEO_APTINA_PLL[0m
---help---
This is a Video4Linux2 sensor-level driver for the Aptina
(Micron) mt9p031 5 Mpixel camera.
config [31mCONFIG_VIDEO_MT9T001[0m
tristate "Aptina MT9T001 support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This is a Video4Linux2 sensor-level driver for the Aptina
(Micron) mt0t001 3 Mpixel camera.
config [31mCONFIG_VIDEO_MT9V011[0m
tristate "Micron mt9v011 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This is a Video4Linux2 sensor-level driver for the Micron
mt0v011 1.3 Mpixel camera. It currently only works with the
em28xx driver.
config [31mCONFIG_VIDEO_MT9V032[0m
tristate "Micron MT9V032 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_REGMAP_I2C[0m
---help---
This is a Video4Linux2 sensor-level driver for the Micron
MT9V032 752x480 CMOS sensor.
config [31mCONFIG_VIDEO_SR030PC30[0m
tristate "Siliconfile SR030PC30 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This driver supports SR030PC30 VGA camera from Siliconfile
config [31mCONFIG_VIDEO_NOON010PC30[0m
tristate "Siliconfile NOON010PC30 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This driver supports NOON010PC30 CIF camera from Siliconfile
source "drivers/media/i2c/m5mols/Kconfig"
config [31mCONFIG_VIDEO_S5K6AA[0m
tristate "Samsung S5K6AAFX sensor support"
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
---help---
This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
config [31mCONFIG_VIDEO_S5K6A3[0m
tristate "Samsung S5K6A3 sensor support"
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
---help---
This is a V4L2 sensor-level driver for Samsung S5K6A3 raw
camera sensor.
config [31mCONFIG_VIDEO_S5K4ECGX[0m
tristate "Samsung S5K4ECGX sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_CRC32[0m
---help---
This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M
camera sensor with an embedded SoC image signal processor.
config [31mCONFIG_VIDEO_S5K5BAF[0m
tristate "Samsung S5K5BAF sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
---help---
This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M
camera sensor with an embedded SoC image signal processor.
source "drivers/media/i2c/smiapp/Kconfig"
config [31mCONFIG_VIDEO_S5C73M3[0m
tristate "Samsung S5C73M3 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_SPI[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
---help---
This is a V4L2 sensor-level driver for Samsung S5C73M3
8 Mpixel camera.
comment "Flash devices"
config [31mCONFIG_VIDEO_ADP1653[0m
tristate "ADP1653 flash support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This is a driver for the ADP1653 flash controller. It is used for
example in Nokia N900.
config [31mCONFIG_VIDEO_AS3645A[0m
tristate "AS3645A flash driver support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
---help---
This is a driver for the AS3645A and LM3555 flash controllers. It has
build in control for flash, torch and indicator LEDs.
config [31mCONFIG_VIDEO_LM3560[0m
tristate "LM3560 dual flash driver support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_REGMAP_I2C[0m
---help---
This is a driver for the lm3560 dual flash controllers. It controls
flash, torch LEDs.
config [31mCONFIG_VIDEO_LM3646[0m
tristate "LM3646 dual flash driver support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_REGMAP_I2C[0m
---help---
This is a driver for the lm3646 dual flash controllers. It controls
flash, torch LEDs.
comment "Video improvement chips"
config [31mCONFIG_VIDEO_UPD64031A[0m
tristate "NEC Electronics uPD64031A Ghost Reduction"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in [31mCONFIG_NTSC[0m TV cards made for
Japan and is used to reduce the 'ghosting' effect that can
be present in analog TV broadcasts.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called upd64031a.
config [31mCONFIG_VIDEO_UPD64083[0m
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/[31mCONFIG_C[0m
separation video chip. It is used to improve the quality of
the colors of a composite signal.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called upd64083.
comment "Audio/Video compression chips"
config [31mCONFIG_VIDEO_SAA6752HS[0m
tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_CRC32[0m
---help---
Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
audio encoder with multiplexer.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa6752hs.
comment "Miscellaneous helper chips"
config [31mCONFIG_VIDEO_THS7303[0m
tristate "THS7303/53 Video Amplifier"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for TI THS7303/53 video amplifier
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ths7303.
config [31mCONFIG_VIDEO_M52790[0m
tristate "Mitsubishi M52790 A/V switch"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
---help---
Support for the Mitsubishi M52790 [31mCONFIG_A[0m/V switch.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called m52790.
endmenu
menu "Sensors used on soc_camera driver"
if [31mCONFIG_SOC_CAMERA[0m
source "drivers/media/i2c/soc_camera/Kconfig"
endif
endmenu
endif