1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 | /* * Broadcom Starfighter 2 switch register defines * * Copyright (C) 2014, Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #ifndef __BCM_SF2_REGS_H #define __BCM_SF2_REGS_H /* Register set relative to 'REG' */ #define REG_SWITCH_CNTRL 0x00 #define MDIO_MASTER_SEL (1 << 0) #define REG_SWITCH_STATUS 0x04 #define REG_DIR_DATA_WRITE 0x08 #define REG_DIR_DATA_READ 0x0C #define REG_SWITCH_REVISION 0x18 #define SF2_REV_MASK 0xffff #define SWITCH_TOP_REV_SHIFT 16 #define SWITCH_TOP_REV_MASK 0xffff #define REG_PHY_REVISION 0x1C #define PHY_REVISION_MASK 0xffff #define REG_SPHY_CNTRL 0x2C #define IDDQ_BIAS (1 << 0) #define EXT_PWR_DOWN (1 << 1) #define FORCE_DLL_EN (1 << 2) #define IDDQ_GLOBAL_PWR (1 << 3) #define CK25_DIS (1 << 4) #define PHY_RESET (1 << 5) #define PHY_PHYAD_SHIFT 8 #define PHY_PHYAD_MASK 0x1F #define REG_RGMII_0_BASE 0x34 #define REG_RGMII_CNTRL 0x00 #define REG_RGMII_IB_STATUS 0x04 #define REG_RGMII_RX_CLOCK_DELAY_CNTRL 0x08 #define REG_RGMII_CNTRL_SIZE 0x0C #define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_BASE + \ ((x) * REG_RGMII_CNTRL_SIZE)) /* Relative to REG_RGMII_CNTRL */ #define RGMII_MODE_EN (1 << 0) #define ID_MODE_DIS (1 << 1) #define PORT_MODE_SHIFT 2 #define INT_EPHY (0 << PORT_MODE_SHIFT) #define INT_GPHY (1 << PORT_MODE_SHIFT) #define EXT_EPHY (2 << PORT_MODE_SHIFT) #define EXT_GPHY (3 << PORT_MODE_SHIFT) #define EXT_REVMII (4 << PORT_MODE_SHIFT) #define PORT_MODE_MASK 0x7 #define RVMII_REF_SEL (1 << 5) #define RX_PAUSE_EN (1 << 6) #define TX_PAUSE_EN (1 << 7) #define TX_CLK_STOP_EN (1 << 8) #define LPI_COUNT_SHIFT 9 #define LPI_COUNT_MASK 0x3F #define REG_LED_CNTRL_BASE 0x90 #define REG_LED_CNTRL(x) (REG_LED_CNTRL_BASE + (x) * 4) #define SPDLNK_SRC_SEL (1 << 24) /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */ #define INTRL2_CPU_STATUS 0x00 #define INTRL2_CPU_SET 0x04 #define INTRL2_CPU_CLEAR 0x08 #define INTRL2_CPU_MASK_STATUS 0x0c #define INTRL2_CPU_MASK_SET 0x10 #define INTRL2_CPU_MASK_CLEAR 0x14 /* Shared INTRL2_0 and INTRL2_ interrupt sources macros */ #define P_LINK_UP_IRQ(x) (1 << (0 + (x))) #define P_LINK_DOWN_IRQ(x) (1 << (1 + (x))) #define P_ENERGY_ON_IRQ(x) (1 << (2 + (x))) #define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x))) #define P_GPHY_IRQ(x) (1 << (4 + (x))) #define P_NUM_IRQ 5 #define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \ P_LINK_DOWN_IRQ((x)) | \ P_ENERGY_ON_IRQ((x)) | \ P_ENERGY_OFF_IRQ((x)) | \ P_GPHY_IRQ((x))) /* INTRL2_0 interrupt sources */ #define P0_IRQ_OFF 0 #define MEM_DOUBLE_IRQ (1 << 5) #define EEE_LPI_IRQ (1 << 6) #define P5_CPU_WAKE_IRQ (1 << 7) #define P8_CPU_WAKE_IRQ (1 << 8) #define P7_CPU_WAKE_IRQ (1 << 9) #define IEEE1588_IRQ (1 << 10) #define MDIO_ERR_IRQ (1 << 11) #define MDIO_DONE_IRQ (1 << 12) #define GISB_ERR_IRQ (1 << 13) #define UBUS_ERR_IRQ (1 << 14) #define FAILOVER_ON_IRQ (1 << 15) #define FAILOVER_OFF_IRQ (1 << 16) #define TCAM_SOFT_ERR_IRQ (1 << 17) /* INTRL2_1 interrupt sources */ #define P7_IRQ_OFF 0 #define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ) /* Register set relative to 'CORE' */ #define CORE_G_PCTL_PORT0 0x00000 #define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4)) #define CORE_IMP_CTL 0x00020 #define RX_DIS (1 << 0) #define TX_DIS (1 << 1) #define RX_BCST_EN (1 << 2) #define RX_MCST_EN (1 << 3) #define RX_UCST_EN (1 << 4) #define CORE_SWMODE 0x0002c #define SW_FWDG_MODE (1 << 0) #define SW_FWDG_EN (1 << 1) #define RTRY_LMT_DIS (1 << 2) #define CORE_STS_OVERRIDE_IMP 0x00038 #define GMII_SPEED_UP_2G (1 << 6) #define MII_SW_OR (1 << 7) #define CORE_NEW_CTRL 0x00084 #define IP_MC (1 << 0) #define OUTRANGEERR_DISCARD (1 << 1) #define INRANGEERR_DISCARD (1 << 2) #define CABLE_DIAG_LEN (1 << 3) #define OVERRIDE_AUTO_PD_WAR (1 << 4) #define EN_AUTO_PD_WAR (1 << 5) #define UC_FWD_EN (1 << 6) #define MC_FWD_EN (1 << 7) #define CORE_SWITCH_CTRL 0x00088 #define MII_DUMB_FWDG_EN (1 << 6) #define CORE_SFT_LRN_CTRL 0x000f8 #define SW_LEARN_CNTL(x) (1 << (x)) #define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4) #define LINK_STS (1 << 0) #define DUPLX_MODE (1 << 1) #define SPEED_SHIFT 2 #define SPEED_MASK 0x3 #define RXFLOW_CNTL (1 << 4) #define TXFLOW_CNTL (1 << 5) #define SW_OVERRIDE (1 << 6) #define CORE_WATCHDOG_CTRL 0x001e4 #define SOFTWARE_RESET (1 << 7) #define EN_CHIP_RST (1 << 6) #define EN_SW_RESET (1 << 4) #define CORE_FAST_AGE_CTRL 0x00220 #define EN_FAST_AGE_STATIC (1 << 0) #define EN_AGE_DYNAMIC (1 << 1) #define EN_AGE_PORT (1 << 2) #define EN_AGE_VLAN (1 << 3) #define EN_AGE_SPT (1 << 4) #define EN_AGE_MCAST (1 << 5) #define FAST_AGE_STR_DONE (1 << 7) #define CORE_FAST_AGE_PORT 0x00224 #define AGE_PORT_MASK 0xf #define CORE_FAST_AGE_VID 0x00228 #define AGE_VID_MASK 0x3fff #define CORE_LNKSTS 0x00400 #define LNK_STS_MASK 0x1ff #define CORE_SPDSTS 0x00410 #define SPDSTS_10 0 #define SPDSTS_100 1 #define SPDSTS_1000 2 #define SPDSTS_SHIFT 2 #define SPDSTS_MASK 0x3 #define CORE_DUPSTS 0x00420 #define CORE_DUPSTS_MASK 0x1ff #define CORE_PAUSESTS 0x00428 #define PAUSESTS_TX_PAUSE_SHIFT 9 #define CORE_GMNCFGCFG 0x0800 #define RST_MIB_CNT (1 << 0) #define RXBPDU_EN (1 << 1) #define CORE_IMP0_PRT_ID 0x0804 #define CORE_BRCM_HDR_CTRL 0x0080c #define BRCM_HDR_EN_P8 (1 << 0) #define BRCM_HDR_EN_P5 (1 << 1) #define BRCM_HDR_EN_P7 (1 << 2) #define CORE_RST_MIB_CNT_EN 0x0950 #define CORE_BRCM_HDR_RX_DIS 0x0980 #define CORE_BRCM_HDR_TX_DIS 0x0988 #define CORE_ARLA_VTBL_RWCTRL 0x1600 #define ARLA_VTBL_CMD_WRITE 0 #define ARLA_VTBL_CMD_READ 1 #define ARLA_VTBL_CMD_CLEAR 2 #define ARLA_VTBL_STDN (1 << 7) #define CORE_ARLA_VTBL_ADDR 0x1604 #define VTBL_ADDR_INDEX_MASK 0xfff #define CORE_ARLA_VTBL_ENTRY 0x160c #define FWD_MAP_MASK 0x1ff #define UNTAG_MAP_MASK 0x1ff #define UNTAG_MAP_SHIFT 9 #define MSTP_INDEX_MASK 0x7 #define MSTP_INDEX_SHIFT 18 #define FWD_MODE (1 << 21) #define CORE_MEM_PSM_VDD_CTRL 0x2380 #define P_TXQ_PSM_VDD_SHIFT 2 #define P_TXQ_PSM_VDD_MASK 0x3 #define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \ ((x) * P_TXQ_PSM_VDD_SHIFT)) #define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8)) #define PORT_VLAN_CTRL_MASK 0x1ff #define CORE_DEFAULT_1Q_TAG_P(x) (0xd040 + ((x) * 8)) #define CFI_SHIFT 12 #define PRI_SHIFT 13 #define PRI_MASK 0x7 #define CORE_JOIN_ALL_VLAN_EN 0xd140 #define CORE_EEE_EN_CTRL 0x24800 #define CORE_EEE_LPI_INDICATE 0x24810 #endif /* __BCM_SF2_REGS_H */ |