config [31mCONFIG_STMMAC_ETH[0m
tristate "STMicroelectronics 10/100/1000 Ethernet driver"
depends on [31mCONFIG_HAS_IOMEM[0m && [31mCONFIG_HAS_DMA[0m
select [31mCONFIG_MII[0m
select [31mCONFIG_PHYLIB[0m
select [31mCONFIG_CRC32[0m
imply [31mCONFIG_PTP_1588_CLOCK[0m
select [31mCONFIG_RESET_CONTROLLER[0m
---help---
This is the driver for the Ethernet IPs are built around a
Synopsys IP Core and only tested on the STMicroelectronics
platforms.
if [31mCONFIG_STMMAC_ETH[0m
config [31mCONFIG_STMMAC_PLATFORM[0m
tristate "STMMAC Platform bus support"
depends on [31mCONFIG_STMMAC_ETH[0m
select [31mCONFIG_MFD_SYSCON[0m
default y
---help---
This selects the platform specific bus support for the stmmac driver.
This is the driver used on several SoCs:
STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
If you have a controller with this interface, say Y or [31mCONFIG_M[0m here.
If unsure, say N.
if [31mCONFIG_STMMAC_PLATFORM[0m
config [31mCONFIG_DWMAC_GENERIC[0m
tristate "Generic driver for DWMAC"
default [31mCONFIG_STMMAC_PLATFORM[0m
---help---
Generic DWMAC driver for platforms that don't require any
platform specific code to function or is using platform
data for setup.
config [31mCONFIG_DWMAC_IPQ806X[0m
tristate "QCA IPQ806x DWMAC support"
default [31mCONFIG_ARCH_QCOM[0m
depends on [31mCONFIG_OF[0m && ([31mCONFIG_ARCH_QCOM[0m || [31mCONFIG_COMPILE_TEST[0m)
select [31mCONFIG_MFD_SYSCON[0m
help
Support for QCA IPQ806X DWMAC Ethernet.
This selects the IPQ806x SoC glue layer support for the stmmac
device driver. This driver does not use any of the hardware
acceleration features available on this SoC. Network devices
will behave like standard non-accelerated ethernet interfaces.
config [31mCONFIG_DWMAC_LPC18XX[0m
tristate "NXP LPC18xx/43xx DWMAC support"
default [31mCONFIG_ARCH_LPC18XX[0m
depends on [31mCONFIG_OF[0m && ([31mCONFIG_ARCH_LPC18XX[0m || [31mCONFIG_COMPILE_TEST[0m)
select [31mCONFIG_MFD_SYSCON[0m
---help---
Support for NXP LPC18xx/43xx DWMAC Ethernet.
config [31mCONFIG_DWMAC_MESON[0m
tristate "Amlogic Meson dwmac support"
default [31mCONFIG_ARCH_MESON[0m
depends on [31mCONFIG_OF[0m && [31mCONFIG_COMMON_CLK[0m && ([31mCONFIG_ARCH_MESON[0m || [31mCONFIG_COMPILE_TEST[0m)
help
Support for Ethernet controller on Amlogic Meson SoCs.
This selects the Amlogic Meson SoC glue layer support for
the stmmac device driver. This driver is used for Meson6,
Meson8, Meson8b and GXBB SoCs.
config [31mCONFIG_DWMAC_OXNAS[0m
tristate "Oxford Semiconductor OXNAS dwmac support"
default [31mCONFIG_ARCH_OXNAS[0m
depends on [31mCONFIG_OF[0m && [31mCONFIG_COMMON_CLK[0m && ([31mCONFIG_ARCH_OXNAS[0m || [31mCONFIG_COMPILE_TEST[0m)
select [31mCONFIG_MFD_SYSCON[0m
help
Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs.
This selects the Oxford Semiconductor OXNASSoC glue layer support for
the stmmac device driver. This driver is used for OX820.
config [31mCONFIG_DWMAC_ROCKCHIP[0m
tristate "Rockchip dwmac support"
default [31mCONFIG_ARCH_ROCKCHIP[0m
depends on [31mCONFIG_OF[0m && ([31mCONFIG_ARCH_ROCKCHIP[0m || [31mCONFIG_COMPILE_TEST[0m)
select [31mCONFIG_MFD_SYSCON[0m
help
Support for Ethernet controller on Rockchip RK3288 SoC.
This selects the Rockchip RK3288 SoC glue layer support for
the stmmac device driver.
config [31mCONFIG_DWMAC_SOCFPGA[0m
tristate "SOCFPGA dwmac support"
default [31mCONFIG_ARCH_SOCFPGA[0m
depends on [31mCONFIG_OF[0m && ([31mCONFIG_ARCH_SOCFPGA[0m || [31mCONFIG_COMPILE_TEST[0m)
select [31mCONFIG_MFD_SYSCON[0m
help
Support for ethernet controller on Altera SOCFPGA
This selects the Altera SOCFPGA SoC glue layer support
for the stmmac device driver. This driver is used for
arria5 and cyclone5 [31mCONFIG_FPGA[0m SoCs.
config [31mCONFIG_DWMAC_STI[0m
tristate "STi GMAC support"
default [31mCONFIG_ARCH_STI[0m
depends on [31mCONFIG_OF[0m && ([31mCONFIG_ARCH_STI[0m || [31mCONFIG_COMPILE_TEST[0m)
select [31mCONFIG_MFD_SYSCON[0m
---help---
Support for ethernet controller on STi SOCs.
This selects STi SoC glue layer support for the stmmac
device driver. This driver is used on for the STi series
SOCs GMAC ethernet controller.
config [31mCONFIG_DWMAC_STM32[0m
tristate "STM32 DWMAC support"
default [31mCONFIG_ARCH_STM32[0m
depends on [31mCONFIG_OF[0m && [31mCONFIG_HAS_IOMEM[0m && ([31mCONFIG_ARCH_STM32[0m || [31mCONFIG_COMPILE_TEST[0m)
select [31mCONFIG_MFD_SYSCON[0m
---help---
Support for ethernet controller on STM32 SOCs.
This selects STM32 SoC glue layer support for the stmmac
device driver. This driver is used on for the STM32 series
SOCs GMAC ethernet controller.
config [31mCONFIG_DWMAC_SUNXI[0m
tristate "Allwinner GMAC support"
default [31mCONFIG_ARCH_SUNXI[0m
depends on [31mCONFIG_OF[0m && ([31mCONFIG_ARCH_SUNXI[0m || [31mCONFIG_COMPILE_TEST[0m)
---help---
Support for Allwinner A20/A31 GMAC ethernet controllers.
This selects Allwinner SoC glue layer support for the
stmmac device driver. This driver is used for A20/A31
GMAC ethernet controller.
endif
config [31mCONFIG_STMMAC_PCI[0m
tristate "STMMAC PCI bus support"
depends on [31mCONFIG_STMMAC_ETH[0m && [31mCONFIG_PCI[0m
---help---
This is to select the Synopsys DWMAC available on [31mCONFIG_PCI[0m devices,
if you have a controller with this interface, say Y or [31mCONFIG_M[0m here.
This [31mCONFIG_PCI[0m support is tested on XLINX XC2V3000 FF1152AMT0221
D1215994A VIRTEX [31mCONFIG_FPGA[0m board.
If unsure, say N.
endif