#
# Architectures that offer an [31mCONFIG_FUNCTION_TRACER[0m implementation should
# select [31mCONFIG_HAVE_FUNCTION_TRACER[0m:
#
config [31mCONFIG_USER_STACKTRACE_SUPPORT[0m
bool
config [31mCONFIG_NOP_TRACER[0m
bool
config [31mCONFIG_HAVE_FTRACE_NMI_ENTER[0m
bool
help
See Documentation/trace/ftrace-design.txt
config [31mCONFIG_HAVE_FUNCTION_TRACER[0m
bool
help
See Documentation/trace/ftrace-design.txt
config [31mCONFIG_HAVE_FUNCTION_GRAPH_TRACER[0m
bool
help
See Documentation/trace/ftrace-design.txt
config [31mCONFIG_HAVE_DYNAMIC_FTRACE[0m
bool
help
See Documentation/trace/ftrace-design.txt
config [31mCONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS[0m
bool
config [31mCONFIG_HAVE_FTRACE_MCOUNT_RECORD[0m
bool
help
See Documentation/trace/ftrace-design.txt
config [31mCONFIG_HAVE_SYSCALL_TRACEPOINTS[0m
bool
help
See Documentation/trace/ftrace-design.txt
config [31mCONFIG_HAVE_FENTRY[0m
bool
help
Arch supports the gcc options -pg with -mfentry
config [31mCONFIG_HAVE_C_RECORDMCOUNT[0m
bool
help
[31mCONFIG_C[0m version of recordmcount available?
config [31mCONFIG_TRACER_MAX_TRACE[0m
bool
config [31mCONFIG_TRACE_CLOCK[0m
bool
config [31mCONFIG_RING_BUFFER[0m
bool
select [31mCONFIG_TRACE_CLOCK[0m
select [31mCONFIG_IRQ_WORK[0m
config [31mCONFIG_FTRACE_NMI_ENTER[0m
bool
depends on [31mCONFIG_HAVE_FTRACE_NMI_ENTER[0m
default y
config [31mCONFIG_EVENT_TRACING[0m
select [31mCONFIG_CONTEXT_SWITCH_TRACER[0m
select [31mCONFIG_GLOB[0m
bool
config [31mCONFIG_CONTEXT_SWITCH_TRACER[0m
bool
config [31mCONFIG_RING_BUFFER_ALLOW_SWAP[0m
bool
help
Allow the use of ring_buffer_swap_cpu.
Adds a very slight overhead to tracing when enabled.
# All tracer options should select [31mCONFIG_GENERIC_TRACER[0m. For those options that are
# enabled by all tracers (context switch and event tracer) they select [31mCONFIG_TRACING[0m.
# This allows those options to appear when no other tracer is selected. But the
# options do not appear when something else selects it. We need the two options
# [31mCONFIG_GENERIC_TRACER[0m and [31mCONFIG_TRACING[0m to avoid circular dependencies to accomplish the
# hiding of the automatic options.
config [31mCONFIG_TRACING[0m
bool
select [31mCONFIG_DEBUG_FS[0m
select [31mCONFIG_RING_BUFFER[0m
select [31mCONFIG_STACKTRACE[0m if [31mCONFIG_STACKTRACE_SUPPORT[0m
select [31mCONFIG_TRACEPOINTS[0m
select [31mCONFIG_NOP_TRACER[0m
select [31mCONFIG_BINARY_PRINTF[0m
select [31mCONFIG_EVENT_TRACING[0m
select [31mCONFIG_TRACE_CLOCK[0m
config [31mCONFIG_GENERIC_TRACER[0m
bool
select [31mCONFIG_TRACING[0m
#
# Minimum requirements an architecture has to meet for us to
# be able to offer generic tracing facilities:
#
config [31mCONFIG_TRACING_SUPPORT[0m
bool
# [31mCONFIG_PPC32[0m has no irqflags tracing support, but it can use most of the
# tracers anyway, they were tested to build and work. Note that new
# exceptions to this list aren't welcomed, better implement the
# irqflags tracing for your architecture.
depends on [31mCONFIG_TRACE_IRQFLAGS_SUPPORT[0m || [31mCONFIG_PPC32[0m
depends on [31mCONFIG_STACKTRACE_SUPPORT[0m
default y
if [31mCONFIG_TRACING_SUPPORT[0m
menuconfig [31mCONFIG_FTRACE[0m
bool "Tracers"
default y if [31mCONFIG_DEBUG_KERNEL[0m
help
Enable the kernel tracing infrastructure.
if [31mCONFIG_FTRACE[0m
config [31mCONFIG_FUNCTION_TRACER[0m
bool "Kernel Function Tracer"
depends on [31mCONFIG_HAVE_FUNCTION_TRACER[0m
select [31mCONFIG_KALLSYMS[0m
select [31mCONFIG_GENERIC_TRACER[0m
select [31mCONFIG_CONTEXT_SWITCH_TRACER[0m
select [31mCONFIG_GLOB[0m
help
Enable the kernel to trace every kernel function. This is done
by using a compiler feature to insert a small, 5-byte No-Operation
instruction at the beginning of every kernel function, which NOP
sequence is then dynamically patched into a tracer call when
tracing is enabled by the administrator. If it's runtime disabled
(the bootup default), then the overhead of the instructions is very
small and not measurable even in micro-benchmarks.
config [31mCONFIG_FUNCTION_GRAPH_TRACER[0m
bool "Kernel Function Graph Tracer"
depends on [31mCONFIG_HAVE_FUNCTION_GRAPH_TRACER[0m
depends on [31mCONFIG_FUNCTION_TRACER[0m
depends on ![31mCONFIG_X86_32[0m || ![31mCONFIG_CC_OPTIMIZE_FOR_SIZE[0m
default y
help
Enable the kernel to trace a function at both its return
and its entry.
Its first purpose is to trace the duration of functions and
draw a call graph for each thread with some information like
the return value. This is done by setting the current return
address on the current task structure into a stack of calls.
config [31mCONFIG_IRQSOFF_TRACER[0m
bool "Interrupts-off Latency Tracer"
default n
depends on [31mCONFIG_TRACE_IRQFLAGS_SUPPORT[0m
depends on ![31mCONFIG_ARCH_USES_GETTIMEOFFSET[0m
select [31mCONFIG_TRACE_IRQFLAGS[0m
select [31mCONFIG_GENERIC_TRACER[0m
select [31mCONFIG_TRACER_MAX_TRACE[0m
select [31mCONFIG_RING_BUFFER_ALLOW_SWAP[0m
select [31mCONFIG_TRACER_SNAPSHOT[0m
select [31mCONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP[0m
help
This option measures the time spent in irqs-off critical
sections, with microsecond accuracy.
The default measurement method is a maximum search, which is
disabled by default and can be runtime (re-)started
via:
echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
(Note that kernel size and overhead increase with this option
enabled. This option and the preempt-off timing option can be
used together or separately.)
config [31mCONFIG_PREEMPT_TRACER[0m
bool "Preemption-off Latency Tracer"
default n
depends on ![31mCONFIG_ARCH_USES_GETTIMEOFFSET[0m
depends on [31mCONFIG_PREEMPT[0m
select [31mCONFIG_GENERIC_TRACER[0m
select [31mCONFIG_TRACER_MAX_TRACE[0m
select [31mCONFIG_RING_BUFFER_ALLOW_SWAP[0m
select [31mCONFIG_TRACER_SNAPSHOT[0m
select [31mCONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP[0m
help
This option measures the time spent in preemption-off critical
sections, with microsecond accuracy.
The default measurement method is a maximum search, which is
disabled by default and can be runtime (re-)started
via:
echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
(Note that kernel size and overhead increase with this option
enabled. This option and the irqs-off timing option can be
used together or separately.)
config [31mCONFIG_SCHED_TRACER[0m
bool "Scheduling Latency Tracer"
select [31mCONFIG_GENERIC_TRACER[0m
select [31mCONFIG_CONTEXT_SWITCH_TRACER[0m
select [31mCONFIG_TRACER_MAX_TRACE[0m
select [31mCONFIG_TRACER_SNAPSHOT[0m
help
This tracer tracks the latency of the highest priority task
to be scheduled in, starting from the point it has woken up.
config [31mCONFIG_HWLAT_TRACER[0m
bool "Tracer to detect hardware latencies (like SMIs)"
select [31mCONFIG_GENERIC_TRACER[0m
help
This tracer, when enabled will create one or more kernel threads,
depening on what the cpumask file is set to, which each thread
spinning in a loop looking for interruptions caused by
something other than the kernel. For example, if a
System Management Interrupt (SMI) takes a noticeable amount of
time, this tracer will detect it. This is useful for testing
if a system is reliable for Real Time tasks.
Some files are created in the tracing directory when this
is enabled:
hwlat_detector/width - time in usecs for how long to spin for
hwlat_detector/window - time in usecs between the start of each
iteration
[31mCONFIG_A[0m kernel thread is created that will spin with interrupts disabled
for "width" microseconds in every "widow" cycle. It will not spin
for "window - width" microseconds, where the system can
continue to operate.
The output will appear in the trace and trace_pipe files.
When the tracer is not running, it has no affect on the system,
but when it is running, it can cause the system to be
periodically non responsive. Do not run this tracer on a
production system.
To enable this tracer, echo in "hwlat" into the current_tracer
file. Every time a latency is greater than tracing_thresh, it will
be recorded into the ring buffer.
config [31mCONFIG_ENABLE_DEFAULT_TRACERS[0m
bool "Trace process context switches and events"
depends on ![31mCONFIG_GENERIC_TRACER[0m
select [31mCONFIG_TRACING[0m
help
This tracer hooks to various trace points in the kernel,
allowing the user to pick and choose which trace point they
want to trace. It also includes the sched_switch tracer plugin.
config [31mCONFIG_FTRACE_SYSCALLS[0m
bool "Trace syscalls"
depends on [31mCONFIG_HAVE_SYSCALL_TRACEPOINTS[0m
select [31mCONFIG_GENERIC_TRACER[0m
select [31mCONFIG_KALLSYMS[0m
help
Basic tracer to catch the syscall entry and exit events.
config [31mCONFIG_TRACER_SNAPSHOT[0m
bool "Create a snapshot trace buffer"
select [31mCONFIG_TRACER_MAX_TRACE[0m
help
Allow tracing users to take snapshot of the current buffer using the
ftrace interface, e.g.:
echo 1 > /sys/kernel/debug/tracing/snapshot
cat snapshot
config [31mCONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP[0m
bool "Allow snapshot to swap per CPU"
depends on [31mCONFIG_TRACER_SNAPSHOT[0m
select [31mCONFIG_RING_BUFFER_ALLOW_SWAP[0m
help
Allow doing a snapshot of a single CPU buffer instead of a
full swap (all buffers). If this is set, then the following is
allowed:
echo 1 > /sys/kernel/debug/tracing/per_cpu/cpu2/snapshot
After which, only the tracing buffer for CPU 2 was swapped with
the main tracing buffer, and the other CPU buffers remain the same.
When this is enabled, this adds a little more overhead to the
trace recording, as it needs to add some checks to synchronize
recording with swaps. But this does not affect the performance
of the overall system. This is enabled by default when the preempt
or irq latency tracers are enabled, as those need to swap as well
and already adds the overhead (plus a lot more).
config [31mCONFIG_TRACE_BRANCH_PROFILING[0m
bool
select [31mCONFIG_GENERIC_TRACER[0m
choice
prompt "Branch Profiling"
default [31mCONFIG_BRANCH_PROFILE_NONE[0m
help
The branch profiling is a software profiler. It will add hooks
into the [31mCONFIG_C[0m conditionals to test which path a branch takes.
The likely/unlikely profiler only looks at the conditions that
are annotated with a likely or unlikely macro.
The "all branch" profiler will profile every if-statement in the
kernel. This profiler will also enable the likely/unlikely
profiler.
Either of the above profilers adds a bit of overhead to the system.
If unsure, choose "No branch profiling".
config [31mCONFIG_BRANCH_PROFILE_NONE[0m
bool "No branch profiling"
help
No branch profiling. Branch profiling adds a bit of overhead.
Only enable it if you want to analyse the branching behavior.
Otherwise keep it disabled.
config [31mCONFIG_PROFILE_ANNOTATED_BRANCHES[0m
bool "Trace likely/unlikely profiler"
select [31mCONFIG_TRACE_BRANCH_PROFILING[0m
help
This tracer profiles all likely and unlikely macros
in the kernel. It will display the results in:
/sys/kernel/debug/tracing/trace_stat/branch_annotated
Note: this will add a significant overhead; only turn this
on if you need to profile the system's use of these macros.
config [31mCONFIG_PROFILE_ALL_BRANCHES[0m
bool "Profile all if conditionals"
select [31mCONFIG_TRACE_BRANCH_PROFILING[0m
help
This tracer profiles all branch conditions. Every if ()
taken in the kernel is recorded whether it hit or miss.
The results will be displayed in:
/sys/kernel/debug/tracing/trace_stat/branch_all
This option also enables the likely/unlikely profiler.
This configuration, when enabled, will impose a great overhead
on the system. This should only be enabled when the system
is to be analyzed in much detail.
endchoice
config [31mCONFIG_TRACING_BRANCHES[0m
bool
help
Selected by tracers that will trace the likely and unlikely
conditions. This prevents the tracers themselves from being
profiled. Profiling the tracing infrastructure can only happen
when the likelys and unlikelys are not being traced.
config [31mCONFIG_BRANCH_TRACER[0m
bool "Trace likely/unlikely instances"
depends on [31mCONFIG_TRACE_BRANCH_PROFILING[0m
select [31mCONFIG_TRACING_BRANCHES[0m
help
This traces the events of likely and unlikely condition
calls in the kernel. The difference between this and the
"Trace likely/unlikely profiler" is that this is not a
histogram of the callers, but actually places the calling
events into a running trace buffer to see when and where the
events happened, as well as their results.
Say N if unsure.
config [31mCONFIG_STACK_TRACER[0m
bool "Trace max stack"
depends on [31mCONFIG_HAVE_FUNCTION_TRACER[0m
select [31mCONFIG_FUNCTION_TRACER[0m
select [31mCONFIG_STACKTRACE[0m
select [31mCONFIG_KALLSYMS[0m
help
This special tracer records the maximum stack footprint of the
kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
This tracer works by hooking into every function call that the
kernel executes, and keeping a maximum stack depth value and
stack-trace saved. If this is configured with [31mCONFIG_DYNAMIC_FTRACE[0m
then it will not have any overhead while the stack tracer
is disabled.
To enable the stack tracer on bootup, pass in 'stacktrace'
on the kernel command line.
The stack tracer can also be enabled or disabled via the
sysctl kernel.stack_tracer_enabled
Say N if unsure.
config [31mCONFIG_BLK_DEV_IO_TRACE[0m
bool "Support for tracing block IO actions"
depends on [31mCONFIG_SYSFS[0m
depends on [31mCONFIG_BLOCK[0m
select [31mCONFIG_RELAY[0m
select [31mCONFIG_DEBUG_FS[0m
select [31mCONFIG_TRACEPOINTS[0m
select [31mCONFIG_GENERIC_TRACER[0m
select [31mCONFIG_STACKTRACE[0m
help
Say Y here if you want to be able to trace the block layer actions
on a given queue. Tracing allows you to see any traffic happening
on a block device queue. For more information (and the userspace
support tools needed), fetch the blktrace tools from:
git://git.kernel.dk/blktrace.git
Tracing also is possible using the ftrace interface, e.g.:
echo 1 > /sys/block/sda/sda1/trace/enable
echo blk > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/trace_pipe
If unsure, say N.
config [31mCONFIG_KPROBE_EVENT[0m
depends on [31mCONFIG_KPROBES[0m
depends on [31mCONFIG_HAVE_REGS_AND_STACK_ACCESS_API[0m
bool "Enable kprobes-based dynamic events"
select [31mCONFIG_TRACING[0m
select [31mCONFIG_PROBE_EVENTS[0m
default y
help
This allows the user to add tracing events (similar to tracepoints)
on the fly via the ftrace interface. See
Documentation/trace/kprobetrace.txt for more details.
Those events can be inserted wherever kprobes can probe, and record
various register and memory values.
This option is also required by perf-probe subcommand of perf tools.
If you want to use perf tools, this option is strongly recommended.
config [31mCONFIG_UPROBE_EVENT[0m
bool "Enable uprobes-based dynamic events"
depends on [31mCONFIG_ARCH_SUPPORTS_UPROBES[0m
depends on [31mCONFIG_MMU[0m
depends on [31mCONFIG_PERF_EVENTS[0m
select [31mCONFIG_UPROBES[0m
select [31mCONFIG_PROBE_EVENTS[0m
select [31mCONFIG_TRACING[0m
default n
help
This allows the user to add tracing events on top of userspace
dynamic events (similar to tracepoints) on the fly via the trace
events interface. Those events can be inserted wherever uprobes
can probe, and record various registers.
This option is required if you plan to use perf-probe subcommand
of perf tools on user space applications.
config [31mCONFIG_BPF_EVENTS[0m
depends on [31mCONFIG_BPF_SYSCALL[0m
depends on ([31mCONFIG_KPROBE_EVENT[0m || [31mCONFIG_UPROBE_EVENT[0m) && [31mCONFIG_PERF_EVENTS[0m
bool
default y
help
This allows the user to attach [31mCONFIG_BPF[0m programs to kprobe events.
config [31mCONFIG_PROBE_EVENTS[0m
def_bool n
config [31mCONFIG_DYNAMIC_FTRACE[0m
bool "enable/disable function tracing dynamically"
depends on [31mCONFIG_FUNCTION_TRACER[0m
depends on [31mCONFIG_HAVE_DYNAMIC_FTRACE[0m
default y
help
This option will modify all the calls to function tracing
dynamically (will patch them out of the binary image and
replace them with a No-Op instruction) on boot up. During
compile time, a table is made of all the locations that ftrace
can function trace, and this table is linked into the kernel
image. When this is enabled, functions can be individually
enabled, and the functions not enabled will not affect
performance of the system.
See the files in /sys/kernel/debug/tracing:
available_filter_functions
set_ftrace_filter
set_ftrace_notrace
This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
otherwise has native performance as long as no tracing is active.
config [31mCONFIG_DYNAMIC_FTRACE_WITH_REGS[0m
def_bool y
depends on [31mCONFIG_DYNAMIC_FTRACE[0m
depends on [31mCONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS[0m
config [31mCONFIG_FUNCTION_PROFILER[0m
bool "Kernel function profiler"
depends on [31mCONFIG_FUNCTION_TRACER[0m
default n
help
This option enables the kernel function profiler. [31mCONFIG_A[0m file is created
in debugfs called function_profile_enabled which defaults to zero.
When a 1 is echoed into this file profiling begins, and when a
zero is entered, profiling stops. [31mCONFIG_A[0m "functions" file is created in
the trace_stats directory; this file shows the list of functions that
have been hit and their counters.
If in doubt, say N.
config [31mCONFIG_FTRACE_MCOUNT_RECORD[0m
def_bool y
depends on [31mCONFIG_DYNAMIC_FTRACE[0m
depends on [31mCONFIG_HAVE_FTRACE_MCOUNT_RECORD[0m
config [31mCONFIG_FTRACE_SELFTEST[0m
bool
config [31mCONFIG_FTRACE_STARTUP_TEST[0m
bool "Perform a startup test on ftrace"
depends on [31mCONFIG_GENERIC_TRACER[0m
select [31mCONFIG_FTRACE_SELFTEST[0m
help
This option performs a series of startup tests on ftrace. On bootup
a series of tests are made to verify that the tracer is
functioning properly. It will do tests on all the configured
tracers of ftrace.
config [31mCONFIG_EVENT_TRACE_TEST_SYSCALLS[0m
bool "Run selftest on syscall events"
depends on [31mCONFIG_FTRACE_STARTUP_TEST[0m
help
This option will also enable testing every syscall event.
It only enables the event and disables it and runs various loads
with the event enabled. This adds a bit more time for kernel boot
up since it runs this on every system call defined.
TBD - enable a way to actually call the syscalls as we test their
events
config [31mCONFIG_MMIOTRACE[0m
bool "Memory mapped IO tracing"
depends on [31mCONFIG_HAVE_MMIOTRACE_SUPPORT[0m && [31mCONFIG_PCI[0m
select [31mCONFIG_GENERIC_TRACER[0m
help
Mmiotrace traces Memory Mapped I/O access and is meant for
debugging and reverse engineering. It is called from the ioremap
implementation and works via page faults. Tracing is disabled by
default and can be enabled at run-time.
See Documentation/trace/mmiotrace.txt.
If you are not helping to develop drivers, say N.
config [31mCONFIG_TRACING_MAP[0m
bool
depends on [31mCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG[0m
help
tracing_map is a special-purpose lock-free map for tracing,
separated out as a stand-alone facility in order to allow it
to be shared between multiple tracers. It isn't meant to be
generally used outside of that context, and is normally
selected by tracers that use it.
config [31mCONFIG_HIST_TRIGGERS[0m
bool "Histogram triggers"
depends on [31mCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG[0m
select [31mCONFIG_TRACING_MAP[0m
select [31mCONFIG_TRACING[0m
default n
help
Hist triggers allow one or more arbitrary trace event fields
to be aggregated into hash tables and dumped to stdout by
reading a debugfs/tracefs file. They're useful for
gathering quick and dirty (though precise) summaries of
event activity as an initial guide for further investigation
using more advanced tools.
See Documentation/trace/events.txt.
If in doubt, say N.
config [31mCONFIG_MMIOTRACE_TEST[0m
tristate "Test module for mmiotrace"
depends on [31mCONFIG_MMIOTRACE[0m && m
help
This is a dumb module for testing mmiotrace. It is very dangerous
as it will write garbage to IO memory starting at a given address.
However, it should be safe to use on e.g. unused portion of VRAM.
Say N, unless you absolutely know what you are doing.
config [31mCONFIG_TRACEPOINT_BENCHMARK[0m
bool "Add tracepoint that benchmarks tracepoints"
help
This option creates the tracepoint "benchmark:benchmark_event".
When the tracepoint is enabled, it kicks off a kernel thread that
goes into an infinite loop (calling cond_sched() to let other tasks
run), and calls the tracepoint. Each iteration will record the time
it took to write to the tracepoint and the next iteration that
data will be passed to the tracepoint itself. That is, the tracepoint
will report the time it took to do the previous tracepoint.
The string written to the tracepoint is a static string of 128 bytes
to keep the time the same. The initial string is simply a write of
"START". The second string records the cold cache time of the first
write which is not added to the rest of the calculations.
As it is a tight loop, it benchmarks as hot cache. That's fine because
we care most about hot paths that are probably in cache already.
An example of the output:
START
first=3672 [COLD CACHED]
last=632 first=3672 max=632 min=632 avg=316 std=446 std^2=199712
last=278 first=3672 max=632 min=278 avg=303 std=316 std^2=100337
last=277 first=3672 max=632 min=277 avg=296 std=258 std^2=67064
last=273 first=3672 max=632 min=273 avg=292 std=224 std^2=50411
last=273 first=3672 max=632 min=273 avg=288 std=200 std^2=40389
last=281 first=3672 max=632 min=273 avg=287 std=183 std^2=33666
config [31mCONFIG_RING_BUFFER_BENCHMARK[0m
tristate "Ring buffer benchmark stress tester"
depends on [31mCONFIG_RING_BUFFER[0m
help
This option creates a test to stress the ring buffer and benchmark it.
It creates its own ring buffer such that it will not interfere with
any other users of the ring buffer (such as ftrace). It then creates
a producer and consumer that will run for 10 seconds and sleep for
10 seconds. Each interval it will print out the number of events
it recorded and give a rough estimate of how long each iteration took.
It does not disable interrupts or raise its priority, so it may be
affected by processes that are running.
If unsure, say N.
config [31mCONFIG_RING_BUFFER_STARTUP_TEST[0m
bool "Ring buffer startup self test"
depends on [31mCONFIG_RING_BUFFER[0m
help
Run a simple self test on the ring buffer on boot up. Late in the
kernel boot sequence, the test will start that kicks off
a thread per cpu. Each thread will write various size events
into the ring buffer. Another thread is created to send IPIs
to each of the threads, where the IPI handler will also write
to the ring buffer, to test/stress the nesting ability.
If any anomalies are discovered, a warning will be displayed
and all ring buffers will be disabled.
The test runs for 10 seconds. This will slow your boot time
by at least 10 more seconds.
At the end of the test, statics and more checks are done.
It will output the stats of each per cpu buffer. What
was written, the sizes, what was read, what was lost, and
other similar details.
If unsure, say N
config [31mCONFIG_TRACE_ENUM_MAP_FILE[0m
bool "Show enum mappings for trace events"
depends on [31mCONFIG_TRACING[0m
help
The "print fmt" of the trace events will show the enum names instead
of their values. This can cause problems for user space tools that
use this string to parse the raw data as user space does not know
how to convert the string to its value.
To fix this, there's a special macro in the kernel that can be used
to convert the enum into its value. If this macro is used, then the
print fmt strings will have the enums converted to their values.
If something does not get converted properly, this option can be
used to show what enums the kernel tried to convert.
This option is for debugging the enum conversions. [31mCONFIG_A[0m file is created
in the tracing directory called "enum_map" that will show the enum
names matched with their values and what trace event system they
belong too.
Normally, the mapping of the strings to values will be freed after
boot up or module load. With this option, they will not be freed, as
they are needed for the "enum_map" file. Enabling this option will
increase the memory footprint of the running kernel.
If unsure, say N
config [31mCONFIG_TRACING_EVENTS_GPIO[0m
bool "Trace gpio events"
depends on [31mCONFIG_GPIOLIB[0m
default y
help
Enable tracing events for gpio subsystem
endif # [31mCONFIG_FTRACE[0m
endif # [31mCONFIG_TRACING_SUPPORT[0m