Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
/*
 * Mars MR97310A library
 *
 * The original mr97310a driver, which supported the Aiptek Pencam VGA+, is
 * Copyright (C) 2009 Kyle Guinn <elyk03@gmail.com>
 *
 * Support for the MR97310A cameras in addition to the Aiptek Pencam VGA+
 * and for the routines for detecting and classifying these various cameras,
 * is Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu>
 *
 * Support for the control settings for the CIF cameras is
 * Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com> and
 * Thomas Kaiser <thomas@kaiser-linux.li>
 *
 * Support for the control settings for the VGA cameras is
 * Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu>
 *
 * Several previously unsupported cameras are owned and have been tested by
 * Hans de Goede <hdegoede@redhat.com> and
 * Thomas Kaiser <thomas@kaiser-linux.li> and
 * Theodore Kilgore <kilgota@auburn.edu> and
 * Edmond Rodriguez <erodrig_97@yahoo.com> and
 * Aurelien Jacobs <aurel@gnuage.org>
 *
 * The MR97311A support in gspca/mars.c has been helpful in understanding some
 * of the registers in these cameras.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#define MODULE_NAME "mr97310a"

#include "gspca.h"

#define CAM_TYPE_CIF			0
#define CAM_TYPE_VGA			1

#define MR97310A_BRIGHTNESS_DEFAULT	0

#define MR97310A_EXPOSURE_MIN		0
#define MR97310A_EXPOSURE_MAX		4095
#define MR97310A_EXPOSURE_DEFAULT	1000

#define MR97310A_GAIN_MIN		0
#define MR97310A_GAIN_MAX		31
#define MR97310A_GAIN_DEFAULT		25

#define MR97310A_CONTRAST_MIN		0
#define MR97310A_CONTRAST_MAX		31
#define MR97310A_CONTRAST_DEFAULT	23

#define MR97310A_CS_GAIN_MIN		0
#define MR97310A_CS_GAIN_MAX		0x7ff
#define MR97310A_CS_GAIN_DEFAULT	0x110

#define MR97310A_CID_CLOCKDIV (V4L2_CTRL_CLASS_USER + 0x1000)
#define MR97310A_MIN_CLOCKDIV_MIN	3
#define MR97310A_MIN_CLOCKDIV_MAX	8
#define MR97310A_MIN_CLOCKDIV_DEFAULT	3

MODULE_AUTHOR("Kyle Guinn <elyk03@gmail.com>,Theodore Kilgore <kilgota@auburn.edu>");
MODULE_DESCRIPTION("GSPCA/Mars-Semi MR97310A USB Camera Driver");
MODULE_LICENSE("GPL");

/* global parameters */
static int force_sensor_type = -1;
module_param(force_sensor_type, int, 0644);
MODULE_PARM_DESC(force_sensor_type, "Force sensor type (-1 (auto), 0 or 1)");

/* specific webcam descriptor */
struct sd {
	struct gspca_dev gspca_dev;  /* !! must be the first item */
	struct { /* exposure/min_clockdiv control cluster */
		struct v4l2_ctrl *exposure;
		struct v4l2_ctrl *min_clockdiv;
	};
	u8 sof_read;
	u8 cam_type;	/* 0 is CIF and 1 is VGA */
	u8 sensor_type;	/* We use 0 and 1 here, too. */
	u8 do_lcd_stop;
	u8 adj_colors;
};

struct sensor_w_data {
	u8 reg;
	u8 flags;
	u8 data[16];
	int len;
};

static void sd_stopN(struct gspca_dev *gspca_dev);

static const struct v4l2_pix_format vga_mode[] = {
	{160, 120, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE,
		.bytesperline = 160,
		.sizeimage = 160 * 120,
		.colorspace = V4L2_COLORSPACE_SRGB,
		.priv = 4},
	{176, 144, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE,
		.bytesperline = 176,
		.sizeimage = 176 * 144,
		.colorspace = V4L2_COLORSPACE_SRGB,
		.priv = 3},
	{320, 240, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE,
		.bytesperline = 320,
		.sizeimage = 320 * 240,
		.colorspace = V4L2_COLORSPACE_SRGB,
		.priv = 2},
	{352, 288, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE,
		.bytesperline = 352,
		.sizeimage = 352 * 288,
		.colorspace = V4L2_COLORSPACE_SRGB,
		.priv = 1},
	{640, 480, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE,
		.bytesperline = 640,
		.sizeimage = 640 * 480,
		.colorspace = V4L2_COLORSPACE_SRGB,
		.priv = 0},
};

/* the bytes to write are in gspca_dev->usb_buf */
static int mr_write(struct gspca_dev *gspca_dev, int len)
{
	int rc;

	rc = usb_bulk_msg(gspca_dev->dev,
			  usb_sndbulkpipe(gspca_dev->dev, 4),
			  gspca_dev->usb_buf, len, NULL, 500);
	if (rc < 0)
		pr_err("reg write [%02x] error %d\n",
		       gspca_dev->usb_buf[0], rc);
	return rc;
}

/* the bytes are read into gspca_dev->usb_buf */
static int mr_read(struct gspca_dev *gspca_dev, int len)
{
	int rc;

	rc = usb_bulk_msg(gspca_dev->dev,
			  usb_rcvbulkpipe(gspca_dev->dev, 3),
			  gspca_dev->usb_buf, len, NULL, 500);
	if (rc < 0)
		pr_err("reg read [%02x] error %d\n",
		       gspca_dev->usb_buf[0], rc);
	return rc;
}

static int sensor_write_reg(struct gspca_dev *gspca_dev, u8 reg, u8 flags,
	const u8 *data, int len)
{
	gspca_dev->usb_buf[0] = 0x1f;
	gspca_dev->usb_buf[1] = flags;
	gspca_dev->usb_buf[2] = reg;
	memcpy(gspca_dev->usb_buf + 3, data, len);

	return mr_write(gspca_dev, len + 3);
}

static int sensor_write_regs(struct gspca_dev *gspca_dev,
	const struct sensor_w_data *data, int len)
{
	int i, rc;

	for (i = 0; i < len; i++) {
		rc = sensor_write_reg(gspca_dev, data[i].reg, data[i].flags,
					  data[i].data, data[i].len);
		if (rc < 0)
			return rc;
	}

	return 0;
}

static int sensor_write1(struct gspca_dev *gspca_dev, u8 reg, u8 data)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 buf, confirm_reg;
	int rc;

	buf = data;
	if (sd->cam_type == CAM_TYPE_CIF) {
		rc = sensor_write_reg(gspca_dev, reg, 0x01, &buf, 1);
		confirm_reg = sd->sensor_type ? 0x13 : 0x11;
	} else {
		rc = sensor_write_reg(gspca_dev, reg, 0x00, &buf, 1);
		confirm_reg = 0x11;
	}
	if (rc < 0)
		return rc;

	buf = 0x01;
	rc = sensor_write_reg(gspca_dev, confirm_reg, 0x00, &buf, 1);
	if (rc < 0)
		return rc;

	return 0;
}

static int cam_get_response16(struct gspca_dev *gspca_dev, u8 reg, int verbose)
{
	int err_code;

	gspca_dev->usb_buf[0] = reg;
	err_code = mr_write(gspca_dev, 1);
	if (err_code < 0)
		return err_code;

	err_code = mr_read(gspca_dev, 16);
	if (err_code < 0)
		return err_code;

	if (verbose)
		PDEBUG(D_PROBE, "Register: %02x reads %02x%02x%02x", reg,
		       gspca_dev->usb_buf[0],
		       gspca_dev->usb_buf[1],
		       gspca_dev->usb_buf[2]);

	return 0;
}

static int zero_the_pointer(struct gspca_dev *gspca_dev)
{
	__u8 *data = gspca_dev->usb_buf;
	int err_code;
	u8 status = 0;
	int tries = 0;

	err_code = cam_get_response16(gspca_dev, 0x21, 0);
	if (err_code < 0)
		return err_code;

	data[0] = 0x19;
	data[1] = 0x51;
	err_code = mr_write(gspca_dev, 2);
	if (err_code < 0)
		return err_code;

	err_code = cam_get_response16(gspca_dev, 0x21, 0);
	if (err_code < 0)
		return err_code;

	data[0] = 0x19;
	data[1] = 0xba;
	err_code = mr_write(gspca_dev, 2);
	if (err_code < 0)
		return err_code;

	err_code = cam_get_response16(gspca_dev, 0x21, 0);
	if (err_code < 0)
		return err_code;

	data[0] = 0x19;
	data[1] = 0x00;
	err_code = mr_write(gspca_dev, 2);
	if (err_code < 0)
		return err_code;

	err_code = cam_get_response16(gspca_dev, 0x21, 0);
	if (err_code < 0)
		return err_code;

	data[0] = 0x19;
	data[1] = 0x00;
	err_code = mr_write(gspca_dev, 2);
	if (err_code < 0)
		return err_code;

	while (status != 0x0a && tries < 256) {
		err_code = cam_get_response16(gspca_dev, 0x21, 0);
		status = data[0];
		tries++;
		if (err_code < 0)
			return err_code;
	}
	if (status != 0x0a)
		PERR("status is %02x", status);

	tries = 0;
	while (tries < 4) {
		data[0] = 0x19;
		data[1] = 0x00;
		err_code = mr_write(gspca_dev, 2);
		if (err_code < 0)
			return err_code;

		err_code = cam_get_response16(gspca_dev, 0x21, 0);
		status = data[0];
		tries++;
		if (err_code < 0)
			return err_code;
	}

	data[0] = 0x19;
	err_code = mr_write(gspca_dev, 1);
	if (err_code < 0)
		return err_code;

	err_code = mr_read(gspca_dev, 16);
	if (err_code < 0)
		return err_code;

	return 0;
}

static int stream_start(struct gspca_dev *gspca_dev)
{
	gspca_dev->usb_buf[0] = 0x01;
	gspca_dev->usb_buf[1] = 0x01;
	return mr_write(gspca_dev, 2);
}

static void stream_stop(struct gspca_dev *gspca_dev)
{
	gspca_dev->usb_buf[0] = 0x01;
	gspca_dev->usb_buf[1] = 0x00;
	if (mr_write(gspca_dev, 2) < 0)
		PERR("Stream Stop failed");
}

static void lcd_stop(struct gspca_dev *gspca_dev)
{
	gspca_dev->usb_buf[0] = 0x19;
	gspca_dev->usb_buf[1] = 0x54;
	if (mr_write(gspca_dev, 2) < 0)
		PERR("LCD Stop failed");
}

static int isoc_enable(struct gspca_dev *gspca_dev)
{
	gspca_dev->usb_buf[0] = 0x00;
	gspca_dev->usb_buf[1] = 0x4d;  /* ISOC transferring enable... */
	return mr_write(gspca_dev, 2);
}

/* This function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
		     const struct usb_device_id *id)
{
	struct sd *sd = (struct sd *) gspca_dev;
	struct cam *cam;
	int err_code;

	cam = &gspca_dev->cam;
	cam->cam_mode = vga_mode;
	cam->nmodes = ARRAY_SIZE(vga_mode);
	sd->do_lcd_stop = 0;

	/* Several of the supported CIF cameras share the same USB ID but
	 * require different initializations and different control settings.
	 * The same is true of the VGA cameras. Therefore, we are forced
	 * to start the initialization process in order to determine which
	 * camera is present. Some of the supported cameras require the
	 * memory pointer to be set to 0 as the very first item of business
	 * or else they will not stream. So we do that immediately.
	 */
	err_code = zero_the_pointer(gspca_dev);
	if (err_code < 0)
		return err_code;

	err_code = stream_start(gspca_dev);
	if (err_code < 0)
		return err_code;

	/* Now, the query for sensor type. */
	err_code = cam_get_response16(gspca_dev, 0x07, 1);
	if (err_code < 0)
		return err_code;

	if (id->idProduct == 0x0110 || id->idProduct == 0x010e) {
		sd->cam_type = CAM_TYPE_CIF;
		cam->nmodes--;
		/*
		 * All but one of the known CIF cameras share the same USB ID,
		 * but two different init routines are in use, and the control
		 * settings are different, too. We need to detect which camera
		 * of the two known varieties is connected!
		 *
		 * A list of known CIF cameras follows. They all report either
		 * 0200 for type 0 or 0300 for type 1.
		 * If you have another to report, please do
		 *
		 * Name		sd->sensor_type		reported by
		 *
		 * Sakar 56379 Spy-shot	0		T. Kilgore
		 * Innovage		0		T. Kilgore
		 * Vivitar Mini		0		H. De Goede
		 * Vivitar Mini		0		E. Rodriguez
		 * Vivitar Mini		1		T. Kilgore
		 * Elta-Media 8212dc	1		T. Kaiser
		 * Philips dig. keych.	1		T. Kilgore
		 * Trust Spyc@m 100	1		A. Jacobs
		 */
		switch (gspca_dev->usb_buf[0]) {
		case 2:
			sd->sensor_type = 0;
			break;
		case 3:
			sd->sensor_type = 1;
			break;
		default:
			pr_err("Unknown CIF Sensor id : %02x\n",
			       gspca_dev->usb_buf[1]);
			return -ENODEV;
		}
		PDEBUG(D_PROBE, "MR97310A CIF camera detected, sensor: %d",
		       sd->sensor_type);
	} else {
		sd->cam_type = CAM_TYPE_VGA;

		/*
		 * Here is a table of the responses to the query for sensor
		 * type, from the known MR97310A VGA cameras. Six different
		 * cameras of which five share the same USB ID.
		 *
		 * Name			gspca_dev->usb_buf[]	sd->sensor_type
		 *				sd->do_lcd_stop
		 * Aiptek Pencam VGA+	0300		0		1
		 * ION digital		0300		0		1
		 * Argus DC-1620	0450		1		0
		 * Argus QuickClix	0420		1		1
		 * Sakar 77379 Digital	0350		0		1
		 * Sakar 1638x CyberPix	0120		0		2
		 *
		 * Based upon these results, we assume default settings
		 * and then correct as necessary, as follows.
		 *
		 */

		sd->sensor_type = 1;
		sd->do_lcd_stop = 0;
		sd->adj_colors = 0;
		if (gspca_dev->usb_buf[0] == 0x01) {
			sd->sensor_type = 2;
		} else if ((gspca_dev->usb_buf[0] != 0x03) &&
					(gspca_dev->usb_buf[0] != 0x04)) {
			pr_err("Unknown VGA Sensor id Byte 0: %02x\n",
			       gspca_dev->usb_buf[0]);
			pr_err("Defaults assumed, may not work\n");
			pr_err("Please report this\n");
		}
		/* Sakar Digital color needs to be adjusted. */
		if ((gspca_dev->usb_buf[0] == 0x03) &&
					(gspca_dev->usb_buf[1] == 0x50))
			sd->adj_colors = 1;
		if (gspca_dev->usb_buf[0] == 0x04) {
			sd->do_lcd_stop = 1;
			switch (gspca_dev->usb_buf[1]) {
			case 0x50:
				sd->sensor_type = 0;
				PDEBUG(D_PROBE, "sensor_type corrected to 0");
				break;
			case 0x20:
				/* Nothing to do here. */
				break;
			default:
				pr_err("Unknown VGA Sensor id Byte 1: %02x\n",
				       gspca_dev->usb_buf[1]);
				pr_err("Defaults assumed, may not work\n");
				pr_err("Please report this\n");
			}
		}
		PDEBUG(D_PROBE, "MR97310A VGA camera detected, sensor: %d",
		       sd->sensor_type);
	}
	/* Stop streaming as we've started it only to probe the sensor type. */
	sd_stopN(gspca_dev);

	if (force_sensor_type != -1) {
		sd->sensor_type = !!force_sensor_type;
		PDEBUG(D_PROBE, "Forcing sensor type to: %d",
		       sd->sensor_type);
	}

	return 0;
}

/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
	return 0;
}

static int start_cif_cam(struct gspca_dev *gspca_dev)
{
	struct sd *sd = (struct sd *) gspca_dev;
	__u8 *data = gspca_dev->usb_buf;
	int err_code;
	static const __u8 startup_string[] = {
		0x00,
		0x0d,
		0x01,
		0x00, /* Hsize/8 for 352 or 320 */
		0x00, /* Vsize/4 for 288 or 240 */
		0x13, /* or 0xbb, depends on sensor */
		0x00, /* Hstart, depends on res. */
		0x00, /* reserved ? */
		0x00, /* Vstart, depends on res. and sensor */
		0x50, /* 0x54 to get 176 or 160 */
		0xc0
	};

	/* Note: Some of the above descriptions guessed from MR97113A driver */

	memcpy(data, startup_string, 11);
	if (sd->sensor_type)
		data[5] = 0xbb;

	switch (gspca_dev->pixfmt.width) {
	case 160:
		data[9] |= 0x04;  /* reg 8, 2:1 scale down from 320 */
		/* fall thru */
	case 320:
	default:
		data[3] = 0x28;			   /* reg 2, H size/8 */
		data[4] = 0x3c;			   /* reg 3, V size/4 */
		data[6] = 0x14;			   /* reg 5, H start  */
		data[8] = 0x1a + sd->sensor_type;  /* reg 7, V start  */
		break;
	case 176:
		data[9] |= 0x04;  /* reg 8, 2:1 scale down from 352 */
		/* fall thru */
	case 352:
		data[3] = 0x2c;			   /* reg 2, H size/8 */
		data[4] = 0x48;			   /* reg 3, V size/4 */
		data[6] = 0x06;			   /* reg 5, H start  */
		data[8] = 0x06 - sd->sensor_type;  /* reg 7, V start  */
		break;
	}
	err_code = mr_write(gspca_dev, 11);
	if (err_code < 0)
		return err_code;

	if (!sd->sensor_type) {
		static const struct sensor_w_data cif_sensor0_init_data[] = {
			{0x02, 0x00, {0x03, 0x5a, 0xb5, 0x01,
				      0x0f, 0x14, 0x0f, 0x10}, 8},
			{0x0c, 0x00, {0x04, 0x01, 0x01, 0x00, 0x1f}, 5},
			{0x12, 0x00, {0x07}, 1},
			{0x1f, 0x00, {0x06}, 1},
			{0x27, 0x00, {0x04}, 1},
			{0x29, 0x00, {0x0c}, 1},
			{0x40, 0x00, {0x40, 0x00, 0x04}, 3},
			{0x50, 0x00, {0x60}, 1},
			{0x60, 0x00, {0x06}, 1},
			{0x6b, 0x00, {0x85, 0x85, 0xc8, 0xc8, 0xc8, 0xc8}, 6},
			{0x72, 0x00, {0x1e, 0x56}, 2},
			{0x75, 0x00, {0x58, 0x40, 0xa2, 0x02, 0x31, 0x02,
				      0x31, 0x80, 0x00}, 9},
			{0x11, 0x00, {0x01}, 1},
			{0, 0, {0}, 0}
		};
		err_code = sensor_write_regs(gspca_dev, cif_sensor0_init_data,
					 ARRAY_SIZE(cif_sensor0_init_data));
	} else {	/* sd->sensor_type = 1 */
		static const struct sensor_w_data cif_sensor1_init_data[] = {
			/* Reg 3,4, 7,8 get set by the controls */
			{0x02, 0x00, {0x10}, 1},
			{0x05, 0x01, {0x22}, 1}, /* 5/6 also seen as 65h/32h */
			{0x06, 0x01, {0x00}, 1},
			{0x09, 0x02, {0x0e}, 1},
			{0x0a, 0x02, {0x05}, 1},
			{0x0b, 0x02, {0x05}, 1},
			{0x0c, 0x02, {0x0f}, 1},
			{0x0d, 0x02, {0x07}, 1},
			{0x0e, 0x02, {0x0c}, 1},
			{0x0f, 0x00, {0x00}, 1},
			{0x10, 0x00, {0x06}, 1},
			{0x11, 0x00, {0x07}, 1},
			{0x12, 0x00, {0x00}, 1},
			{0x13, 0x00, {0x01}, 1},
			{0, 0, {0}, 0}
		};
		/* Without this command the cam won't work with USB-UHCI */
		gspca_dev->usb_buf[0] = 0x0a;
		gspca_dev->usb_buf[1] = 0x00;
		err_code = mr_write(gspca_dev, 2);
		if (err_code < 0)
			return err_code;
		err_code = sensor_write_regs(gspca_dev, cif_sensor1_init_data,
					 ARRAY_SIZE(cif_sensor1_init_data));
	}
	return err_code;
}

static int start_vga_cam(struct gspca_dev *gspca_dev)
{
	struct sd *sd = (struct sd *) gspca_dev;
	__u8 *data = gspca_dev->usb_buf;
	int err_code;
	static const __u8 startup_string[] =
		{0x00, 0x0d, 0x01, 0x00, 0x00, 0x2b, 0x00, 0x00,
		 0x00, 0x50, 0xc0};
	/* What some of these mean is explained in start_cif_cam(), above */

	memcpy(data, startup_string, 11);
	if (!sd->sensor_type) {
		data[5]  = 0x00;
		data[10] = 0x91;
	}
	if (sd->sensor_type == 2) {
		data[5]  = 0x00;
		data[10] = 0x18;
	}

	switch (gspca_dev->pixfmt.width) {
	case 160:
		data[9] |= 0x0c;  /* reg 8, 4:1 scale down */
		/* fall thru */
	case 320:
		data[9] |= 0x04;  /* reg 8, 2:1 scale down */
		/* fall thru */
	case 640:
	default:
		data[3] = 0x50;  /* reg 2, H size/8 */
		data[4] = 0x78;  /* reg 3, V size/4 */
		data[6] = 0x04;  /* reg 5, H start */
		data[8] = 0x03;  /* reg 7, V start */
		if (sd->sensor_type == 2) {
			data[6] = 2;
			data[8] = 1;
		}
		if (sd->do_lcd_stop)
			data[8] = 0x04;  /* Bayer tile shifted */
		break;

	case 176:
		data[9] |= 0x04;  /* reg 8, 2:1 scale down */
		/* fall thru */
	case 352:
		data[3] = 0x2c;  /* reg 2, H size */
		data[4] = 0x48;  /* reg 3, V size */
		data[6] = 0x94;  /* reg 5, H start */
		data[8] = 0x63;  /* reg 7, V start */
		if (sd->do_lcd_stop)
			data[8] = 0x64;  /* Bayer tile shifted */
		break;
	}

	err_code = mr_write(gspca_dev, 11);
	if (err_code < 0)
		return err_code;

	if (!sd->sensor_type) {
		static const struct sensor_w_data vga_sensor0_init_data[] = {
			{0x01, 0x00, {0x0c, 0x00, 0x04}, 3},
			{0x14, 0x00, {0x01, 0xe4, 0x02, 0x84}, 4},
			{0x20, 0x00, {0x00, 0x80, 0x00, 0x08}, 4},
			{0x25, 0x00, {0x03, 0xa9, 0x80}, 3},
			{0x30, 0x00, {0x30, 0x18, 0x10, 0x18}, 4},
			{0, 0, {0}, 0}
		};
		err_code = sensor_write_regs(gspca_dev, vga_sensor0_init_data,
					 ARRAY_SIZE(vga_sensor0_init_data));
	} else if (sd->sensor_type == 1) {
		static const struct sensor_w_data color_adj[] = {
			{0x02, 0x00, {0x06, 0x59, 0x0c, 0x16, 0x00,
				/* adjusted blue, green, red gain correct
				   too much blue from the Sakar Digital */
				0x05, 0x01, 0x04}, 8}
		};

		static const struct sensor_w_data color_no_adj[] = {
			{0x02, 0x00, {0x06, 0x59, 0x0c, 0x16, 0x00,
				/* default blue, green, red gain settings */
				0x07, 0x00, 0x01}, 8}
		};

		static const struct sensor_w_data vga_sensor1_init_data[] = {
			{0x11, 0x04, {0x01}, 1},
			{0x0a, 0x00, {0x00, 0x01, 0x00, 0x00, 0x01,
			/* These settings may be better for some cameras */
			/* {0x0a, 0x00, {0x01, 0x06, 0x00, 0x00, 0x01, */
				0x00, 0x0a}, 7},
			{0x11, 0x04, {0x01}, 1},
			{0x12, 0x00, {0x00, 0x63, 0x00, 0x70, 0x00, 0x00}, 6},
			{0x11, 0x04, {0x01}, 1},
			{0, 0, {0}, 0}
		};

		if (sd->adj_colors)
			err_code = sensor_write_regs(gspca_dev, color_adj,
					 ARRAY_SIZE(color_adj));
		else
			err_code = sensor_write_regs(gspca_dev, color_no_adj,
					 ARRAY_SIZE(color_no_adj));

		if (err_code < 0)
			return err_code;

		err_code = sensor_write_regs(gspca_dev, vga_sensor1_init_data,
					 ARRAY_SIZE(vga_sensor1_init_data));
	} else {	/* sensor type == 2 */
		static const struct sensor_w_data vga_sensor2_init_data[] = {

			{0x01, 0x00, {0x48}, 1},
			{0x02, 0x00, {0x22}, 1},
			/* Reg 3 msb and 4 is lsb of the exposure setting*/
			{0x05, 0x00, {0x10}, 1},
			{0x06, 0x00, {0x00}, 1},
			{0x07, 0x00, {0x00}, 1},
			{0x08, 0x00, {0x00}, 1},
			{0x09, 0x00, {0x00}, 1},
			/* The following are used in the gain control
			 * which is BTW completely borked in the OEM driver
			 * The values for each color go from 0 to 0x7ff
			 *{0x0a, 0x00, {0x01}, 1},  green1 gain msb
			 *{0x0b, 0x00, {0x10}, 1},  green1 gain lsb
			 *{0x0c, 0x00, {0x01}, 1},  red gain msb
			 *{0x0d, 0x00, {0x10}, 1},  red gain lsb
			 *{0x0e, 0x00, {0x01}, 1},  blue gain msb
			 *{0x0f, 0x00, {0x10}, 1},  blue gain lsb
			 *{0x10, 0x00, {0x01}, 1}, green2 gain msb
			 *{0x11, 0x00, {0x10}, 1}, green2 gain lsb
			 */
			{0x12, 0x00, {0x00}, 1},
			{0x13, 0x00, {0x04}, 1}, /* weird effect on colors */
			{0x14, 0x00, {0x00}, 1},
			{0x15, 0x00, {0x06}, 1},
			{0x16, 0x00, {0x01}, 1},
			{0x17, 0x00, {0xe2}, 1}, /* vertical alignment */
			{0x18, 0x00, {0x02}, 1},
			{0x19, 0x00, {0x82}, 1}, /* don't mess with */
			{0x1a, 0x00, {0x00}, 1},
			{0x1b, 0x00, {0x20}, 1},
			/* {0x1c, 0x00, {0x17}, 1}, contrast control */
			{0x1d, 0x00, {0x80}, 1}, /* moving causes a mess */
			{0x1e, 0x00, {0x08}, 1}, /* moving jams the camera */
			{0x1f, 0x00, {0x0c}, 1},
			{0x20, 0x00, {0x00}, 1},
			{0, 0, {0}, 0}
		};
		err_code = sensor_write_regs(gspca_dev, vga_sensor2_init_data,
					 ARRAY_SIZE(vga_sensor2_init_data));
	}
	return err_code;
}

static int sd_start(struct gspca_dev *gspca_dev)
{
	struct sd *sd = (struct sd *) gspca_dev;
	int err_code;

	sd->sof_read = 0;

	/* Some of the VGA cameras require the memory pointer
	 * to be set to 0 again. We have been forced to start the
	 * stream in sd_config() to detect the hardware, and closed it.
	 * Thus, we need here to do a completely fresh and clean start. */
	err_code = zero_the_pointer(gspca_dev);
	if (err_code < 0)
		return err_code;

	err_code = stream_start(gspca_dev);
	if (err_code < 0)
		return err_code;

	if (sd->cam_type == CAM_TYPE_CIF) {
		err_code = start_cif_cam(gspca_dev);
	} else {
		err_code = start_vga_cam(gspca_dev);
	}
	if (err_code < 0)
		return err_code;

	return isoc_enable(gspca_dev);
}

static void sd_stopN(struct gspca_dev *gspca_dev)
{
	struct sd *sd = (struct sd *) gspca_dev;

	stream_stop(gspca_dev);
	/* Not all the cams need this, but even if not, probably a good idea */
	zero_the_pointer(gspca_dev);
	if (sd->do_lcd_stop)
		lcd_stop(gspca_dev);
}

static void setbrightness(struct gspca_dev *gspca_dev, s32 val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 sign_reg = 7;  /* This reg and the next one used on CIF cams. */
	u8 value_reg = 8; /* VGA cams seem to use regs 0x0b and 0x0c */
	static const u8 quick_clix_table[] =
	/*	  0  1  2   3  4  5  6  7  8  9  10  11  12  13  14  15 */
		{ 0, 4, 8, 12, 1, 2, 3, 5, 6, 9,  7, 10, 13, 11, 14, 15};
	if (sd->cam_type == CAM_TYPE_VGA) {
		sign_reg += 4;
		value_reg += 4;
	}

	/* Note register 7 is also seen as 0x8x or 0xCx in some dumps */
	if (val > 0) {
		sensor_write1(gspca_dev, sign_reg, 0x00);
	} else {
		sensor_write1(gspca_dev, sign_reg, 0x01);
		val = 257 - val;
	}
	/* Use lookup table for funky Argus QuickClix brightness */
	if (sd->do_lcd_stop)
		val = quick_clix_table[val];

	sensor_write1(gspca_dev, value_reg, val);
}

static void setexposure(struct gspca_dev *gspca_dev, s32 expo, s32 min_clockdiv)
{
	struct sd *sd = (struct sd *) gspca_dev;
	int exposure = MR97310A_EXPOSURE_DEFAULT;
	u8 buf[2];

	if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) {
		/* This cam does not like exposure settings < 300,
		   so scale 0 - 4095 to 300 - 4095 */
		exposure = (expo * 9267) / 10000 + 300;
		sensor_write1(gspca_dev, 3, exposure >> 4);
		sensor_write1(gspca_dev, 4, exposure & 0x0f);
	} else if (sd->sensor_type == 2) {
		exposure = expo;
		exposure >>= 3;
		sensor_write1(gspca_dev, 3, exposure >> 8);
		sensor_write1(gspca_dev, 4, exposure & 0xff);
	} else {
		/* We have both a clock divider and an exposure register.
		   We first calculate the clock divider, as that determines
		   the maximum exposure and then we calculate the exposure
		   register setting (which goes from 0 - 511).

		   Note our 0 - 4095 exposure is mapped to 0 - 511
		   milliseconds exposure time */
		u8 clockdiv = (60 * expo + 7999) / 8000;

		/* Limit framerate to not exceed usb bandwidth */
		if (clockdiv < min_clockdiv && gspca_dev->pixfmt.width >= 320)
			clockdiv = min_clockdiv;
		else if (clockdiv < 2)
			clockdiv = 2;

		if (sd->cam_type == CAM_TYPE_VGA && clockdiv < 4)
			clockdiv = 4;

		/* Frame exposure time in ms = 1000 * clockdiv / 60 ->
		exposure = (sd->exposure / 8) * 511 / (1000 * clockdiv / 60) */
		exposure = (60 * 511 * expo) / (8000 * clockdiv);
		if (exposure > 511)
			exposure = 511;

		/* exposure register value is reversed! */
		exposure = 511 - exposure;

		buf[0] = exposure & 0xff;
		buf[1] = exposure >> 8;
		sensor_write_reg(gspca_dev, 0x0e, 0, buf, 2);
		sensor_write1(gspca_dev, 0x02, clockdiv);
	}
}

static void setgain(struct gspca_dev *gspca_dev, s32 val)
{
	struct sd *sd = (struct sd *) gspca_dev;
	u8 gainreg;

	if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1)
		sensor_write1(gspca_dev, 0x0e, val);
	else if (sd->cam_type == CAM_TYPE_VGA && sd->sensor_type == 2)
		for (gainreg = 0x0a; gainreg < 0x11; gainreg += 2) {
			sensor_write1(gspca_dev, gainreg, val >> 8);
			sensor_write1(gspca_dev, gainreg + 1, val & 0xff);
		}
	else
		sensor_write1(gspca_dev, 0x10, val);
}

static void setcontrast(struct gspca_dev *gspca_dev, s32 val)
{
	sensor_write1(gspca_dev, 0x1c, val);
}

static int sd_s_ctrl(struct v4l2_ctrl *ctrl)
{
	struct gspca_dev *gspca_dev =
		container_of(ctrl->handler, struct gspca_dev, ctrl_handler);
	struct sd *sd = (struct sd *)gspca_dev;

	gspca_dev->usb_err = 0;

	if (!gspca_dev->streaming)
		return 0;

	switch (ctrl->id) {
	case V4L2_CID_BRIGHTNESS:
		setbrightness(gspca_dev, ctrl->val);
		break;
	case V4L2_CID_CONTRAST:
		setcontrast(gspca_dev, ctrl->val);
		break;
	case V4L2_CID_EXPOSURE:
		setexposure(gspca_dev, sd->exposure->val,
			    sd->min_clockdiv ? sd->min_clockdiv->val : 0);
		break;
	case V4L2_CID_GAIN:
		setgain(gspca_dev, ctrl->val);
		break;
	}
	return gspca_dev->usb_err;
}

static const struct v4l2_ctrl_ops sd_ctrl_ops = {
	.s_ctrl = sd_s_ctrl,
};

static int sd_init_controls(struct gspca_dev *gspca_dev)
{
	struct sd *sd = (struct sd *)gspca_dev;
	struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler;
	static const struct v4l2_ctrl_config clockdiv = {
		.ops = &sd_ctrl_ops,
		.id = MR97310A_CID_CLOCKDIV,
		.type = V4L2_CTRL_TYPE_INTEGER,
		.name = "Minimum Clock Divider",
		.min = MR97310A_MIN_CLOCKDIV_MIN,
		.max = MR97310A_MIN_CLOCKDIV_MAX,
		.step = 1,
		.def = MR97310A_MIN_CLOCKDIV_DEFAULT,
	};
	bool has_brightness = false;
	bool has_argus_brightness = false;
	bool has_contrast = false;
	bool has_gain = false;
	bool has_cs_gain = false;
	bool has_exposure = false;
	bool has_clockdiv = false;

	gspca_dev->vdev.ctrl_handler = hdl;
	v4l2_ctrl_handler_init(hdl, 4);

	/* Setup controls depending on camera type */
	if (sd->cam_type == CAM_TYPE_CIF) {
		/* No brightness for sensor_type 0 */
		if (sd->sensor_type == 0)
			has_exposure = has_gain = has_clockdiv = true;
		else
			has_exposure = has_gain = has_brightness = true;
	} else {
		/* All controls need to be disabled if VGA sensor_type is 0 */
		if (sd->sensor_type == 0)
			; /* no controls! */
		else if (sd->sensor_type == 2)
			has_exposure = has_cs_gain = has_contrast = true;
		else if (sd->do_lcd_stop)
			has_exposure = has_gain = has_argus_brightness =
				has_clockdiv = true;
		else
			has_exposure = has_gain = has_brightness =
				has_clockdiv = true;
	}

	/* Separate brightness control description for Argus QuickClix as it has
	 * different limits from the other mr97310a cameras, and separate gain
	 * control for Sakar CyberPix camera. */
	/*
	 * This control is disabled for CIF type 1 and VGA type 0 cameras.
	 * It does not quite act linearly for the Argus QuickClix camera,
	 * but it does control brightness. The values are 0 - 15 only, and
	 * the table above makes them act consecutively.
	 */
	if (has_brightness)
		v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
			V4L2_CID_BRIGHTNESS, -254, 255, 1,
			MR97310A_BRIGHTNESS_DEFAULT);
	else if (has_argus_brightness)
		v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
			V4L2_CID_BRIGHTNESS, 0, 15, 1,
			MR97310A_BRIGHTNESS_DEFAULT);
	if (has_contrast)
		v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
			V4L2_CID_CONTRAST, MR97310A_CONTRAST_MIN,
			MR97310A_CONTRAST_MAX, 1, MR97310A_CONTRAST_DEFAULT);
	if (has_gain)
		v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
			V4L2_CID_GAIN, MR97310A_GAIN_MIN, MR97310A_GAIN_MAX,
			1, MR97310A_GAIN_DEFAULT);
	else if (has_cs_gain)
		v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_GAIN,
			MR97310A_CS_GAIN_MIN, MR97310A_CS_GAIN_MAX,
			1, MR97310A_CS_GAIN_DEFAULT);
	if (has_exposure)
		sd->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
			V4L2_CID_EXPOSURE, MR97310A_EXPOSURE_MIN,
			MR97310A_EXPOSURE_MAX, 1, MR97310A_EXPOSURE_DEFAULT);
	if (has_clockdiv)
		sd->min_clockdiv = v4l2_ctrl_new_custom(hdl, &clockdiv, NULL);

	if (hdl->error) {
		pr_err("Could not initialize controls\n");
		return hdl->error;
	}
	if (has_exposure && has_clockdiv)
		v4l2_ctrl_cluster(2, &sd->exposure);
	return 0;
}

/* Include pac common sof detection functions */
#include "pac_common.h"

static void sd_pkt_scan(struct gspca_dev *gspca_dev,
			u8 *data,		/* isoc packet */
			int len)		/* iso packet length */
{
	struct sd *sd = (struct sd *) gspca_dev;
	unsigned char *sof;

	sof = pac_find_sof(gspca_dev, &sd->sof_read, data, len);
	if (sof) {
		int n;

		/* finish decoding current frame */
		n = sof - data;
		if (n > sizeof pac_sof_marker)
			n -= sizeof pac_sof_marker;
		else
			n = 0;
		gspca_frame_add(gspca_dev, LAST_PACKET,
					data, n);
		/* Start next frame. */
		gspca_frame_add(gspca_dev, FIRST_PACKET,
			pac_sof_marker, sizeof pac_sof_marker);
		len -= sof - data;
		data = sof;
	}
	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}

/* sub-driver description */
static const struct sd_desc sd_desc = {
	.name = MODULE_NAME,
	.config = sd_config,
	.init = sd_init,
	.init_controls = sd_init_controls,
	.start = sd_start,
	.stopN = sd_stopN,
	.pkt_scan = sd_pkt_scan,
};

/* -- module initialisation -- */
static const struct usb_device_id device_table[] = {
	{USB_DEVICE(0x08ca, 0x0110)},	/* Trust Spyc@m 100 */
	{USB_DEVICE(0x08ca, 0x0111)},	/* Aiptek Pencam VGA+ */
	{USB_DEVICE(0x093a, 0x010f)},	/* All other known MR97310A VGA cams */
	{USB_DEVICE(0x093a, 0x010e)},	/* All known MR97310A CIF cams */
	{}
};
MODULE_DEVICE_TABLE(usb, device_table);

/* -- device connect -- */
static int sd_probe(struct usb_interface *intf,
		    const struct usb_device_id *id)
{
	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
			       THIS_MODULE);
}

static struct usb_driver sd_driver = {
	.name = MODULE_NAME,
	.id_table = device_table,
	.probe = sd_probe,
	.disconnect = gspca_disconnect,
#ifdef CONFIG_PM
	.suspend = gspca_suspend,
	.resume = gspca_resume,
	.reset_resume = gspca_resume,
#endif
};

module_usb_driver(sd_driver);