#
# [31mCONFIG_PCI[0m Hotplug support
#
menuconfig [31mCONFIG_HOTPLUG_PCI[0m
bool "Support for PCI Hotplug"
depends on [31mCONFIG_PCI[0m && [31mCONFIG_SYSFS[0m
---help---
Say Y here if you have a motherboard with a [31mCONFIG_PCI[0m Hotplug controller.
This allows you to add and remove [31mCONFIG_PCI[0m cards while the machine is
powered up and running.
When in doubt, say N.
if [31mCONFIG_HOTPLUG_PCI[0m
config [31mCONFIG_HOTPLUG_PCI_COMPAQ[0m
tristate "Compaq PCI Hotplug driver"
depends on [31mCONFIG_X86[0m && [31mCONFIG_PCI_BIOS[0m
help
Say Y here if you have a motherboard with a Compaq [31mCONFIG_PCI[0m Hotplug
controller.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cpqphp.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_COMPAQ_NVRAM[0m
bool "Save configuration into NVRAM on Compaq servers"
depends on [31mCONFIG_HOTPLUG_PCI_COMPAQ[0m
help
Say Y here if you have a Compaq server that has a [31mCONFIG_PCI[0m Hotplug
controller. This will allow the [31mCONFIG_PCI[0m Hotplug driver to store the [31mCONFIG_PCI[0m
system configuration options in [31mCONFIG_NVRAM[0m.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_IBM[0m
tristate "IBM PCI Hotplug driver"
depends on [31mCONFIG_X86_IO_APIC[0m && [31mCONFIG_X86[0m && [31mCONFIG_PCI_BIOS[0m
help
Say Y here if you have a motherboard with a IBM [31mCONFIG_PCI[0m Hotplug
controller.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ibmphp.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_ACPI[0m
bool "ACPI PCI Hotplug driver"
depends on [31mCONFIG_HOTPLUG_PCI[0m=y && ((![31mCONFIG_ACPI_DOCK[0m && [31mCONFIG_ACPI[0m) || ([31mCONFIG_ACPI_DOCK[0m))
help
Say Y here if you have a system that supports [31mCONFIG_PCI[0m Hotplug using
[31mCONFIG_ACPI[0m.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_ACPI_IBM[0m
tristate "ACPI PCI Hotplug driver IBM extensions"
depends on [31mCONFIG_HOTPLUG_PCI_ACPI[0m
help
Say Y here if you have an IBM system that supports [31mCONFIG_PCI[0m Hotplug using
[31mCONFIG_ACPI[0m.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called acpiphp_ibm.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_CPCI[0m
bool "CompactPCI Hotplug driver"
help
Say Y here if you have a CompactPCI system card with CompactPCI
hotswap support per the PICMG 2.1 specification.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_CPCI_ZT5550[0m
tristate "Ziatech ZT5550 CompactPCI Hotplug driver"
depends on [31mCONFIG_HOTPLUG_PCI_CPCI[0m && [31mCONFIG_X86[0m
help
Say Y here if you have an Performance Technologies (formerly Intel,
formerly just Ziatech) Ziatech ZT5550 CompactPCI system card.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cpcihp_zt5550.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_CPCI_GENERIC[0m
tristate "Generic port I/O CompactPCI Hotplug driver"
depends on [31mCONFIG_HOTPLUG_PCI_CPCI[0m && [31mCONFIG_X86[0m
help
Say Y here if you have a CompactPCI system card that exposes the #ENUM
hotswap signal as a bit in a system register that can be read through
standard port I/O.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cpcihp_generic.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_SHPC[0m
tristate "SHPC PCI Hotplug driver"
help
Say Y here if you have a motherboard with a SHPC [31mCONFIG_PCI[0m Hotplug
controller.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called shpchp.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_POWERNV[0m
tristate "PowerPC PowerNV PCI Hotplug driver"
depends on [31mCONFIG_PPC_POWERNV[0m && [31mCONFIG_EEH[0m
select [31mCONFIG_OF_DYNAMIC[0m
help
Say Y here if you run PowerPC PowerNV platform that supports
[31mCONFIG_PCI[0m Hotplug
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called pnv-php.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_RPA[0m
tristate "RPA PCI Hotplug driver"
depends on [31mCONFIG_PPC_PSERIES[0m && [31mCONFIG_EEH[0m
help
Say Y here if you have a RPA system that supports [31mCONFIG_PCI[0m Hotplug.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called rpaphp.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_RPA_DLPAR[0m
tristate "RPA Dynamic Logical Partitioning for I/O slots"
depends on [31mCONFIG_HOTPLUG_PCI_RPA[0m
help
Say Y here if your system supports Dynamic Logical Partitioning
for I/O slots.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called rpadlpar_io.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_SGI[0m
tristate "SGI PCI Hotplug Support"
depends on [31mCONFIG_IA64_SGI_SN2[0m || [31mCONFIG_IA64_GENERIC[0m
help
Say Y here if you want to use the SGI Altix Hotplug
Driver for [31mCONFIG_PCI[0m devices.
When in doubt, say N.
config [31mCONFIG_HOTPLUG_PCI_S390[0m
bool "System z PCI Hotplug Support"
depends on [31mCONFIG_S390[0m && [31mCONFIG_64BIT[0m
help
Say Y here if you want to use the System z [31mCONFIG_PCI[0m Hotplug
driver for [31mCONFIG_PCI[0m devices. Without this driver it is not
possible to access stand-by [31mCONFIG_PCI[0m functions nor to deconfigure
[31mCONFIG_PCI[0m functions.
When in doubt, say Y.
endif # [31mCONFIG_HOTPLUG_PCI[0m