config [31mCONFIG_COMEDI[0m
tristate "Data acquisition support (comedi)"
depends on m
---help---
Enable support for a wide range of data acquisition devices
for Linux.
if [31mCONFIG_COMEDI[0m
config [31mCONFIG_COMEDI_DEBUG[0m
bool "Comedi debugging"
---help---
This is an option for use by developers; most people should
say N here. This enables comedi core and driver debugging.
config [31mCONFIG_COMEDI_DEFAULT_BUF_SIZE_KB[0m
int "Comedi default initial asynchronous buffer size in KiB"
default "2048"
---help---
This is the default asynchronous buffer size which is used for
commands running in the background in kernel space. This
defaults to 2048 KiB of memory so that a 16 channel card
running at 10 kHz has of 2-4 seconds of buffer.
config [31mCONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB[0m
int "Comedi default maximum asynchronous buffer size in KiB"
default "20480"
---help---
This is the default maximum asynchronous buffer size which can
be requested by a userspace program without root privileges.
This is set to 20480 KiB so that a fast I/O card with 16
channels running at 100 kHz has 2-4 seconds of buffer.
menuconfig [31mCONFIG_COMEDI_MISC_DRIVERS[0m
bool "Comedi misc drivers"
---help---
Enable comedi misc drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about misc non-hardware comedi drivers.
if [31mCONFIG_COMEDI_MISC_DRIVERS[0m
config [31mCONFIG_COMEDI_BOND[0m
tristate "Comedi device bonding support"
select [31mCONFIG_COMEDI_KCOMEDILIB[0m
---help---
Enable support for a driver to 'bond' (merge) multiple subdevices
from multiple devices together as one.
Currently, it only handles digital I/O subdevices.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called comedi_bond.
config [31mCONFIG_COMEDI_TEST[0m
tristate "Fake waveform generator support"
---help---
Enable support for the fake waveform generator.
This driver is mainly for testing purposes, but can also be used to
generate sample waveforms on systems that don't have data acquisition
hardware.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called comedi_test.
config [31mCONFIG_COMEDI_PARPORT[0m
tristate "Parallel port support"
---help---
Enable support for the standard parallel port.
[31mCONFIG_A[0m cheap and easy way to get a few more digital I/O lines. Steal
additional parallel ports from old computers or your neighbors'
computers.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called comedi_parport.
config [31mCONFIG_COMEDI_SERIAL2002[0m
tristate "Driver for serial connected hardware"
---help---
Enable support for serial connected hardware
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called serial2002.
config [31mCONFIG_COMEDI_SSV_DNP[0m
tristate "SSV Embedded Systems DIL/Net-PC support"
depends on [31mCONFIG_X86_32[0m || [31mCONFIG_COMPILE_TEST[0m
---help---
Enable support for SSV Embedded Systems DIL/Net-PC
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ssv_dnp.
endif # [31mCONFIG_COMEDI_MISC_DRIVERS[0m
menuconfig [31mCONFIG_COMEDI_ISA_DRIVERS[0m
bool "Comedi ISA and PC/104 drivers"
---help---
Enable comedi [31mCONFIG_ISA[0m and PC/104 drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about [31mCONFIG_ISA[0m and PC/104 comedi drivers.
if [31mCONFIG_COMEDI_ISA_DRIVERS[0m
config [31mCONFIG_COMEDI_PCL711[0m
tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcl711.
config [31mCONFIG_COMEDI_PCL724[0m
tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for [31mCONFIG_ISA[0m and PC/104 based 8255 digital i/o boards. This
driver provides a legacy comedi driver wrapper for the generic 8255
support driver.
Supported boards include:
Advantech PCL-724 24 channels
Advantech PCL-722 144 (or 96) channels
Advantech PCL-731 48 channels
ADlink ACL-7122 144 (or 96) channels
ADlink ACL-7124 24 channels
ADlink PET-48DIO 48 channels
WinSystems PCM-IO48 48 channels (PC/104)
Diamond Systems ONYX-MM-[31mCONFIG_DIO[0m 48 channels (PC/104)
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcl724.
config [31mCONFIG_COMEDI_PCL726[0m
tristate "Advantech PCL-726 and compatible ISA card support"
---help---
Enable support for Advantech PCL-726 and compatible [31mCONFIG_ISA[0m cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcl726.
config [31mCONFIG_COMEDI_PCL730[0m
tristate "Simple Digital I/O board support (8-bit ports)"
---help---
Enable support for various simple [31mCONFIG_ISA[0m or PC/104 Digital I/O boards.
These boards all use 8-bit I/O ports.
Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out
ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out
ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out
Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out
Advantech PCL-725 iso - 8 in/8 out
ICP P8R8-[31mCONFIG_DIO[0m iso - 8 in/8 out
ADlink ACL-7225b iso - 16 in/16 out
ICP P16R16-[31mCONFIG_DIO[0m iso - 16 in/16 out
Advantech PCL-733 iso - 32 in
Advantech PCL-734 iso - 32 out
Diamond Systems OPMM-1616-XT iso - 16 in/16 out
Diamond Systems PEARL-MM-P iso - 16 out
Diamond Systems IR104-PBF iso - 20 in/20 out
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcl730.
config [31mCONFIG_COMEDI_PCL812[0m
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
select [31mCONFIG_COMEDI_ISADMA[0m if [31mCONFIG_ISA_DMA_API[0m
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Advantech PCL-812/PG, PCL-813/[31mCONFIG_B[0m, ADLink
ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS [31mCONFIG_A[0m-821PGH/PGL/PGL-NDA,
[31mCONFIG_A[0m-822PGH/PGL, [31mCONFIG_A[0m-823PGH/PGL, [31mCONFIG_A[0m-826PG and ICP DAS ISO-813 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcl812.
config [31mCONFIG_COMEDI_PCL816[0m
tristate "Advantech PCL-814 and PCL-816 ISA card support"
select [31mCONFIG_COMEDI_ISADMA[0m if [31mCONFIG_ISA_DMA_API[0m
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Advantech PCL-814 and PCL-816 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcl816.
config [31mCONFIG_COMEDI_PCL818[0m
tristate "Advantech PCL-718 and PCL-818 ISA card support"
select [31mCONFIG_COMEDI_ISADMA[0m if [31mCONFIG_ISA_DMA_API[0m
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Advantech PCL-818 [31mCONFIG_ISA[0m cards
PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcl818.
config [31mCONFIG_COMEDI_PCM3724[0m
tristate "Advantech PCM-3724 PC/104 card support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for Advantech PCM-3724 PC/104 cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcm3724.
config [31mCONFIG_COMEDI_AMPLC_DIO200_ISA[0m
tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
select [31mCONFIG_COMEDI_AMPLC_DIO200[0m
---help---
Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
PC272E [31mCONFIG_ISA[0m [31mCONFIG_DIO[0m boards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called amplc_dio200.
config [31mCONFIG_COMEDI_AMPLC_PC236_ISA[0m
tristate "Amplicon PC36AT DIO board support"
select [31mCONFIG_COMEDI_AMPLC_PC236[0m
---help---
Enable support for Amplicon PC36AT [31mCONFIG_ISA[0m [31mCONFIG_DIO[0m board.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called amplc_pc236.
config [31mCONFIG_COMEDI_AMPLC_PC263_ISA[0m
tristate "Amplicon PC263 relay board support"
---help---
Enable support for Amplicon PC263 [31mCONFIG_ISA[0m relay board. This board has
16 reed relay output channels.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called amplc_pc263.
config [31mCONFIG_COMEDI_RTI800[0m
tristate "Analog Devices RTI-800/815 ISA card support"
---help---
Enable support for Analog Devices RTI-800/815 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called rti800.
config [31mCONFIG_COMEDI_RTI802[0m
tristate "Analog Devices RTI-802 ISA card support"
---help---
Enable support for Analog Devices RTI-802 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called rti802.
config [31mCONFIG_COMEDI_DAC02[0m
tristate "Keithley Metrabyte DAC02 compatible ISA card support"
---help---
Enable support for Keithley Metrabyte DAC02 compatible [31mCONFIG_ISA[0m cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dac02.
config [31mCONFIG_COMEDI_DAS16M1[0m
tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for Measurement Computing CIO-DAS16/M1 [31mCONFIG_ISA[0m cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called das16m1.
config [31mCONFIG_COMEDI_DAS08_ISA[0m
tristate "DAS-08 compatible ISA and PC/104 card support"
select [31mCONFIG_COMEDI_DAS08[0m
---help---
Enable support for Keithley Metrabyte/ComputerBoards DAS08
and compatible [31mCONFIG_ISA[0m and PC/104 cards:
Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
DAS08/JR-16-AO, [31mCONFIG_PC104[0m-DAS08, DAS08/JR/16.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called das08_isa.
config [31mCONFIG_COMEDI_DAS16[0m
tristate "DAS-16 compatible ISA and PC/104 card support"
select [31mCONFIG_COMEDI_ISADMA[0m if [31mCONFIG_ISA_DMA_API[0m
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for Keithley Metrabyte/ComputerBoards DAS16
and compatible [31mCONFIG_ISA[0m and PC/104 cards:
Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
ComputerBoards/MeasurementComputing [31mCONFIG_PC104[0m-DAS16/JR/,
[31mCONFIG_PC104[0m-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
CIO-DAS1602/16, CIO-DAS16/330
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called das16.
config [31mCONFIG_COMEDI_DAS800[0m
tristate "DAS800 and compatible ISA card support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Keithley Metrabyte DAS800 and compatible [31mCONFIG_ISA[0m cards
Keithley Metrabyte DAS-800, DAS-801, DAS-802
Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
CIO-DAS802/16
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called das800.
config [31mCONFIG_COMEDI_DAS1800[0m
tristate "DAS1800 and compatible ISA card support"
select [31mCONFIG_COMEDI_ISADMA[0m if [31mCONFIG_ISA_DMA_API[0m
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for DAS1800 and compatible [31mCONFIG_ISA[0m cards
Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
DAS-1802AO
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called das1800.
config [31mCONFIG_COMEDI_DAS6402[0m
tristate "DAS6402 and compatible ISA card support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for DAS6402 and compatible [31mCONFIG_ISA[0m cards
Computerboards, Keithley Metrabyte DAS6402 and compatibles
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called das6402.
config [31mCONFIG_COMEDI_DT2801[0m
tristate "Data Translation DT2801 ISA card support"
---help---
Enable support for Data Translation DT2801 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dt2801.
config [31mCONFIG_COMEDI_DT2811[0m
tristate "Data Translation DT2811 ISA card support"
---help---
Enable support for Data Translation DT2811 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dt2811.
config [31mCONFIG_COMEDI_DT2814[0m
tristate "Data Translation DT2814 ISA card support"
---help---
Enable support for Data Translation DT2814 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dt2814.
config [31mCONFIG_COMEDI_DT2815[0m
tristate "Data Translation DT2815 ISA card support"
---help---
Enable support for Data Translation DT2815 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dt2815.
config [31mCONFIG_COMEDI_DT2817[0m
tristate "Data Translation DT2817 ISA card support"
---help---
Enable support for Data Translation DT2817 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dt2817.
config [31mCONFIG_COMEDI_DT282X[0m
tristate "Data Translation DT2821 series and DT-EZ ISA card support"
select [31mCONFIG_COMEDI_ISADMA[0m if [31mCONFIG_ISA_DMA_API[0m
---help---
Enable support for Data Translation DT2821 series including DT-EZ
DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-[31mCONFIG_G[0m-16SE, DT2821-[31mCONFIG_G[0m-8DI,
DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dt282x.
config [31mCONFIG_COMEDI_DMM32AT[0m
tristate "Diamond Systems MM-32-AT PC/104 board support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for Diamond Systems MM-32-AT PC/104 boards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dmm32at.
config [31mCONFIG_COMEDI_FL512[0m
tristate "FL512 ISA card support"
---help---
Enable support for FL512 [31mCONFIG_ISA[0m card
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called fl512.
config [31mCONFIG_COMEDI_AIO_AIO12_8[0m
tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called aio_aio12_8.
config [31mCONFIG_COMEDI_AIO_IIRO_16[0m
tristate "I/O Products PC/104 IIRO16 Board support"
---help---
Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
Input Board
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called aio_iiro_16.
config [31mCONFIG_COMEDI_II_PCI20KC[0m
tristate "Intelligent Instruments PCI-20001C carrier support"
depends on [31mCONFIG_HAS_IOMEM[0m
---help---
Enable support for Intelligent Instruments [31mCONFIG_PCI[0m-20001C carrier
[31mCONFIG_PCI[0m-20001, [31mCONFIG_PCI[0m-20006 and [31mCONFIG_PCI[0m-20341
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ii_pci20kc.
config [31mCONFIG_COMEDI_C6XDIGIO[0m
tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
---help---
Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
card
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called c6xdigio.
config [31mCONFIG_COMEDI_MPC624[0m
tristate "Micro/sys MPC-624 PC/104 board support"
---help---
Enable support for Micro/sys MPC-624 PC/104 board
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called mpc624.
config [31mCONFIG_COMEDI_ADQ12B[0m
tristate "MicroAxial ADQ12-B data acquisition and control card support"
---help---
Enable MicroAxial ADQ12-[31mCONFIG_B[0m daq and control card support.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adq12b.
config [31mCONFIG_COMEDI_NI_AT_A2150[0m
tristate "NI AT-A2150 ISA card support"
select [31mCONFIG_COMEDI_ISADMA[0m if [31mCONFIG_ISA_DMA_API[0m
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for National Instruments AT-A2150 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_at_a2150.
config [31mCONFIG_COMEDI_NI_AT_AO[0m
tristate "NI AT-AO-6/10 EISA card support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for National Instruments AT-AO-6/10 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_at_ao.
config [31mCONFIG_COMEDI_NI_ATMIO[0m
tristate "NI AT-MIO E series ISA-PNP card support"
select [31mCONFIG_COMEDI_8255[0m
select [31mCONFIG_COMEDI_NI_TIO[0m
---help---
Enable support for National Instruments AT-MIO [31mCONFIG_E[0m series cards
National Instruments AT-MIO-16E-1 (ni_atmio),
AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_atmio.
config [31mCONFIG_COMEDI_NI_ATMIO16D[0m
tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_atmio16d.
config [31mCONFIG_COMEDI_NI_LABPC_ISA[0m
tristate "NI Lab-PC and compatibles ISA support"
select [31mCONFIG_COMEDI_NI_LABPC[0m
select [31mCONFIG_COMEDI_NI_LABPC_ISADMA[0m if [31mCONFIG_ISA_DMA_API[0m
---help---
Enable support for National Instruments Lab-PC and compatibles
Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
Kernel-level [31mCONFIG_ISA[0m plug-and-play support for the lab-pc-1200 boards has
not yet been added to the driver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_labpc.
config [31mCONFIG_COMEDI_PCMAD[0m
tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
---help---
Enable support for Winsystems PCM-[31mCONFIG_A[0m/D12 and PCM-[31mCONFIG_A[0m/D16 PC/104 boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcmad.
config [31mCONFIG_COMEDI_PCMDA12[0m
tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
---help---
Enable support for Winsystems PCM-[31mCONFIG_D[0m/[31mCONFIG_A[0m-12 8-channel AO PC/104 boards.
Note that the board is not [31mCONFIG_ISA[0m-[31mCONFIG_PNP[0m capable and thus needs the I/O
port comedi_config parameter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcmda12.
config [31mCONFIG_COMEDI_PCMMIO[0m
tristate "Winsystems PCM-MIO PC/104 board support"
---help---
Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcmmio.
config [31mCONFIG_COMEDI_PCMUIO[0m
tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
---help---
Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcmuio.
config [31mCONFIG_COMEDI_MULTIQ3[0m
tristate "Quanser Consulting MultiQ-3 ISA card support"
---help---
Enable support for Quanser Consulting MultiQ-3 [31mCONFIG_ISA[0m cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called multiq3.
config [31mCONFIG_COMEDI_S526[0m
tristate "Sensoray s526 support"
---help---
Enable support for Sensoray s526
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called s526.
endif # [31mCONFIG_COMEDI_ISA_DRIVERS[0m
menuconfig [31mCONFIG_COMEDI_PCI_DRIVERS[0m
tristate "Comedi PCI drivers"
depends on [31mCONFIG_PCI[0m
---help---
Enable support for comedi [31mCONFIG_PCI[0m drivers.
To compile this support as a module, choose [31mCONFIG_M[0m here: the module will
be called comedi_pci.
if [31mCONFIG_COMEDI_PCI_DRIVERS[0m
config [31mCONFIG_COMEDI_8255_PCI[0m
tristate "Generic PCI based 8255 digital i/o board support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for [31mCONFIG_PCI[0m based 8255 digital i/o boards. This driver
provides a [31mCONFIG_PCI[0m wrapper around the generic 8255 driver.
Supported boards:
ADlink - [31mCONFIG_PCI[0m-7224, [31mCONFIG_PCI[0m-7248, and [31mCONFIG_PCI[0m-7296
Measurement Computing - [31mCONFIG_PCI[0m-DIO24, [31mCONFIG_PCI[0m-DIO24H, [31mCONFIG_PCI[0m-DIO48H and
[31mCONFIG_PCI[0m-DIO96H
National Instruments - [31mCONFIG_PCI[0m-[31mCONFIG_DIO[0m-96, [31mCONFIG_PCI[0m-[31mCONFIG_DIO[0m-96B, PXI-6508, [31mCONFIG_PCI[0m-6503,
[31mCONFIG_PCI[0m-6503B, [31mCONFIG_PCI[0m-6503X, and PXI-6503
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will
be called 8255_pci.
config [31mCONFIG_COMEDI_ADDI_WATCHDOG[0m
tristate
---help---
Provides support for the watchdog subdevice found on many ADDI-DATA
boards. This module will be automatically selected when needed. The
module will be called addi_watchdog.
config [31mCONFIG_COMEDI_ADDI_APCI_1032[0m
tristate "ADDI-DATA APCI_1032 support"
---help---
Enable support for ADDI-DATA APCI_1032 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_1032.
config [31mCONFIG_COMEDI_ADDI_APCI_1500[0m
tristate "ADDI-DATA APCI_1500 support"
---help---
Enable support for ADDI-DATA APCI_1500 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_1500.
config [31mCONFIG_COMEDI_ADDI_APCI_1516[0m
tristate "ADDI-DATA APCI-1016/1516/2016 support"
select [31mCONFIG_COMEDI_ADDI_WATCHDOG[0m
---help---
Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
These are 16 channel, optically isolated, digital I/O boards. The 1516
and 2016 boards also have a watchdog for resetting the outputs to "0".
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_1516.
config [31mCONFIG_COMEDI_ADDI_APCI_1564[0m
tristate "ADDI-DATA APCI_1564 support"
select [31mCONFIG_COMEDI_ADDI_WATCHDOG[0m
---help---
Enable support for ADDI-DATA APCI_1564 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_1564.
config [31mCONFIG_COMEDI_ADDI_APCI_16XX[0m
tristate "ADDI-DATA APCI_16xx support"
---help---
Enable support for ADDI-DATA APCI_16xx cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_16xx.
config [31mCONFIG_COMEDI_ADDI_APCI_2032[0m
tristate "ADDI-DATA APCI_2032 support"
select [31mCONFIG_COMEDI_ADDI_WATCHDOG[0m
---help---
Enable support for ADDI-DATA APCI_2032 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_2032.
config [31mCONFIG_COMEDI_ADDI_APCI_2200[0m
tristate "ADDI-DATA APCI_2200 support"
select [31mCONFIG_COMEDI_ADDI_WATCHDOG[0m
---help---
Enable support for ADDI-DATA APCI_2200 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_2200.
config [31mCONFIG_COMEDI_ADDI_APCI_3120[0m
tristate "ADDI-DATA APCI_3120/3001 support"
depends on [31mCONFIG_HAS_DMA[0m
---help---
Enable support for ADDI-DATA APCI_3120/3001 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_3120.
config [31mCONFIG_COMEDI_ADDI_APCI_3501[0m
tristate "ADDI-DATA APCI_3501 support"
---help---
Enable support for ADDI-DATA APCI_3501 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_3501.
config [31mCONFIG_COMEDI_ADDI_APCI_3XXX[0m
tristate "ADDI-DATA APCI_3xxx support"
---help---
Enable support for ADDI-DATA APCI_3xxx cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called addi_apci_3xxx.
config [31mCONFIG_COMEDI_ADL_PCI6208[0m
tristate "ADLink PCI-6208A support"
---help---
Enable support for ADLink [31mCONFIG_PCI[0m-6208A cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adl_pci6208.
config [31mCONFIG_COMEDI_ADL_PCI7X3X[0m
tristate "ADLink PCI-723X/743X isolated digital i/o board support"
---help---
Enable support for ADlink [31mCONFIG_PCI[0m-723X/743X isolated digital i/o boards.
Supported boards include the 32-channel [31mCONFIG_PCI[0m-7230 (16 in/16 out),
[31mCONFIG_PCI[0m-7233 (32 in), and [31mCONFIG_PCI[0m-7234 (32 out) as well as the 64-channel
[31mCONFIG_PCI[0m-7432 (32 in/32 out), [31mCONFIG_PCI[0m-7433 (64 in), and [31mCONFIG_PCI[0m-7434 (64 out).
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adl_pci7x3x.
config [31mCONFIG_COMEDI_ADL_PCI8164[0m
tristate "ADLink PCI-8164 4 Axes Motion Control board support"
---help---
Enable support for ADlink [31mCONFIG_PCI[0m-8164 4 Axes Motion Control board
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adl_pci8164.
config [31mCONFIG_COMEDI_ADL_PCI9111[0m
tristate "ADLink PCI-9111HR support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for ADlink PCI9111 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adl_pci9111.
config [31mCONFIG_COMEDI_ADL_PCI9118[0m
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
depends on [31mCONFIG_HAS_DMA[0m
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for ADlink [31mCONFIG_PCI[0m-9118DG, [31mCONFIG_PCI[0m-9118HG, [31mCONFIG_PCI[0m-9118HR cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adl_pci9118.
config [31mCONFIG_COMEDI_ADV_PCI1710[0m
tristate "Advantech PCI-171x and PCI-1731 support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Advantech [31mCONFIG_PCI[0m-1710, [31mCONFIG_PCI[0m-1710HG, [31mCONFIG_PCI[0m-1711,
[31mCONFIG_PCI[0m-1713 and [31mCONFIG_PCI[0m-1731
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adv_pci1710.
config [31mCONFIG_COMEDI_ADV_PCI1720[0m
tristate "Advantech PCI-1720 support"
---help---
Enable support for Advantech [31mCONFIG_PCI[0m-1720 Analog Output board.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adv_pci1720.
config [31mCONFIG_COMEDI_ADV_PCI1723[0m
tristate "Advantech PCI-1723 support"
---help---
Enable support for Advantech [31mCONFIG_PCI[0m-1723 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adv_pci1723.
config [31mCONFIG_COMEDI_ADV_PCI1724[0m
tristate "Advantech PCI-1724U support"
---help---
Enable support for Advantech [31mCONFIG_PCI[0m-1724U cards. These are 32-channel
analog output cards with voltage and current loop output ranges and
14-bit resolution.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adv_pci1724.
config [31mCONFIG_COMEDI_ADV_PCI1760[0m
tristate "Advantech PCI-1760 support"
---help---
Enable support for Advantech [31mCONFIG_PCI[0m-1760 board.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adv_pci1760.
config [31mCONFIG_COMEDI_ADV_PCI_DIO[0m
tristate "Advantech PCI DIO card support"
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for Advantech [31mCONFIG_PCI[0m [31mCONFIG_DIO[0m cards
[31mCONFIG_PCI[0m-1730, [31mCONFIG_PCI[0m-1733, [31mCONFIG_PCI[0m-1734, [31mCONFIG_PCI[0m-1735U, [31mCONFIG_PCI[0m-1736UP, [31mCONFIG_PCI[0m-1739U,
[31mCONFIG_PCI[0m-1750, [31mCONFIG_PCI[0m-1751, [31mCONFIG_PCI[0m-1752, [31mCONFIG_PCI[0m-1753/[31mCONFIG_E[0m, [31mCONFIG_PCI[0m-1754, [31mCONFIG_PCI[0m-1756 and
[31mCONFIG_PCI[0m-1762
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called adv_pci_dio.
config [31mCONFIG_COMEDI_AMPLC_DIO200_PCI[0m
tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
select [31mCONFIG_COMEDI_AMPLC_DIO200[0m
---help---
Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
and PCIe296 [31mCONFIG_DIO[0m boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called amplc_dio200_pci.
config [31mCONFIG_COMEDI_AMPLC_PC236_PCI[0m
tristate "Amplicon PCI236 DIO board support"
select [31mCONFIG_COMEDI_AMPLC_PC236[0m
---help---
Enable support for Amplicon PCI236 [31mCONFIG_DIO[0m board.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called amplc_pci236.
config [31mCONFIG_COMEDI_AMPLC_PC263_PCI[0m
tristate "Amplicon PCI263 relay board support"
---help---
Enable support for Amplicon PCI263 relay board. This is a [31mCONFIG_PCI[0m board
with 16 reed relay output channels.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called amplc_pci263.
config [31mCONFIG_COMEDI_AMPLC_PCI224[0m
tristate "Amplicon PCI224 and PCI234 support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Amplicon PCI224 and PCI234 AO boards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called amplc_pci224.
config [31mCONFIG_COMEDI_AMPLC_PCI230[0m
tristate "Amplicon PCI230 and PCI260 support"
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
boards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called amplc_pci230.
config [31mCONFIG_COMEDI_CONTEC_PCI_DIO[0m
tristate "Contec PIO1616L digital I/O board support"
---help---
Enable support for the Contec PIO1616L digital I/O board
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called contec_pci_dio.
config [31mCONFIG_COMEDI_DAS08_PCI[0m
tristate "DAS-08 PCI support"
select [31mCONFIG_COMEDI_DAS08[0m
---help---
Enable support for [31mCONFIG_PCI[0m DAS-08 cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called das08_pci.
config [31mCONFIG_COMEDI_DT3000[0m
tristate "Data Translation DT3000 series support"
---help---
Enable support for Data Translation DT3000 series
DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
DT3004-200
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dt3000.
config [31mCONFIG_COMEDI_DYNA_PCI10XX[0m
tristate "Dynalog PCI DAQ series support"
---help---
Enable support for Dynalog [31mCONFIG_PCI[0m DAQ series
[31mCONFIG_PCI[0m-1050
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dyna_pci10xx.
config [31mCONFIG_COMEDI_GSC_HPDI[0m
tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
---help---
Enable support for General Standards Corporation high speed parallel
digital interface rs485 boards [31mCONFIG_PCI[0m-HPDI32 and PMC-HPDI32.
Only receive mode works, transmit not supported.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called gsc_hpdi.
config [31mCONFIG_COMEDI_MF6X4[0m
tristate "Humusoft MF634 and MF624 DAQ Card support"
---help---
This driver supports both Humusoft MF634 and MF624 Data acquisition
cards. The legacy Humusoft MF614 card is not supported.
config [31mCONFIG_COMEDI_ICP_MULTI[0m
tristate "Inova ICP_MULTI support"
---help---
Enable support for Inova ICP_MULTI card
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called icp_multi.
config [31mCONFIG_COMEDI_DAQBOARD2000[0m
tristate "IOtech DAQboard/2000 support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for the IOtech DAQboard/2000
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called daqboard2000.
config [31mCONFIG_COMEDI_JR3_PCI[0m
tristate "JR3/PCI force sensor board support"
---help---
Enable support for JR3/[31mCONFIG_PCI[0m force sensor boards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called jr3_pci.
config [31mCONFIG_COMEDI_KE_COUNTER[0m
tristate "Kolter-Electronic PCI Counter 1 card support"
---help---
Enable support for Kolter-Electronic [31mCONFIG_PCI[0m Counter 1 cards
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ke_counter.
config [31mCONFIG_COMEDI_CB_PCIDAS64[0m
tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for ComputerBoards/MeasurementComputing [31mCONFIG_PCI[0m-DAS 64xx,
60xx, and 4020 series with the PLX 9080 [31mCONFIG_PCI[0m controller
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called cb_pcidas64.
config [31mCONFIG_COMEDI_CB_PCIDAS[0m
tristate "MeasurementComputing PCI-DAS support"
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for ComputerBoards/MeasurementComputing [31mCONFIG_PCI[0m-DAS with
AMCC S5933 PCIcontroller: [31mCONFIG_PCI[0m-DAS1602/16, [31mCONFIG_PCI[0m-DAS1602/16jr,
[31mCONFIG_PCI[0m-DAS1602/12, [31mCONFIG_PCI[0m-DAS1200, [31mCONFIG_PCI[0m-DAS1200jr, [31mCONFIG_PCI[0m-DAS1000, [31mCONFIG_PCI[0m-DAS1001
and PCI_DAS1002.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called cb_pcidas.
config [31mCONFIG_COMEDI_CB_PCIDDA[0m
tristate "MeasurementComputing PCI-DDA series support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for ComputerBoards/MeasurementComputing [31mCONFIG_PCI[0m-DDA
series: [31mCONFIG_PCI[0m-DDA08/12, [31mCONFIG_PCI[0m-DDA04/12, [31mCONFIG_PCI[0m-DDA02/12, [31mCONFIG_PCI[0m-DDA08/16,
[31mCONFIG_PCI[0m-DDA04/16 and [31mCONFIG_PCI[0m-DDA02/16
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called cb_pcidda.
config [31mCONFIG_COMEDI_CB_PCIMDAS[0m
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for ComputerBoards/MeasurementComputing [31mCONFIG_PCI[0m Migration
series PCIM-DAS1602/16 and PCIe-DAS1602/16.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called cb_pcimdas.
config [31mCONFIG_COMEDI_CB_PCIMDDA[0m
tristate "MeasurementComputing PCIM-DDA06-16 support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called cb_pcimdda.
config [31mCONFIG_COMEDI_ME4000[0m
tristate "Meilhaus ME-4000 support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Meilhaus [31mCONFIG_PCI[0m data acquisition cards
ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called me4000.
config [31mCONFIG_COMEDI_ME_DAQ[0m
tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
---help---
Enable support for Meilhaus [31mCONFIG_PCI[0m data acquisition cards
ME-2000i, ME-2600i and ME-3000vm1
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called me_daq.
config [31mCONFIG_COMEDI_NI_6527[0m
tristate "NI 6527 support"
---help---
Enable support for the National Instruments 6527 [31mCONFIG_PCI[0m card
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_6527.
config [31mCONFIG_COMEDI_NI_65XX[0m
tristate "NI 65xx static dio PCI card support"
---help---
Enable support for National Instruments 65xx static dio boards.
Supported devices: National Instruments [31mCONFIG_PCI[0m-6509 (ni_65xx),
PXI-6509, [31mCONFIG_PCI[0m-6510, [31mCONFIG_PCI[0m-6511, PXI-6511, [31mCONFIG_PCI[0m-6512, PXI-6512, [31mCONFIG_PCI[0m-6513,
PXI-6513, [31mCONFIG_PCI[0m-6514, PXI-6514, [31mCONFIG_PCI[0m-6515, PXI-6515, [31mCONFIG_PCI[0m-6516, [31mCONFIG_PCI[0m-6517,
[31mCONFIG_PCI[0m-6518, [31mCONFIG_PCI[0m-6519, [31mCONFIG_PCI[0m-6520, [31mCONFIG_PCI[0m-6521, PXI-6521, [31mCONFIG_PCI[0m-6528, PXI-6528
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_65xx.
config [31mCONFIG_COMEDI_NI_660X[0m
tristate "NI 660x counter/timer PCI card support"
depends on [31mCONFIG_HAS_DMA[0m
select [31mCONFIG_COMEDI_NI_TIOCMD[0m
---help---
Enable support for National Instruments [31mCONFIG_PCI[0m-6601 (ni_660x), [31mCONFIG_PCI[0m-6602,
PXI-6602, PXI-6608 and PXI-6624.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_660x.
config [31mCONFIG_COMEDI_NI_670X[0m
tristate "NI 670x PCI card support"
---help---
Enable support for National Instruments [31mCONFIG_PCI[0m-6703 and [31mCONFIG_PCI[0m-6704
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_670x.
config [31mCONFIG_COMEDI_NI_LABPC_PCI[0m
tristate "NI Lab-PC PCI-1200 support"
select [31mCONFIG_COMEDI_NI_LABPC[0m
---help---
Enable support for National Instruments Lab-PC [31mCONFIG_PCI[0m-1200.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_labpc_pci.
config [31mCONFIG_COMEDI_NI_PCIDIO[0m
tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
depends on [31mCONFIG_HAS_DMA[0m
select [31mCONFIG_COMEDI_MITE[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for National Instruments [31mCONFIG_PCI[0m-[31mCONFIG_DIO[0m-32HS, PXI-6533,
[31mCONFIG_PCI[0m-6533 and [31mCONFIG_PCI[0m-6534
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_pcidio.
config [31mCONFIG_COMEDI_NI_PCIMIO[0m
tristate "NI PCI-MIO-E series and M series support"
depends on [31mCONFIG_HAS_DMA[0m
select [31mCONFIG_COMEDI_NI_TIOCMD[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for National Instruments [31mCONFIG_PCI[0m-MIO-[31mCONFIG_E[0m series and [31mCONFIG_M[0m series
(all boards): [31mCONFIG_PCI[0m-MIO-16XE-10, PXI-6030E, [31mCONFIG_PCI[0m-MIO-16E-1,
[31mCONFIG_PCI[0m-MIO-16E-4, [31mCONFIG_PCI[0m-6014, [31mCONFIG_PCI[0m-6040E, PXI-6040E, [31mCONFIG_PCI[0m-6030E, [31mCONFIG_PCI[0m-6031E,
[31mCONFIG_PCI[0m-6032E, [31mCONFIG_PCI[0m-6033E, [31mCONFIG_PCI[0m-6071E, [31mCONFIG_PCI[0m-6023E, [31mCONFIG_PCI[0m-6024E, [31mCONFIG_PCI[0m-6025E,
PXI-6025E, [31mCONFIG_PCI[0m-6034E, [31mCONFIG_PCI[0m-6035E, [31mCONFIG_PCI[0m-6052E, [31mCONFIG_PCI[0m-6110, [31mCONFIG_PCI[0m-6111,
[31mCONFIG_PCI[0m-6220, [31mCONFIG_PCI[0m-6221, [31mCONFIG_PCI[0m-6224, PXI-6224, [31mCONFIG_PCI[0m-6225, PXI-6225, [31mCONFIG_PCI[0m-6229,
[31mCONFIG_PCI[0m-6250, [31mCONFIG_PCI[0m-6251, PCIe-6251, [31mCONFIG_PCI[0m-6254, [31mCONFIG_PCI[0m-6259, PCIe-6259,
[31mCONFIG_PCI[0m-6280, [31mCONFIG_PCI[0m-6281, PXI-6281, [31mCONFIG_PCI[0m-6284, [31mCONFIG_PCI[0m-6289, [31mCONFIG_PCI[0m-6711, PXI-6711,
[31mCONFIG_PCI[0m-6713, PXI-6713, PXI-6071E, [31mCONFIG_PCI[0m-6070E, PXI-6070E, PXI-6052E,
[31mCONFIG_PCI[0m-6036E, [31mCONFIG_PCI[0m-6731, [31mCONFIG_PCI[0m-6733, PXI-6733, [31mCONFIG_PCI[0m-6143, PXI-6143
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_pcimio.
config [31mCONFIG_COMEDI_RTD520[0m
tristate "Real Time Devices PCI4520/DM7520 support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for Real Time Devices PCI4520/DM7520
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called rtd520.
config [31mCONFIG_COMEDI_S626[0m
tristate "Sensoray 626 support"
---help---
Enable support for Sensoray 626
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called s626.
config [31mCONFIG_COMEDI_MITE[0m
depends on [31mCONFIG_HAS_DMA[0m
tristate
config [31mCONFIG_COMEDI_NI_TIOCMD[0m
tristate
depends on [31mCONFIG_HAS_DMA[0m
select [31mCONFIG_COMEDI_NI_TIO[0m
select [31mCONFIG_COMEDI_MITE[0m
endif # [31mCONFIG_COMEDI_PCI_DRIVERS[0m
menuconfig [31mCONFIG_COMEDI_PCMCIA_DRIVERS[0m
tristate "Comedi PCMCIA drivers"
depends on [31mCONFIG_PCMCIA[0m
---help---
Enable support for comedi [31mCONFIG_PCMCIA[0m drivers.
To compile this support as a module, choose [31mCONFIG_M[0m here: the module will
be called comedi_pcmcia.
if [31mCONFIG_COMEDI_PCMCIA_DRIVERS[0m
config [31mCONFIG_COMEDI_CB_DAS16_CS[0m
tristate "CB DAS16 series PCMCIA support"
select [31mCONFIG_COMEDI_8254[0m
---help---
Enable support for the ComputerBoards/MeasurementComputing [31mCONFIG_PCMCIA[0m
cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called cb_das16_cs.
config [31mCONFIG_COMEDI_DAS08_CS[0m
tristate "CB DAS08 PCMCIA support"
select [31mCONFIG_COMEDI_DAS08[0m
---help---
Enable support for the ComputerBoards/MeasurementComputing DAS-08
[31mCONFIG_PCMCIA[0m card
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called das08_cs.
config [31mCONFIG_COMEDI_NI_DAQ_700_CS[0m
tristate "NI DAQCard-700 PCMCIA support"
---help---
Enable support for the National Instruments [31mCONFIG_PCMCIA[0m DAQCard-700 [31mCONFIG_DIO[0m
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_daq_700.
config [31mCONFIG_COMEDI_NI_DAQ_DIO24_CS[0m
tristate "NI DAQ-Card DIO-24 PCMCIA support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for the National Instruments [31mCONFIG_PCMCIA[0m DAQ-Card [31mCONFIG_DIO[0m-24
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_daq_dio24.
config [31mCONFIG_COMEDI_NI_LABPC_CS[0m
tristate "NI DAQCard-1200 PCMCIA support"
select [31mCONFIG_COMEDI_NI_LABPC[0m
---help---
Enable support for the National Instruments [31mCONFIG_PCMCIA[0m DAQCard-1200
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_labpc_cs.
config [31mCONFIG_COMEDI_NI_MIO_CS[0m
tristate "NI DAQCard E series PCMCIA support"
select [31mCONFIG_COMEDI_NI_TIO[0m
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for the National Instruments [31mCONFIG_PCMCIA[0m DAQCard [31mCONFIG_E[0m series
DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
and DAQCard-6036E
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_mio_cs.
config [31mCONFIG_COMEDI_QUATECH_DAQP_CS[0m
tristate "Quatech DAQP PCMCIA data capture card support"
---help---
Enable support for the Quatech DAQP [31mCONFIG_PCMCIA[0m data capture cards
DAQP-208 and DAQP-308
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called quatech_daqp_cs.
endif # [31mCONFIG_COMEDI_PCMCIA_DRIVERS[0m
menuconfig [31mCONFIG_COMEDI_USB_DRIVERS[0m
tristate "Comedi USB drivers"
depends on [31mCONFIG_USB[0m
---help---
Enable support for comedi [31mCONFIG_USB[0m drivers.
To compile this support as a module, choose [31mCONFIG_M[0m here: the module will
be called comedi_usb.
if [31mCONFIG_COMEDI_USB_DRIVERS[0m
config [31mCONFIG_COMEDI_DT9812[0m
tristate "DataTranslation DT9812 USB module support"
---help---
Enable support for the Data Translation DT9812 [31mCONFIG_USB[0m module
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called dt9812.
config [31mCONFIG_COMEDI_NI_USB6501[0m
tristate "NI USB-6501 support"
---help---
Enable support for the National Instruments [31mCONFIG_USB[0m-6501 module.
The NI [31mCONFIG_USB[0m-6501 is a Full-Speed [31mCONFIG_USB[0m 2.0 (12 Mbit/s) device that
provides 24 digital I/O lines channels and one 32-bit counter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called ni_usb6501.
config [31mCONFIG_COMEDI_USBDUX[0m
tristate "ITL USB-DUX-D support"
---help---
Enable support for the Incite Technology Ltd [31mCONFIG_USB[0m-DUX-[31mCONFIG_D[0m Board
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called usbdux.
config [31mCONFIG_COMEDI_USBDUXFAST[0m
tristate "ITL USB-DUXfast support"
---help---
Enable support for the Incite Technology Ltd [31mCONFIG_USB[0m-DUXfast Board
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called usbduxfast.
config [31mCONFIG_COMEDI_USBDUXSIGMA[0m
tristate "ITL USB-DUXsigma support"
---help---
Enable support for the Incite Technology Ltd [31mCONFIG_USB[0m-DUXsigma Board
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called usbduxsigma.
config [31mCONFIG_COMEDI_VMK80XX[0m
tristate "Velleman VM110/VM140 USB Board support"
---help---
Build the Velleman [31mCONFIG_USB[0m Board Low-Level Driver supporting the
K8055/K8061 aka VM110/VM140 devices
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called vmk80xx.
endif # [31mCONFIG_COMEDI_USB_DRIVERS[0m
config [31mCONFIG_COMEDI_8254[0m
tristate
config [31mCONFIG_COMEDI_8255[0m
tristate
config [31mCONFIG_COMEDI_8255_SA[0m
tristate "Standalone 8255 support"
select [31mCONFIG_COMEDI_8255[0m
---help---
Enable support for 8255 digital I/O as a standalone driver.
You should enable compilation this driver if you plan to use a board
that has an 8255 chip at a known I/O base address and there are no
other Comedi drivers for the board.
Note that Comedi drivers for most multi-function boards incorporating
an 8255 chip use the 'comedi_8255' module. Most [31mCONFIG_PCI[0m-based 8255
boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
module.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called 8255.
config [31mCONFIG_COMEDI_KCOMEDILIB[0m
tristate "Comedi kcomedilib"
---help---
Build the kcomedilib.
This is a kernel module used to open and manipulate Comedi devices
from within kernel code. It is currently only used by the
comedi_bond driver, and its functionality has been stripped down to
the needs of that driver, so is currently not very useful for
anything else.
To compile kcomedilib as a module, choose [31mCONFIG_M[0m here: the module will be
called kcomedilib.
config [31mCONFIG_COMEDI_AMPLC_DIO200[0m
select [31mCONFIG_COMEDI_8254[0m
tristate
config [31mCONFIG_COMEDI_AMPLC_PC236[0m
tristate
select [31mCONFIG_COMEDI_8255[0m
config [31mCONFIG_COMEDI_DAS08[0m
tristate
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
config [31mCONFIG_COMEDI_ISADMA[0m
tristate
config [31mCONFIG_COMEDI_NI_LABPC[0m
tristate
select [31mCONFIG_COMEDI_8254[0m
select [31mCONFIG_COMEDI_8255[0m
config [31mCONFIG_COMEDI_NI_LABPC_ISADMA[0m
tristate
select [31mCONFIG_COMEDI_ISADMA[0m
config [31mCONFIG_COMEDI_NI_TIO[0m
tristate
endif # [31mCONFIG_COMEDI[0m