* Clock bindings for Freescale i.MX28
Required properties:
- compatible: Should be "fsl,imx28-clkctrl"
- reg: Address and length of the register set
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX28
clocks and IDs.
Clock ID
------------------
ref_xtal 0
pll0 1
pll1 2
pll2 3
ref_cpu 4
ref_emi 5
ref_io0 6
ref_io1 7
ref_pix 8
ref_hsadc 9
ref_gpmi 10
saif0_sel 11
saif1_sel 12
gpmi_sel 13
ssp0_sel 14
ssp1_sel 15
ssp2_sel 16
ssp3_sel 17
emi_sel 18
etm_sel 19
lcdif_sel 20
cpu 21
ptp_sel 22
cpu_pll 23
cpu_xtal 24
hbus 25
xbus 26
ssp0_div 27
ssp1_div 28
ssp2_div 29
ssp3_div 30
gpmi_div 31
emi_pll 32
emi_xtal 33
lcdif_div 34
etm_div 35
ptp 36
saif0_div 37
saif1_div 38
clk32k_div 39
rtc 40
lradc 41
spdif_div 42
clk32k 43
pwm 44
uart 45
ssp0 46
ssp1 47
ssp2 48
ssp3 49
gpmi 50
spdif 51
emi 52
saif0 53
saif1 54
lcdif 55
etm 56
fec 57
can0 58
can1 59
usb0 60
usb1 61
usb0_phy 62
usb1_phy 63
enet_out 64
Examples:
clks: clkctrl@80040000 {
compatible = "fsl,imx28-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
clocks = <&clks 45>;
status = "disabled";
};