/* * ImgTec IR Decoder setup for JVC protocol. * * Copyright 2012-2014 Imagination Technologies Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include "img-ir-hw.h" /* Convert JVC data to a scancode */ static int img_ir_jvc_scancode(int len, u64 raw, u64 enabled_protocols, struct img_ir_scancode_req *request) { unsigned int cust, data; if (len != 16) return -EINVAL; cust = (raw >> 0) & 0xff; data = (raw >> 8) & 0xff; request->protocol = RC_TYPE_JVC; request->scancode = cust << 8 | data; return IMG_IR_SCANCODE; } /* Convert JVC scancode to JVC data filter */ static int img_ir_jvc_filter(const struct rc_scancode_filter *in, struct img_ir_filter *out, u64 protocols) { unsigned int cust, data; unsigned int cust_m, data_m; cust = (in->data >> 8) & 0xff; cust_m = (in->mask >> 8) & 0xff; data = (in->data >> 0) & 0xff; data_m = (in->mask >> 0) & 0xff; out->data = cust | data << 8; out->mask = cust_m | data_m << 8; return 0; } /* * JVC decoder * See also http://www.sbprojects.com/knowledge/ir/jvc.php * http://support.jvc.com/consumer/support/documents/RemoteCodes.pdf */ struct img_ir_decoder img_ir_jvc = { .type = RC_BIT_JVC, .control = { .decoden = 1, .code_type = IMG_IR_CODETYPE_PULSEDIST, }, /* main timings */ .unit = 527500, /* 527.5 us */ .timings = { /* leader symbol */ .ldr = { .pulse = { 16 /* 8.44 ms */ }, .space = { 8 /* 4.22 ms */ }, }, /* 0 symbol */ .s00 = { .pulse = { 1 /* 527.5 us +-60 us */ }, .space = { 1 /* 527.5 us */ }, }, /* 1 symbol */ .s01 = { .pulse = { 1 /* 527.5 us +-60 us */ }, .space = { 3 /* 1.5825 ms +-40 us */ }, }, /* free time */ .ft = { .minlen = 16, .maxlen = 16, .ft_min = 10, /* 5.275 ms */ }, }, /* scancode logic */ .scancode = img_ir_jvc_scancode, .filter = img_ir_jvc_filter, }; |