Qualcomm PM8xxx PMIC Keypad PROPERTIES - compatible: Usage: required Value type: <string> Definition: must be one of: "qcom,pm8058-keypad" "qcom,pm8921-keypad" - reg: Usage: required Value type: <prop-encoded-array> Definition: address of keypad control register - interrupts: Usage: required Value type: <prop-encoded-array> Definition: the first interrupt specifies the key sense interrupt and the second interrupt specifies the key stuck interrupt. The format of the specifier is defined by the binding document describing the node's interrupt parent. - linux,keymap: Usage: required Value type: <prop-encoded-array> Definition: the linux keymap. More information can be found in input/matrix-keymap.txt. - linux,keypad-no-autorepeat: Usage: optional Value type: <bool> Definition: don't enable autorepeat feature. - wakeup-source: Usage: optional Value type: <bool> Definition: use any event on keypad as wakeup event. (Legacy property supported: "linux,keypad-wakeup") - keypad,num-rows: Usage: required Value type: <u32> Definition: number of rows in the keymap. More information can be found in input/matrix-keymap.txt. - keypad,num-columns: Usage: required Value type: <u32> Definition: number of columns in the keymap. More information can be found in input/matrix-keymap.txt. - debounce: Usage: optional Value type: <u32> Definition: time in microseconds that key must be pressed or release for key sense interrupt to trigger. - scan-delay: Usage: optional Value type: <u32> Definition: time in microseconds to pause between successive scans of the matrix array. - row-hold: Usage: optional Value type: <u32> Definition: time in nanoseconds to pause between scans of each row in the matrix array. EXAMPLE keypad@148 { compatible = "qcom,pm8921-keypad"; reg = <0x148>; interrupt-parent = <&pmicintc>; interrupts = <74 1>, <75 1>; linux,keymap = < MATRIX_KEY(0, 0, KEY_VOLUMEUP) MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) MATRIX_KEY(0, 3, KEY_CAMERA) >; keypad,num-rows = <1>; keypad,num-columns = <5>; debounce = <15>; scan-delay = <32>; row-hold = <91500>; }; |