# # Makefile for the linux kernel. # # Common support obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ serial.o devices.o dma.o fb.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($([31mCONFIG_SND_OMAP_SOC_MCBSP[0m),) obj-y += mcbsp.o endif obj-$([31mCONFIG_OMAP_32K_TIMER[0m) += timer32k.o # OCPI interconnect support for 1710, 1610 and 5912 obj-$([31mCONFIG_ARCH_OMAP16XX[0m) += ocpi.o # Power Management obj-$([31mCONFIG_PM[0m) += pm.o sleep.o i2c-omap-$([31mCONFIG_I2C_OMAP[0m) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) led-y := leds.o usb-fs-$([31mCONFIG_USB[0m) := usb.o obj-y += $(usb-fs-m) $(usb-fs-y) # Specific board support obj-$([31mCONFIG_MACH_OMAP_H2[0m) += board-h2.o board-h2-mmc.o \ board-nand.o obj-$([31mCONFIG_MACH_OMAP_INNOVATOR[0m) += board-innovator.o obj-$([31mCONFIG_MACH_OMAP_GENERIC[0m) += board-generic.o obj-$([31mCONFIG_MACH_OMAP_PERSEUS2[0m) += board-perseus2.o board-nand.o obj-$([31mCONFIG_MACH_OMAP_FSAMPLE[0m) += board-fsample.o board-nand.o obj-$([31mCONFIG_MACH_OMAP_OSK[0m) += board-osk.o obj-$([31mCONFIG_MACH_OMAP_H3[0m) += board-h3.o board-h3-mmc.o \ board-nand.o obj-$([31mCONFIG_MACH_OMAP_PALMTE[0m) += board-palmte.o obj-$([31mCONFIG_MACH_OMAP_PALMZ71[0m) += board-palmz71.o obj-$([31mCONFIG_MACH_OMAP_PALMTT[0m) += board-palmtt.o obj-$([31mCONFIG_MACH_NOKIA770[0m) += board-nokia770.o obj-$([31mCONFIG_MACH_AMS_DELTA[0m) += board-ams-delta.o ams-delta-fiq.o \ ams-delta-fiq-handler.o obj-$([31mCONFIG_MACH_SX1[0m) += board-sx1.o board-sx1-mmc.o obj-$([31mCONFIG_MACH_HERALD[0m) += board-htcherald.o ifeq ($([31mCONFIG_ARCH_OMAP15XX[0m),y) # Innovator-1510 FPGA obj-$([31mCONFIG_MACH_OMAP_INNOVATOR[0m) += fpga.o endif # GPIO obj-$([31mCONFIG_ARCH_OMAP730[0m) += gpio7xx.o obj-$([31mCONFIG_ARCH_OMAP850[0m) += gpio7xx.o obj-$([31mCONFIG_ARCH_OMAP15XX[0m) += gpio15xx.o obj-$([31mCONFIG_ARCH_OMAP16XX[0m) += gpio16xx.o ifneq ($([31mCONFIG_FB_OMAP[0m),) obj-y += lcd_dma.o endif |