/*
* Copyright 2007-2010 Analog Devices Inc.
*
* Licensed under the Clear BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF522_H
#define _DEF_BF522_H
/* ************************************************************** */
/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */
/* ************************************************************** */
/* ==== begin from defBF534.h ==== */
/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
#define PLL_CTL 0xFFC00000 /* PLL Control Register */
#define PLL_DIV 0xFFC00004 /* PLL Divide Register */
#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
#define PLL_STAT 0xFFC0000C /* PLL Status Register */
#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
#define CHIPID 0xFFC00014 /* Device ID Register */
/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
#define SWRST 0xFFC00100 /* Software Reset Register */
#define SYSCR 0xFFC00104 /* System Configuration Register */
#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */
#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */
#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */
#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */
/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */
#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */
#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */
#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */
#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */
#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */
#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */
/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
#define RTC_STAT 0xFFC00300 /* RTC Status Register */
#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */
/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
#define UART0_THR 0xFFC00400 /* Transmit Holding register */
#define UART0_RBR 0xFFC00400 /* Receive Buffer register */
#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
#define UART0_LCR 0xFFC0040C /* Line Control Register */
#define UART0_MCR 0xFFC00410 /* Modem Control Register */
#define UART0_LSR 0xFFC00414 /* Line Status Register */
#define UART0_MSR 0xFFC00418 /* Modem Status Register */
#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
#define UART0_GCTL 0xFFC00424 /* Global Control Register */
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
#define SPI0_REGBASE 0xFFC00500
#define SPI_CTL 0xFFC00500 /* SPI Control Register */
#define SPI_FLG 0xFFC00504 /* SPI Flag register */
#define SPI_STAT 0xFFC00508 /* SPI Status register */
#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */
#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */
#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */
#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */
#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */
#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */
#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */
#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */
#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */
#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */
#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */
#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */
#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */
#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */
#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */
#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */
#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */
/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
/* DMA Traffic Control Registers */
#define DMAC_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
#define DMAC_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */
#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */
#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */
#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */
#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */
#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */
#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */
#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */
#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */
#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */
#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */
#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */
#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */
#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */
#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */
#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */
#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */
#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */
#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */
#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */
#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */
#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */
#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */
#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */
#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */
#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */
#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */
#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */
#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */
#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */
#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */
#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */
#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */
#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */
#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */
#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */
#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */
#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */
#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */
#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
#define PPI_STATUS 0xFFC01004 /* PPI Status Register */
#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
#define TWI0_REGBASE 0xFFC01400
#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
#define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */
#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
#define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
#define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */
#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */
#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */
#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */
#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */
#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */
#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */
#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */
#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */
#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */
#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */
#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */
#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */
#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */
#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */
#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */
#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */
/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
#define UART1_THR 0xFFC02000 /* Transmit Holding register */
#define UART1_RBR 0xFFC02000 /* Receive Buffer register */
#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */
#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */
#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */
#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */
#define UART1_LCR 0xFFC0200C /* Line Control Register */
#define UART1_MCR 0xFFC02010 /* Modem Control Register */
#define UART1_LSR 0xFFC02014 /* Line Status Register */
#define UART1_MSR 0xFFC02018 /* Modem Status Register */
#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */
#define UART1_GCTL 0xFFC02024 /* Global Control Register */
/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */
#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */
#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */
#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */
/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
#define PORTF_MUX 0xFFC03210 /* Port F mux control */
#define PORTG_MUX 0xFFC03214 /* Port G mux control */
#define PORTH_MUX 0xFFC03218 /* Port H mux control */
#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */
#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */
#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */
#define PORTF_SLEW 0xFFC03230 /* Port F slew control */
#define PORTG_SLEW 0xFFC03234 /* Port G slew control */
#define PORTH_SLEW 0xFFC03238 /* Port H slew control */
#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */
#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */
#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */
#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */
#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */
#define MISCPORT_HYSTERESIS 0xFFC03288 /* Misc Port Schmitt trigger control */
/***********************************************************************************
** System MMR Register Bits And Macros
**
** Disclaimer: All macros are intended to make C and Assembly code more readable.
** Use these macros carefully, as any that do left shifts for field
** depositing will result in the lower order bits being destroyed. Any
** macro that shifts left to properly position the bit-field should be
** used as part of an OR to initialize a register and NOT as a dynamic
** modifier UNLESS the lower order bits are saved and ORed back in when
** the macro is used.
*************************************************************************************/
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
#define CHIPID_FAMILY 0x0FFFF000
#define CHIPID_MANUFACTURE 0x00000FFE
/* SWRST Masks */
#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
/* SYSCR Masks */
#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */
#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */
/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
#if 0
#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */
#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */
#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */
#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */
#define IRQ_TWI 0x00000200 /* TWI Interrupt */
#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */
#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */
#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */
#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */
#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */
#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */
#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */
#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */
#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */
#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */
#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */
#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */
#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */
#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */
#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */
#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */
#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */
#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */
#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */
#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */
#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */
#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */
#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */
#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */
#endif
/* SIC_IAR0 Macros */
#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */
#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */
#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */
#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */
#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */
#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */
#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */
#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */
/* SIC_IAR1 Macros */
#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */
#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */
#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */
#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */
#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */
#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */
#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */
#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */
/* SIC_IAR2 Macros */
#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */
#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */
#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */
#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */
#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */
#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */
#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */
#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */
/* SIC_IAR3 Macros */
#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */
#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */
#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */
#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */
#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */
#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */
#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */
#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */
/* SIC_IMASK Masks */
#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
/* SIC_IWR Masks */
#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
/* **************** GENERAL PURPOSE TIMER MASKS **********************/
/* TIMER_ENABLE Masks */
#define TIMEN0 0x0001 /* Enable Timer 0 */
#define TIMEN1 0x0002 /* Enable Timer 1 */
#define TIMEN2 0x0004 /* Enable Timer 2 */
#define TIMEN3 0x0008 /* Enable Timer 3 */
#define TIMEN4 0x0010 /* Enable Timer 4 */
#define TIMEN5 0x0020 /* Enable Timer 5 */
#define TIMEN6 0x0040 /* Enable Timer 6 */
#define TIMEN7 0x0080 /* Enable Timer 7 */
/* TIMER_DISABLE Masks */
#define TIMDIS0 TIMEN0 /* Disable Timer 0 */
#define TIMDIS1 TIMEN1 /* Disable Timer 1 */
#define TIMDIS2 TIMEN2 /* Disable Timer 2 */
#define TIMDIS3 TIMEN3 /* Disable Timer 3 */
#define TIMDIS4 TIMEN4 /* Disable Timer 4 */
#define TIMDIS5 TIMEN5 /* Disable Timer 5 */
#define TIMDIS6 TIMEN6 /* Disable Timer 6 */
#define TIMDIS7 TIMEN7 /* Disable Timer 7 */
/* TIMER_STATUS Masks */
#define TIMIL0 0x00000001 /* Timer 0 Interrupt */
#define TIMIL1 0x00000002 /* Timer 1 Interrupt */
#define TIMIL2 0x00000004 /* Timer 2 Interrupt */
#define TIMIL3 0x00000008 /* Timer 3 Interrupt */
#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */
#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
#define TIMIL4 0x00010000 /* Timer 4 Interrupt */
#define TIMIL5 0x00020000 /* Timer 5 Interrupt */
#define TIMIL6 0x00040000 /* Timer 6 Interrupt */
#define TIMIL7 0x00080000 /* Timer 7 Interrupt */
#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */
#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */
#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */
#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */
#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
#define TOVL_ERR0 TOVF_ERR0
#define TOVL_ERR1 TOVF_ERR1
#define TOVL_ERR2 TOVF_ERR2
#define TOVL_ERR3 TOVF_ERR3
#define TOVL_ERR4 TOVF_ERR4
#define TOVL_ERR5 TOVF_ERR5
#define TOVL_ERR6 TOVF_ERR6
#define TOVL_ERR7 TOVF_ERR7
/* TIMERx_CONFIG Masks */
#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
#define WDTH_CAP 0x0002 /* Width Capture Input Mode */
#define EXT_CLK 0x0003 /* External Clock Mode */
#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
#define PERIOD_CNT 0x0008 /* Period Count */
#define IRQ_ENA 0x0010 /* Interrupt Request Enable */
#define TIN_SEL 0x0020 /* Timer Input Select */
#define OUT_DIS 0x0040 /* Output Pad Disable */
#define CLK_SEL 0x0080 /* Timer Clock Select */
#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
#define EMU_RUN 0x0200 /* Emulation Behavior Select */
#define ERR_TYP 0xC000 /* Error Type */
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
/* EBIU_AMGCTL Masks */
#define AMCKEN 0x0001 /* Enable CLKOUT */
#define AMBEN_NONE 0x0000 /* All Banks Disabled */
#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
/* EBIU_AMBCTL0 Masks */
#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */
#define B0RDYPOL 0x00000002 /* B0 RDY Active High */
#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */
#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */
#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */
#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */
#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */
#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */
#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */
#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */
#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */
#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */
#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */
#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */
#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */
#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */
#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */
#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */
#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */
#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */
#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */
#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */
#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */
#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */
#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */
#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */
#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */
#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */
#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */
#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */
#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */
#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */
#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */
#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */
#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */
#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */
#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */
#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */
#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */
#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */
#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */
#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */
#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */
#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */
#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */
#define B1RDYPOL 0x00020000 /* B1 RDY Active High */
#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */
#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */
#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */
#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */
#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */
#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */
#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */
#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */
#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */
#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */
#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */
#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */
#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */
#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */
#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */
#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */
#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */
#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */
#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */
#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */
#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */
#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */
#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */
#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */
#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */
#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */
#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */
#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */
#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */
#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */
#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */
#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */
#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */
#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */
#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */
#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */
#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */
#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */
#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */
#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */
#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */
#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */
/* EBIU_AMBCTL1 Masks */
#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */
#define B2RDYPOL 0x00000002 /* B2 RDY Active High */
#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */
#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */
#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */
#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */
#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */
#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */
#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */
#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */
#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */
#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */
#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */
#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */
#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */
#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */
#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */
#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */
#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */
#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */
#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */
#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */
#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */
#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */
#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */
#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */
#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */
#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */
#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */
#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */
#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */
#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */
#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */
#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */
#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */
#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */
#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */
#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */
#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */
#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */
#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */
#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */
#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */
#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */
#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */
#define B3RDYPOL 0x00020000 /* B3 RDY Active High */
#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */
#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */
#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */
#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */
#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */
#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */
#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */
#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */
#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */
#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */
#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */
#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */
#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */
#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */
#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */
#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */
#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */
#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */
#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */
#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */
#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */
#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */
#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */
#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */
#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */
#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */
#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */
#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */
#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */
#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */
#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */
#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */
#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */
#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */
#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */
#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */
#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */
#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */
#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */
#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */
#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */
#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */
/* ********************** SDRAM CONTROLLER MASKS **********************************************/
/* EBIU_SDGCTL Masks */
#define SCTLE 0x00000001 /* Enable SDRAM Signals */
#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */
#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */
#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */
#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */
#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */
#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */
#define EBUFE 0x02000000 /* Enable External Buffering Timing */
#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */
#define EMREN 0x10000000 /* Extended Mode Register Enable */
#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */
#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */
/* EBIU_SDBCTL Masks */
#define EBE 0x0001 /* Enable SDRAM External Bank */
#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */
#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */
#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
/* EBIU_SDSTAT Masks */
#define SDCI 0x0001 /* SDRAM Controller Idle */
#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */
#define SDPUA 0x0004 /* SDRAM Power-Up Active */
#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */
#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */
#define BGSTAT 0x0020 /* Bus Grant Status */
/* ************************** DMA CONTROLLER MASKS ********************************/
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
#define PMAP 0xF000 /* Peripheral Mapped To This Channel */
#define PMAP_PPI 0x0000 /* PPI Port DMA */
#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */
#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */
#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */
#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */
#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */
#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */
#define PMAP_SPI 0x7000 /* SPI Port DMA */
#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */
#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */
#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
/* PPI_CONTROL Masks */
#define PORT_EN 0x0001 /* PPI Port Enable */
#define PORT_DIR 0x0002 /* PPI Port Direction */
#define XFR_TYPE 0x000C /* PPI Transfer Type */
#define PORT_CFG 0x0030 /* PPI Port Configuration */
#define FLD_SEL 0x0040 /* PPI Active Field Select */
#define PACK_EN 0x0080 /* PPI Packing Mode */
#define DMA32 0x0100 /* PPI 32-bit DMA Enable */
#define SKIP_EN 0x0200 /* PPI Skip Element Enable */
#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
#define DLEN_8 0x0000 /* Data Length = 8 Bits */
#define DLEN_10 0x0800 /* Data Length = 10 Bits */
#define DLEN_11 0x1000 /* Data Length = 11 Bits */
#define DLEN_12 0x1800 /* Data Length = 12 Bits */
#define DLEN_13 0x2000 /* Data Length = 13 Bits */
#define DLEN_14 0x2800 /* Data Length = 14 Bits */
#define DLEN_15 0x3000 /* Data Length = 15 Bits */
#define DLEN_16 0x3800 /* Data Length = 16 Bits */
#define DLENGTH 0x3800 /* PPI Data Length */
#define POLC 0x4000 /* PPI Clock Polarity */
#define POLS 0x8000 /* PPI Frame Sync Polarity */
/* PPI_STATUS Masks */
#define FLD 0x0400 /* Field Indicator */
#define FT_ERR 0x0800 /* Frame Track Error */
#define OVR 0x1000 /* FIFO Overflow Error */
#define UNDR 0x2000 /* FIFO Underrun Error */
#define ERR_DET 0x4000 /* Error Detected Indicator */
#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
/* Omit CAN masks from defBF534.h */
/* ******************* PIN CONTROL REGISTER MASKS ************************/
/* PORT_MUX Masks */
#define PJSE 0x0001 /* Port J SPI/SPORT Enable */
#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */
#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */
#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */
#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */
#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */
#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */
#define PFDE 0x0008 /* Port F DMA Request Enable */
#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */
#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */
#define PFTE 0x0010 /* Port F Timer Enable */
#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */
#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */
#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */
#define PFS6E_TIMER 0x0000 /* Enable TMR5 */
#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */
#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */
#define PFS5E_TIMER 0x0000 /* Enable TMR4 */
#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */
#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */
#define PFS4E_TIMER 0x0000 /* Enable TMR3 */
#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */
#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */
#define PFFE_TIMER 0x0000 /* Enable TMR2 */
#define PFFE_PPI 0x0100 /* Enable PPI FS3 */
#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */
#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */
#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */
#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */
#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */
#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */
#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */
#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
/* entry addresses of the user-callable Boot ROM functions */
#define _BOOTROM_RESET 0xEF000000
#define _BOOTROM_FINAL_INIT 0xEF000002
#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
#define PGDE_UART PFDE_UART
#define PGDE_DMA PFDE_DMA
#define CKELOW SCKELOW
/* ==== end from defBF534.h ==== */
/* HOST Port Registers */
#define HOST_CONTROL 0xffc03400 /* HOST Control Register */
#define HOST_STATUS 0xffc03404 /* HOST Status Register */
#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */
/* Counter Registers */
#define CNT_CONFIG 0xffc03500 /* Configuration Register */
#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */
#define CNT_STATUS 0xffc03508 /* Status Register */
#define CNT_COMMAND 0xffc0350c /* Command Register */
#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */
#define CNT_COUNTER 0xffc03514 /* Counter Register */
#define CNT_MAX 0xffc03518 /* Maximal Count Register */
#define CNT_MIN 0xffc0351c /* Minimal Count Register */
/* OTP/FUSE Registers */
#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */
#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */
#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */
#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */
/* Security Registers */
#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */
#define SECURE_CONTROL 0xffc03624 /* Secure Control */
#define SECURE_STATUS 0xffc03628 /* Secure Status */
/* OTP Read/Write Data Buffer Registers */
#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
/* NFC Registers */
#define NFC_CTL 0xffc03700 /* NAND Control Register */
#define NFC_STAT 0xffc03704 /* NAND Status Register */
#define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */
#define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */
#define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */
#define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */
#define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */
#define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */
#define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */
#define NFC_RST 0xffc03724 /* NAND ECC Reset Register */
#define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */
#define NFC_READ 0xffc0372c /* NAND Read Data Register */
#define NFC_ADDR 0xffc03740 /* NAND Address Register */
#define NFC_CMD 0xffc03744 /* NAND Command Register */
#define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */
#define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */
/* ********************************************************** */
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
/* and MULTI BIT READ MACROS */
/* ********************************************************** */
/* Bit masks for HOST_CONTROL */
#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
#define HOST_CNTR_nHOST_EN 0x0
#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
#define HOST_CNTR_nHOST_END 0x0
#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
#define HOST_CNTR_nDATA_SIZE 0x0
#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
#define HOST_CNTR_nHOST_RST 0x0
#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
#define HOST_CNTR_nHRDY_OVR 0x0
#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
#define HOST_CNTR_nINT_MODE 0x0
#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
#define HOST_CNTR_ nBT_EN 0x0
#define HOST_CNTR_EHW 0x100 /* Enable Host Write */
#define HOST_CNTR_nEHW 0x0
#define HOST_CNTR_EHR 0x200 /* Enable Host Read */
#define HOST_CNTR_nEHR 0x0
#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
#define HOST_CNTR_nBDR 0x0
/* Bit masks for HOST_STATUS */
#define HOST_STAT_READY 0x1 /* DMA Ready */
#define HOST_STAT_nREADY 0x0
#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
#define HOST_STAT_nFIFOFULL 0x0
#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
#define HOST_STAT_nFIFOEMPTY 0x0
#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
#define HOST_STAT_nCOMPLETE 0x0
#define HOST_STAT_HSHK 0x10 /* Host Handshake */
#define HOST_STAT_nHSHK 0x0
#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
#define HOST_STAT_nTIMEOUT 0x0
#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
#define HOST_STAT_nHIRQ 0x0
#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
#define HOST_STAT_nALLOW_CNFG 0x0
#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
#define HOST_STAT_nDMA_DIR 0x0
#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
#define HOST_STAT_nBTE 0x0
#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
#define HOST_STAT_nHOSTRD_DONE 0x0
/* Bit masks for HOST_TIMEOUT */
#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
#define nEMUDABL 0x0
#define RSTDABL 0x2 /* Reset Disable */
#define nRSTDABL 0x0
#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
#define DMA0OVR 0x800 /* DMA0 Memory Access Override */
#define nDMA0OVR 0x0
#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
#define nDMA1OVR 0x0
#define EMUOVR 0x4000 /* Emulation Override */
#define nEMUOVR 0x0
#define OTPSEN 0x8000 /* OTP Secrets Enable. */
#define nOTPSEN 0x0
#define L2DABL 0x70000 /* L2 Memory Disable. */
/* Bit masks for SECURE_CONTROL */
#define SECURE0 0x1 /* SECURE 0 */
#define nSECURE0 0x0
#define SECURE1 0x2 /* SECURE 1 */
#define nSECURE1 0x0
#define SECURE2 0x4 /* SECURE 2 */
#define nSECURE2 0x0
#define SECURE3 0x8 /* SECURE 3 */
#define nSECURE3 0x0
/* Bit masks for SECURE_STATUS */
#define SECMODE 0x3 /* Secured Mode Control State */
#define NMI 0x4 /* Non Maskable Interrupt */
#define nNMI 0x0
#define AFVALID 0x8 /* Authentication Firmware Valid */
#define nAFVALID 0x0
#define AFEXIT 0x10 /* Authentication Firmware Exit */
#define nAFEXIT 0x0
#define SECSTAT 0xe0 /* Secure Status */
#endif /* _DEF_BF522_H */