menuconfig [31mCONFIG_CAN_SJA1000[0m
tristate "Philips/NXP SJA1000 devices"
depends on [31mCONFIG_HAS_IOMEM[0m
if [31mCONFIG_CAN_SJA1000[0m
config [31mCONFIG_CAN_SJA1000_ISA[0m
tristate "ISA Bus based legacy SJA1000 driver"
---help---
This driver adds legacy support for SJA1000 chips connected to
the [31mCONFIG_ISA[0m bus using I/O port, memory mapped or indirect access.
config [31mCONFIG_CAN_SJA1000_PLATFORM[0m
tristate "Generic Platform Bus based SJA1000 driver"
---help---
This driver adds support for the SJA1000 chips connected to
the "platform bus" (Linux abstraction for directly to the
processor attached devices). Which can be found on various
boards from Phytec (http://www.phytec.de) like the PCM027,
PCM038. It also provides the OpenFirmware "platform bus" found
on embedded systems with OpenFirmware bindings, e.g. if you
have a PowerPC based system you may want to enable this option.
config [31mCONFIG_CAN_EMS_PCMCIA[0m
tristate "EMS CPC-CARD Card"
depends on [31mCONFIG_PCMCIA[0m
---help---
This driver is for the one or two channel CPC-CARD cards from
EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
config [31mCONFIG_CAN_EMS_PCI[0m
tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
depends on [31mCONFIG_PCI[0m
---help---
This driver is for the one, two or four channel CPC-[31mCONFIG_PCI[0m,
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
config [31mCONFIG_CAN_PEAK_PCMCIA[0m
tristate "PEAK PCAN-PC Card"
depends on [31mCONFIG_PCMCIA[0m
depends on [31mCONFIG_HAS_IOPORT_MAP[0m
---help---
This driver is for the PCAN-PC Card [31mCONFIG_PCMCIA[0m adapter (1 or 2 channels)
from PEAK-System (http://www.peak-system.com). To compile this
driver as a module, choose [31mCONFIG_M[0m here: the module will be called
peak_pcmcia.
config [31mCONFIG_CAN_PEAK_PCI[0m
tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
depends on [31mCONFIG_PCI[0m
---help---
This driver is for the PCAN-[31mCONFIG_PCI[0m/PCIe/miniPCI cards
(1, 2, 3 or 4 channels) from PEAK-System Technik
(http://www.peak-system.com).
config [31mCONFIG_CAN_PEAK_PCIEC[0m
bool "PEAK PCAN-ExpressCard Cards"
depends on [31mCONFIG_CAN_PEAK_PCI[0m
select [31mCONFIG_I2C[0m
select [31mCONFIG_I2C_ALGOBIT[0m
default y
---help---
Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
Technik. This will also automatically select [31mCONFIG_I2C[0m and I2C_ALGO
configuration options.
config [31mCONFIG_CAN_KVASER_PCI[0m
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on [31mCONFIG_PCI[0m
---help---
This driver is for the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
config [31mCONFIG_CAN_PLX_PCI[0m
tristate "PLX90xx PCI-bridge based Cards"
depends on [31mCONFIG_PCI[0m
---help---
This driver is for [31mCONFIG_CAN[0m interface cards based on
the PLX90xx [31mCONFIG_PCI[0m bridge.
Driver supports now:
- Adlink [31mCONFIG_PCI[0m-7841/cPCI-7841 card (http://www.adlinktech.com/)
- Adlink [31mCONFIG_PCI[0m-7841/cPCI-7841 SE card
- esd [31mCONFIG_CAN[0m-[31mCONFIG_PCI[0m/CPCI/PCI104/200 (http://www.esd.eu/)
- esd [31mCONFIG_CAN[0m-[31mCONFIG_PCI[0m/PMC/266
- esd [31mCONFIG_CAN[0m-PCIe/2000
- Marathon [31mCONFIG_CAN[0m-bus-[31mCONFIG_PCI[0m card (http://www.marathon.ru/)
- TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
- IXXAT Automation PC-I 04/[31mCONFIG_PCI[0m card (http://www.ixxat.com/)
- Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
config [31mCONFIG_CAN_TSCAN1[0m
tristate "TS-CAN1 PC104 boards"
depends on [31mCONFIG_ISA[0m
help
This driver is for Technologic Systems' TSCAN-1 [31mCONFIG_PC104[0m boards.
http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
The driver supports multiple boards and automatically configures them:
PLD IO base addresses are read from jumpers JP1 and JP2,
IRQ numbers are read from jumpers JP4 and JP5,
SJA1000 IO base addresses are chosen heuristically (first that works).
endif