/* Intel PRO/1000 Linux driver * Copyright(c) 1999 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * The full GNU General Public License is included in this distribution in * the file called "COPYING". * * Contact Information: * Linux NICS <linux.nics@intel.com> * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 */ #ifndef _E1000E_80003ES2LAN_H_ #define _E1000E_80003ES2LAN_H_ #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 #define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02 #define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10 #define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F #define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008 #define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800 #define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010 #define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004 #define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 #define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000 #define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C #define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004 #define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gig Carry Extend Padding */ #define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 #define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8 #define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9 /* GG82563 PHY Specific Status Register (Page 0, Register 16 */ #define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Dis */ #define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 #define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */ #define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */ #define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */ /* PHY Specific Control Register 2 (Page 0, Register 26) */ #define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Neg */ /* MAC Specific Control Register (Page 2, Register 21) */ /* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ #define GG82563_MSCR_TX_CLK_MASK 0x0007 #define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004 #define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005 #define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007 #define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ /* DSP Distance Register (Page 5, Register 26) * 0 = <50M * 1 = 50-80M * 2 = 80-100M * 3 = 110-140M * 4 = >140M */ #define GG82563_DSPD_CABLE_LENGTH 0x0007 /* Kumeran Mode Control Register (Page 193, Register 16) */ #define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 /* Max number of times Kumeran read/write should be validated */ #define GG82563_MAX_KMRN_RETRY 0x5 /* Power Management Control Register (Page 193, Register 20) */ /* 1=Enable SERDES Electrical Idle */ #define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 /* In-Band Control Register (Page 194, Register 18) */ #define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ #endif |