menuconfig [31mCONFIG_NVMEM[0m
tristate "NVMEM Support"
help
Support for [31mCONFIG_NVMEM[0m(Non Volatile Memory) devices like EEPROM, EFUSES...
This framework is designed to provide a generic interface to [31mCONFIG_NVMEM[0m
from both the Linux Kernel and the userspace.
This driver can also be built as a module. If so, the module
will be called nvmem_core.
If unsure, say no.
if [31mCONFIG_NVMEM[0m
config [31mCONFIG_NVMEM_IMX_OCOTP[0m
tristate "i.MX6 On-Chip OTP Controller support"
depends on [31mCONFIG_SOC_IMX6[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
help
This is a driver for the On-Chip OTP Controller (OCOTP) available on
i.MX6 SoCs, providing access to 4 Kbits of one-time programmable
eFuses.
This driver can also be built as a module. If so, the module
will be called nvmem-imx-ocotp.
config [31mCONFIG_NVMEM_LPC18XX_EEPROM[0m
tristate "NXP LPC18XX EEPROM Memory Support"
depends on [31mCONFIG_ARCH_LPC18XX[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
help
Say Y here to include support for NXP LPC18xx EEPROM memory found in
NXP LPC185x/3x and LPC435x/3x/2x/1x devices.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called nvmem_lpc18xx_eeprom.
config [31mCONFIG_NVMEM_LPC18XX_OTP[0m
tristate "NXP LPC18XX OTP Memory Support"
depends on [31mCONFIG_ARCH_LPC18XX[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
help
Say Y here to include support for NXP LPC18xx OTP memory found on
all LPC18xx and LPC43xx devices.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called nvmem_lpc18xx_otp.
config [31mCONFIG_NVMEM_MXS_OCOTP[0m
tristate "Freescale MXS On-Chip OTP Memory Support"
depends on [31mCONFIG_ARCH_MXS[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
help
If you say Y here, you will get readonly access to the
One Time Programmable memory pages that are stored
on the Freescale i.MX23/i.MX28 processor.
This driver can also be built as a module. If so, the module
will be called nvmem-mxs-ocotp.
config [31mCONFIG_MTK_EFUSE[0m
tristate "Mediatek SoCs EFUSE support"
depends on [31mCONFIG_ARCH_MEDIATEK[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
help
This is a driver to access hardware related data like sensor
calibration, [31mCONFIG_HDMI[0m impedance etc.
This driver can also be built as a module. If so, the module
will be called efuse-mtk.
config [31mCONFIG_QCOM_QFPROM[0m
tristate "QCOM QFPROM Support"
depends on [31mCONFIG_ARCH_QCOM[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
help
Say y here to enable QFPROM support. The QFPROM provides access
functions for QFPROM data to rest of the drivers via nvmem interface.
This driver can also be built as a module. If so, the module
will be called nvmem_qfprom.
config [31mCONFIG_ROCKCHIP_EFUSE[0m
tristate "Rockchip eFuse Support"
depends on [31mCONFIG_ARCH_ROCKCHIP[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
help
This is a simple drive to dump specified values of Rockchip SoC
from eFuse, such as cpu-leakage.
This driver can also be built as a module. If so, the module
will be called nvmem_rockchip_efuse.
config [31mCONFIG_NVMEM_BCM_OCOTP[0m
tristate "Broadcom On-Chip OTP Controller support"
depends on [31mCONFIG_ARCH_BCM_IPROC[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
default [31mCONFIG_ARCH_BCM_IPROC[0m
help
Say y here to enable read/write access to the Broadcom OTP
controller.
This driver can also be built as a module. If so, the module
will be called nvmem-bcm-ocotp.
config [31mCONFIG_NVMEM_SUNXI_SID[0m
tristate "Allwinner SoCs SID support"
depends on [31mCONFIG_ARCH_SUNXI[0m
help
This is a driver for the 'security ID' available on various Allwinner
devices.
This driver can also be built as a module. If so, the module
will be called nvmem_sunxi_sid.
config [31mCONFIG_NVMEM_VF610_OCOTP[0m
tristate "VF610 SoC OCOTP support"
depends on [31mCONFIG_SOC_VF610[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_HAS_IOMEM[0m
help
This is a driver for the 'OCOTP' peripheral available on Vybrid
devices like VF5xx and VF6xx.
This driver can also be build as a module. If so, the module will
be called nvmem-vf610-ocotp.
config [31mCONFIG_MESON_EFUSE[0m
tristate "Amlogic eFuse Support"
depends on ([31mCONFIG_ARCH_MESON[0m || [31mCONFIG_COMPILE_TEST[0m) && [31mCONFIG_MESON_SM[0m
help
This is a driver to retrieve specific values from the eFuse found on
the Amlogic Meson SoCs.
This driver can also be built as a module. If so, the module
will be called nvmem_meson_efuse.
endif