Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
/*
 * Copyright 2003 Digi International (www.digi.com)
 *	Scott H Kilau <Scott_Kilau at digi dot com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
 * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
 * PURPOSE.  See the GNU General Public License for more details.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include "dgnc_driver.h"
#include "dgnc_pci.h"
#include "dgnc_mgmt.h"
#include "dgnc_tty.h"
#include "dgnc_cls.h"
#include "dgnc_neo.h"

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Digi International, http://www.digi.com");
MODULE_DESCRIPTION("Driver for the Digi International Neo and Classic PCI based product line");
MODULE_SUPPORTED_DEVICE("dgnc");

/* File operations permitted on Control/Management major. */

static const struct file_operations dgnc_board_fops = {
	.owner		=	THIS_MODULE,
	.unlocked_ioctl =	dgnc_mgmt_ioctl,
	.open		=	dgnc_mgmt_open,
	.release	=	dgnc_mgmt_close
};

/* Globals */

uint			dgnc_num_boards;
struct dgnc_board		*dgnc_board[MAXBOARDS];
DEFINE_SPINLOCK(dgnc_global_lock);
DEFINE_SPINLOCK(dgnc_poll_lock); /* Poll scheduling lock */
uint			dgnc_major;
int			dgnc_poll_tick = 20;	/* Poll interval - 20 ms */

/* Static vars. */

static struct class *dgnc_class;

/* Poller stuff */

static ulong		dgnc_poll_time; /* Time of next poll */
static uint		dgnc_poll_stop; /* Used to tell poller to stop */
static struct timer_list dgnc_poll_timer;

static const struct pci_device_id dgnc_pci_tbl[] = {
	{PCI_DEVICE(DIGI_VID, PCI_DEVICE_CLASSIC_4_DID),     .driver_data = 0},
	{PCI_DEVICE(DIGI_VID, PCI_DEVICE_CLASSIC_4_422_DID), .driver_data = 1},
	{PCI_DEVICE(DIGI_VID, PCI_DEVICE_CLASSIC_8_DID),     .driver_data = 2},
	{PCI_DEVICE(DIGI_VID, PCI_DEVICE_CLASSIC_8_422_DID), .driver_data = 3},
	{0,}
};
MODULE_DEVICE_TABLE(pci, dgnc_pci_tbl);

struct board_id {
	unsigned char *name;
	uint maxports;
	unsigned int is_pci_express;
};

static const struct board_id dgnc_ids[] = {
	{	PCI_DEVICE_CLASSIC_4_PCI_NAME,		4,	0	},
	{	PCI_DEVICE_CLASSIC_4_422_PCI_NAME,	4,	0	},
	{	PCI_DEVICE_CLASSIC_8_PCI_NAME,		8,	0	},
	{	PCI_DEVICE_CLASSIC_8_422_PCI_NAME,	8,	0	},
	{	PCI_DEVICE_NEO_4_PCI_NAME,		4,	0	},
	{	PCI_DEVICE_NEO_8_PCI_NAME,		8,	0	},
	{	PCI_DEVICE_NEO_2DB9_PCI_NAME,		2,	0	},
	{	PCI_DEVICE_NEO_2DB9PRI_PCI_NAME,	2,	0	},
	{	PCI_DEVICE_NEO_2RJ45_PCI_NAME,		2,	0	},
	{	PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME,	2,	0	},
	{	PCI_DEVICE_NEO_1_422_PCI_NAME,		1,	0	},
	{	PCI_DEVICE_NEO_1_422_485_PCI_NAME,	1,	0	},
	{	PCI_DEVICE_NEO_2_422_485_PCI_NAME,	2,	0	},
	{	PCI_DEVICE_NEO_EXPRESS_8_PCI_NAME,	8,	1	},
	{	PCI_DEVICE_NEO_EXPRESS_4_PCI_NAME,	4,	1	},
	{	PCI_DEVICE_NEO_EXPRESS_4RJ45_PCI_NAME,	4,	1	},
	{	PCI_DEVICE_NEO_EXPRESS_8RJ45_PCI_NAME,	8,	1	},
	{	NULL,					0,	0	}
};

/* Remap PCI memory. */

static int dgnc_do_remap(struct dgnc_board *brd)
{
	int rc = 0;

	brd->re_map_membase = ioremap(brd->membase, 0x1000);
	if (!brd->re_map_membase)
		rc = -ENOMEM;

	return rc;
}

/*
 * dgnc_found_board()
 *
 * A board has been found, init it.
 */
static struct dgnc_board *dgnc_found_board(struct pci_dev *pdev, int id)
{
	struct dgnc_board *brd;
	unsigned int pci_irq;
	int i = 0;
	int rc = 0;

	/* get the board structure and prep it */
	brd = kzalloc(sizeof(*brd), GFP_KERNEL);
	if (!brd)
		return ERR_PTR(-ENOMEM);

	/* store the info for the board we've found */
	brd->magic = DGNC_BOARD_MAGIC;
	brd->boardnum = dgnc_num_boards;
	brd->vendor = dgnc_pci_tbl[id].vendor;
	brd->device = dgnc_pci_tbl[id].device;
	brd->pdev = pdev;
	brd->pci_bus = pdev->bus->number;
	brd->pci_slot = PCI_SLOT(pdev->devfn);
	brd->name = dgnc_ids[id].name;
	brd->maxports = dgnc_ids[id].maxports;
	if (dgnc_ids[i].is_pci_express)
		brd->bd_flags |= BD_IS_PCI_EXPRESS;
	brd->dpastatus = BD_NOFEP;
	init_waitqueue_head(&brd->state_wait);

	spin_lock_init(&brd->bd_lock);
	spin_lock_init(&brd->bd_intr_lock);

	brd->state		= BOARD_FOUND;

	/* store which card & revision we have */
	pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &brd->subvendor);
	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &brd->subdevice);
	pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);

	pci_irq = pdev->irq;
	brd->irq = pci_irq;

	switch (brd->device) {
	case PCI_DEVICE_CLASSIC_4_DID:
	case PCI_DEVICE_CLASSIC_8_DID:
	case PCI_DEVICE_CLASSIC_4_422_DID:
	case PCI_DEVICE_CLASSIC_8_422_DID:

		brd->dpatype = T_CLASSIC | T_PCIBUS;

		/*
		 * For PCI ClassicBoards
		 * PCI Local Address (i.e. "resource" number) space
		 * 0	PLX Memory Mapped Config
		 * 1	PLX I/O Mapped Config
		 * 2	I/O Mapped UARTs and Status
		 * 3	Memory Mapped VPD
		 * 4	Memory Mapped UARTs and Status
		 */

		/* get the PCI Base Address Registers */
		brd->membase = pci_resource_start(pdev, 4);

		if (!brd->membase) {
			dev_err(&brd->pdev->dev,
				"Card has no PCI IO resources, failing.\n");
			rc = -ENODEV;
			goto failed;
		}

		brd->membase_end = pci_resource_end(pdev, 4);

		if (brd->membase & 1)
			brd->membase &= ~3;
		else
			brd->membase &= ~15;

		brd->iobase	= pci_resource_start(pdev, 1);
		brd->iobase_end = pci_resource_end(pdev, 1);
		brd->iobase	= ((unsigned int)(brd->iobase)) & 0xFFFE;

		/* Assign the board_ops struct */
		brd->bd_ops = &dgnc_cls_ops;

		brd->bd_uart_offset = 0x8;
		brd->bd_dividend = 921600;

		rc = dgnc_do_remap(brd);

		if (rc < 0)
			goto failed;

		/* Get and store the board VPD, if it exists */
		brd->bd_ops->vpd(brd);

		/*
		 * Enable Local Interrupt 1		  (0x1),
		 * Local Interrupt 1 Polarity Active high (0x2),
		 * Enable PCI interrupt			  (0x40)
		 */
		outb(0x43, brd->iobase + 0x4c);

		break;

	case PCI_DEVICE_NEO_4_DID:
	case PCI_DEVICE_NEO_8_DID:
	case PCI_DEVICE_NEO_2DB9_DID:
	case PCI_DEVICE_NEO_2DB9PRI_DID:
	case PCI_DEVICE_NEO_2RJ45_DID:
	case PCI_DEVICE_NEO_2RJ45PRI_DID:
	case PCI_DEVICE_NEO_1_422_DID:
	case PCI_DEVICE_NEO_1_422_485_DID:
	case PCI_DEVICE_NEO_2_422_485_DID:
	case PCI_DEVICE_NEO_EXPRESS_8_DID:
	case PCI_DEVICE_NEO_EXPRESS_4_DID:
	case PCI_DEVICE_NEO_EXPRESS_4RJ45_DID:
	case PCI_DEVICE_NEO_EXPRESS_8RJ45_DID:

		/*
		 * This chip is set up 100% when we get to it.
		 * No need to enable global interrupts or anything.
		 */
		if (brd->bd_flags & BD_IS_PCI_EXPRESS)
			brd->dpatype = T_NEO_EXPRESS | T_PCIBUS;
		else
			brd->dpatype = T_NEO | T_PCIBUS;

		/* get the PCI Base Address Registers */
		brd->membase     = pci_resource_start(pdev, 0);
		brd->membase_end = pci_resource_end(pdev, 0);

		if (brd->membase & 1)
			brd->membase &= ~3;
		else
			brd->membase &= ~15;

		/* Assign the board_ops struct */
		brd->bd_ops = &dgnc_neo_ops;

		brd->bd_uart_offset = 0x200;
		brd->bd_dividend = 921600;

		rc = dgnc_do_remap(brd);

		if (rc < 0)
			goto failed;

		/* Read and store the dvid after remapping */
		brd->dvid = readb(brd->re_map_membase + 0x8D);

		/* Get and store the board VPD, if it exists */
		brd->bd_ops->vpd(brd);

		break;

	default:
		dev_err(&brd->pdev->dev,
			"Didn't find any compatible Neo/Classic PCI boards.\n");
		rc = -ENXIO;
		goto failed;
	}

	/* init our poll helper tasklet */
	tasklet_init(&brd->helper_tasklet,
		     brd->bd_ops->tasklet,
		     (unsigned long)brd);

	wake_up_interruptible(&brd->state_wait);

	return brd;

failed:
	kfree(brd);

	return ERR_PTR(rc);
}

static int dgnc_request_irq(struct dgnc_board *brd)
{
	int rc = 0;

	if (brd->irq) {
		rc = request_irq(brd->irq, brd->bd_ops->intr,
				 IRQF_SHARED, "DGNC", brd);

		if (rc) {
			dev_err(&brd->pdev->dev,
				"Failed to hook IRQ %d\n", brd->irq);
			brd->state = BOARD_FAILED;
			brd->dpastatus = BD_NOFEP;
			rc = -ENODEV;
		}
	}
	return rc;
}

static void dgnc_free_irq(struct dgnc_board *brd)
{
	if (brd->irq)
		free_irq(brd->irq, brd);
}

/*
 * Function:
 *
 *    dgnc_poll_handler
 *
 * Author:
 *
 *    Scott H Kilau
 *
 * Parameters:
 *
 *    dummy -- ignored
 *
 * Return Values:
 *
 *    none
 *
 * Description:
 *
 *    As each timer expires, it determines (a) whether the "transmit"
 *    waiter needs to be woken up, and (b) whether the poller needs to
 *    be rescheduled.
 */

static void dgnc_poll_handler(ulong dummy)
{
	struct dgnc_board *brd;
	unsigned long flags;
	int i;
	unsigned long new_time;

	/* Go thru each board, kicking off a tasklet for each if needed */
	for (i = 0; i < dgnc_num_boards; i++) {
		brd = dgnc_board[i];

		spin_lock_irqsave(&brd->bd_lock, flags);

		/* If board is in a failed state don't schedule a tasklet */
		if (brd->state == BOARD_FAILED) {
			spin_unlock_irqrestore(&brd->bd_lock, flags);
			continue;
		}

		/* Schedule a poll helper task */
		tasklet_schedule(&brd->helper_tasklet);

		spin_unlock_irqrestore(&brd->bd_lock, flags);
	}

	/* Schedule ourself back at the nominal wakeup interval. */

	spin_lock_irqsave(&dgnc_poll_lock, flags);
	dgnc_poll_time += dgnc_jiffies_from_ms(dgnc_poll_tick);

	new_time = dgnc_poll_time - jiffies;

	if ((ulong)new_time >= 2 * dgnc_poll_tick)
		dgnc_poll_time = jiffies + dgnc_jiffies_from_ms(dgnc_poll_tick);

	setup_timer(&dgnc_poll_timer, dgnc_poll_handler, 0);
	dgnc_poll_timer.expires = dgnc_poll_time;
	spin_unlock_irqrestore(&dgnc_poll_lock, flags);

	if (!dgnc_poll_stop)
		add_timer(&dgnc_poll_timer);
}

/* returns count (>= 0), or negative on error */
static int dgnc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
	int rc;
	struct dgnc_board *brd;

	/* wake up and enable device */
	rc = pci_enable_device(pdev);

	if (rc)
		return -EIO;

	brd = dgnc_found_board(pdev, ent->driver_data);
	if (IS_ERR(brd))
		return PTR_ERR(brd);

	/* Do tty device initialization. */

	rc = dgnc_tty_register(brd);
	if (rc < 0) {
		pr_err(DRVSTR ": Can't register tty devices (%d)\n", rc);
		goto failed;
	}

	rc = dgnc_request_irq(brd);
	if (rc < 0) {
		pr_err(DRVSTR ": Can't finalize board init (%d)\n", rc);
		goto unregister_tty;
	}

	rc = dgnc_tty_init(brd);
	if (rc < 0) {
		pr_err(DRVSTR ": Can't init tty devices (%d)\n", rc);
		goto free_irq;
	}

	brd->state = BOARD_READY;
	brd->dpastatus = BD_RUNNING;

	dgnc_board[dgnc_num_boards++] = brd;

	return 0;

free_irq:
	dgnc_free_irq(brd);
unregister_tty:
	dgnc_tty_unregister(brd);

failed:
	kfree(brd);

	return rc;
}

static struct pci_driver dgnc_driver = {
	.name		= "dgnc",
	.probe		= dgnc_init_one,
	.id_table       = dgnc_pci_tbl,
};

/* Start of driver. */

static int dgnc_start(void)
{
	int rc = 0;
	unsigned long flags;
	struct device *dev;

	/* make sure timer is initialized before we do anything else */
	init_timer(&dgnc_poll_timer);

	/*
	 * Register our base character device into the kernel.
	 * This allows the download daemon to connect to the downld device
	 * before any of the boards are init'ed.
	 *
	 * Register management/dpa devices
	 */
	rc = register_chrdev(0, "dgnc", &dgnc_board_fops);
	if (rc < 0) {
		pr_err(DRVSTR ": Can't register dgnc driver device (%d)\n", rc);
		return rc;
	}
	dgnc_major = rc;

	dgnc_class = class_create(THIS_MODULE, "dgnc_mgmt");
	if (IS_ERR(dgnc_class)) {
		rc = PTR_ERR(dgnc_class);
		pr_err(DRVSTR ": Can't create dgnc_mgmt class (%d)\n", rc);
		goto failed_class;
	}

	dev = device_create(dgnc_class, NULL,
			    MKDEV(dgnc_major, 0),
			NULL, "dgnc_mgmt");
	if (IS_ERR(dev)) {
		rc = PTR_ERR(dev);
		pr_err(DRVSTR ": Can't create device (%d)\n", rc);
		goto failed_device;
	}

	/* Start the poller */
	spin_lock_irqsave(&dgnc_poll_lock, flags);
	setup_timer(&dgnc_poll_timer, dgnc_poll_handler, 0);
	dgnc_poll_time = jiffies + dgnc_jiffies_from_ms(dgnc_poll_tick);
	dgnc_poll_timer.expires = dgnc_poll_time;
	spin_unlock_irqrestore(&dgnc_poll_lock, flags);

	add_timer(&dgnc_poll_timer);

	return 0;

failed_device:
	class_destroy(dgnc_class);
failed_class:
	unregister_chrdev(dgnc_major, "dgnc");
	return rc;
}

/*
 * dgnc_cleanup_board()
 *
 * Free all the memory associated with a board
 */
static void dgnc_cleanup_board(struct dgnc_board *brd)
{
	int i = 0;

	if (!brd || brd->magic != DGNC_BOARD_MAGIC)
		return;

	switch (brd->device) {
	case PCI_DEVICE_CLASSIC_4_DID:
	case PCI_DEVICE_CLASSIC_8_DID:
	case PCI_DEVICE_CLASSIC_4_422_DID:
	case PCI_DEVICE_CLASSIC_8_422_DID:

		/* Tell card not to interrupt anymore. */
		outb(0, brd->iobase + 0x4c);
		break;

	default:
		break;
	}

	if (brd->irq)
		free_irq(brd->irq, brd);

	tasklet_kill(&brd->helper_tasklet);

	if (brd->re_map_membase) {
		iounmap(brd->re_map_membase);
		brd->re_map_membase = NULL;
	}

	/* Free all allocated channels structs */
	for (i = 0; i < MAXPORTS ; i++) {
		if (brd->channels[i]) {
			kfree(brd->channels[i]->ch_rqueue);
			kfree(brd->channels[i]->ch_equeue);
			kfree(brd->channels[i]->ch_wqueue);
			kfree(brd->channels[i]);
			brd->channels[i] = NULL;
		}
	}

	dgnc_board[brd->boardnum] = NULL;

	kfree(brd);
}

/* Driver load/unload functions */

static void cleanup(void)
{
	int i;
	unsigned long flags;

	spin_lock_irqsave(&dgnc_poll_lock, flags);
	dgnc_poll_stop = 1;
	spin_unlock_irqrestore(&dgnc_poll_lock, flags);

	/* Turn off poller right away. */
	del_timer_sync(&dgnc_poll_timer);

	device_destroy(dgnc_class, MKDEV(dgnc_major, 0));
	class_destroy(dgnc_class);
	unregister_chrdev(dgnc_major, "dgnc");

	for (i = 0; i < dgnc_num_boards; ++i) {
		dgnc_cleanup_tty(dgnc_board[i]);
		dgnc_cleanup_board(dgnc_board[i]);
	}
}

/*
 * dgnc_cleanup_module()
 *
 * Module unload.  This is where it all ends.
 */
static void __exit dgnc_cleanup_module(void)
{
	cleanup();
	pci_unregister_driver(&dgnc_driver);
}

/*
 * init_module()
 *
 * Module load.  This is where it all starts.
 */
static int __init dgnc_init_module(void)
{
	int rc;

	/* Initialize global stuff */

	rc = dgnc_start();

	if (rc < 0)
		return rc;

	/* Find and configure all the cards */

	rc = pci_register_driver(&dgnc_driver);
	if (rc) {
		pr_warn("WARNING: dgnc driver load failed.  No Digi Neo or Classic boards found.\n");
		cleanup();
		return rc;
	}

	return 0;
}

module_init(dgnc_init_module);
module_exit(dgnc_cleanup_module);