Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
/*
 * FB driver for Two KS0108 LCD controllers in AGM1264K-FL display
 *
 * Copyright (C) 2014 ololoshka2871
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/slab.h>

#include "fbtft.h"

/* Uncomment text line to use negative image on display */
/*#define NEGATIVE*/

#define WHITE		0xff
#define BLACK		0

#define DRVNAME		"fb_agm1264k-fl"
#define WIDTH		64
#define HEIGHT		64
#define TOTALWIDTH	(WIDTH * 2)	 /* because 2 x ks0108 in one display */
#define FPS			20

#define EPIN		gpio.wr
#define RS			gpio.dc
#define RW			gpio.aux[2]
#define CS0			gpio.aux[0]
#define CS1			gpio.aux[1]

/* diffusing error (Floyd-Steinberg) */
#define DIFFUSING_MATRIX_WIDTH	2
#define DIFFUSING_MATRIX_HEIGHT	2

static const signed char
diffusing_matrix[DIFFUSING_MATRIX_WIDTH][DIFFUSING_MATRIX_HEIGHT] = {
	{-1, 3},
	{3, 2},
};

static const unsigned char gamma_correction_table[] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 6,
6, 6, 6, 7, 7, 7, 8, 8, 8, 9, 9, 9, 10, 10, 11, 11, 11, 12, 12, 13,
13, 13, 14, 14, 15, 15, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21,
22, 22, 23, 23, 24, 25, 25, 26, 26, 27, 28, 28, 29, 30, 30, 31, 32,
33, 33, 34, 35, 35, 36, 37, 38, 39, 39, 40, 41, 42, 43, 43, 44, 45,
46, 47, 48, 49, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61,
62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 73, 74, 75, 76, 77, 78, 79, 81,
82, 83, 84, 85, 87, 88, 89, 90, 91, 93, 94, 95, 97, 98, 99, 100, 102,
103, 105, 106, 107, 109, 110, 111, 113, 114, 116, 117, 119, 120, 121,
123, 124, 126, 127, 129, 130, 132, 133, 135, 137, 138, 140, 141, 143,
145, 146, 148, 149, 151, 153, 154, 156, 158, 159, 161, 163, 165, 166,
168, 170, 172, 173, 175, 177, 179, 181, 182, 184, 186, 188, 190, 192,
194, 196, 197, 199, 201, 203, 205, 207, 209, 211, 213, 215, 217, 219,
221, 223, 225, 227, 229, 231, 234, 236, 238, 240, 242, 244, 246, 248,
251, 253, 255
};

static int init_display(struct fbtft_par *par)
{
	u8 i;

	par->fbtftops.reset(par);

	for (i = 0; i < 2; ++i) {
		write_reg(par, i, 0x3f); /* display on */
		write_reg(par, i, 0x40); /* set x to 0 */
		write_reg(par, i, 0xb0); /* set page to 0 */
		write_reg(par, i, 0xc0); /* set start line to 0 */
	}

	return 0;
}

static void reset(struct fbtft_par *par)
{
	if (par->gpio.reset == -1)
		return;

	dev_dbg(par->info->device, "%s()\n", __func__);

	gpio_set_value(par->gpio.reset, 0);
	udelay(20);
	gpio_set_value(par->gpio.reset, 1);
	mdelay(120);
}

/* Check if all necessary GPIOS defined */
static int verify_gpios(struct fbtft_par *par)
{
	int i;

	dev_dbg(par->info->device,
		"%s()\n", __func__);

	if (par->EPIN < 0) {
		dev_err(par->info->device,
			"Missing info about 'wr' (aka E) gpio. Aborting.\n");
		return -EINVAL;
	}
	for (i = 0; i < 8; ++i) {
		if (par->gpio.db[i] < 0) {
			dev_err(par->info->device,
				"Missing info about 'db[%i]' gpio. Aborting.\n",
				i);
			return -EINVAL;
		}
	}
	if (par->CS0 < 0) {
		dev_err(par->info->device,
			"Missing info about 'cs0' gpio. Aborting.\n");
		return -EINVAL;
	}
	if (par->CS1 < 0) {
		dev_err(par->info->device,
			"Missing info about 'cs1' gpio. Aborting.\n");
		return -EINVAL;
	}
	if (par->RW < 0) {
		dev_err(par->info->device,
			"Missing info about 'rw' gpio. Aborting.\n");
		return -EINVAL;
	}

	return 0;
}

static unsigned long
request_gpios_match(struct fbtft_par *par, const struct fbtft_gpio *gpio)
{
	dev_dbg(par->info->device,
		"%s('%s')\n", __func__, gpio->name);

	if (strcasecmp(gpio->name, "wr") == 0) {
		/* left ks0108 E pin */
		par->EPIN = gpio->gpio;
		return GPIOF_OUT_INIT_LOW;
	} else if (strcasecmp(gpio->name, "cs0") == 0) {
		/* left ks0108 controller pin */
		par->CS0 = gpio->gpio;
		return GPIOF_OUT_INIT_HIGH;
	} else if (strcasecmp(gpio->name, "cs1") == 0) {
		/* right ks0108 controller pin */
		par->CS1 = gpio->gpio;
		return GPIOF_OUT_INIT_HIGH;
	}

	/* if write (rw = 0) e(1->0) perform write */
	/* if read (rw = 1) e(0->1) set data on D0-7*/
	else if (strcasecmp(gpio->name, "rw") == 0) {
		par->RW = gpio->gpio;
		return GPIOF_OUT_INIT_LOW;
	}

	return FBTFT_GPIO_NO_MATCH;
}

/* This function oses to enter commands
 * first byte - destination controller 0 or 1
 * following - commands
 */
static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
{
	va_list args;
	int i, ret;
	u8 *buf = par->buf;

	if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) {
		va_start(args, len);
		for (i = 0; i < len; i++)
			buf[i] = (u8)va_arg(args, unsigned int);

		va_end(args);
		fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par,
			par->info->device, u8, buf, len, "%s: ", __func__);
	}

	va_start(args, len);

	*buf = (u8)va_arg(args, unsigned int);

	if (*buf > 1) {
		va_end(args);
		dev_err(par->info->device,
			"Incorrect chip select request (%d)\n", *buf);
		return;
	}

	/* select chip */
	if (*buf) {
		/* cs1 */
		gpio_set_value(par->CS0, 1);
		gpio_set_value(par->CS1, 0);
	} else {
		/* cs0 */
		gpio_set_value(par->CS0, 0);
		gpio_set_value(par->CS1, 1);
	}

	gpio_set_value(par->RS, 0); /* RS->0 (command mode) */
	len--;

	if (len) {
		i = len;
		while (i--)
			*buf++ = (u8)va_arg(args, unsigned int);
		ret = par->fbtftops.write(par, par->buf, len * (sizeof(u8)));
		if (ret < 0) {
			va_end(args);
			dev_err(par->info->device,
				"write() failed and returned %d\n", ret);
			return;
		}
	}

	va_end(args);
}

static struct
{
	int xs, ys_page, xe, ye_page;
} addr_win;

/* save display writing zone */
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
	addr_win.xs = xs;
	addr_win.ys_page = ys / 8;
	addr_win.xe = xe;
	addr_win.ye_page = ye / 8;
}

static void
construct_line_bitmap(struct fbtft_par *par, u8 *dest, signed short *src,
						int xs, int xe, int y)
{
	int x, i;

	for (x = xs; x < xe; ++x) {
		u8 res = 0;

		for (i = 0; i < 8; i++)
			if (src[(y * 8 + i) * par->info->var.xres + x])
				res |= 1 << i;
#ifdef NEGATIVE
		*dest++ = res;
#else
		*dest++ = ~res;
#endif
	}
}

static void iterate_diffusion_matrix(u32 xres, u32 yres, int x,
				     int y, signed short *convert_buf,
				     signed short pixel, signed short error)
{
	u16 i, j;

	/* diffusion matrix row */
	for (i = 0; i < DIFFUSING_MATRIX_WIDTH; ++i)
		/* diffusion matrix column */
		for (j = 0; j < DIFFUSING_MATRIX_HEIGHT; ++j) {
			signed short *write_pos;
			signed char coeff;

			/* skip pixels out of zone */
			if (x + i < 0 || x + i >= xres || y + j >= yres)
				continue;
			write_pos = &convert_buf[(y + j) * xres + x + i];
			coeff = diffusing_matrix[i][j];
			if (-1 == coeff)
				/* pixel itself */
				*write_pos = pixel;
			else {
				signed short p = *write_pos + error * coeff;

				if (p > WHITE)
					p = WHITE;
				if (p < BLACK)
					p = BLACK;
				*write_pos = p;
			}
		}
}

static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
{
	u16 *vmem16 = (u16 *)par->info->screen_buffer;
	u8 *buf = par->txbuf.buf;
	int x, y;
	int ret = 0;

	/* buffer to convert RGB565 -> grayscale16 -> Dithered image 1bpp */
	signed short *convert_buf = kmalloc_array(par->info->var.xres *
		par->info->var.yres, sizeof(signed short), GFP_NOIO);

	if (!convert_buf)
		return -ENOMEM;

	/* converting to grayscale16 */
	for (x = 0; x < par->info->var.xres; ++x)
		for (y = 0; y < par->info->var.yres; ++y) {
			u16 pixel = vmem16[y *  par->info->var.xres + x];
			u16 b = pixel & 0x1f;
			u16 g = (pixel & (0x3f << 5)) >> 5;
			u16 r = (pixel & (0x1f << (5 + 6))) >> (5 + 6);

			pixel = (299 * r + 587 * g + 114 * b) / 200;
			if (pixel > 255)
				pixel = 255;

			/* gamma-correction by table */
			convert_buf[y *  par->info->var.xres + x] =
				(signed short)gamma_correction_table[pixel];
		}

	/* Image Dithering */
	for (x = 0; x < par->info->var.xres; ++x)
		for (y = 0; y < par->info->var.yres; ++y) {
			signed short pixel =
				convert_buf[y *  par->info->var.xres + x];
			signed short error_b = pixel - BLACK;
			signed short error_w = pixel - WHITE;
			signed short error;

			/* what color close? */
			if (abs(error_b) >= abs(error_w)) {
				/* white */
				error = error_w;
				pixel = 0xff;
			} else {
				/* black */
				error = error_b;
				pixel = 0;
			}

			error /= 8;

			iterate_diffusion_matrix(par->info->var.xres,
						 par->info->var.yres,
						 x, y, convert_buf,
						 pixel, error);
		}

	/* 1 string = 2 pages */
	for (y = addr_win.ys_page; y <= addr_win.ye_page; ++y) {
		/* left half of display */
		if (addr_win.xs < par->info->var.xres / 2) {
			construct_line_bitmap(par, buf, convert_buf,
				addr_win.xs, par->info->var.xres / 2, y);

			len = par->info->var.xres / 2 - addr_win.xs;

			/* select left side (sc0)
			 * set addr
			 */
			write_reg(par, 0x00, (1 << 6) | (u8)addr_win.xs);
			write_reg(par, 0x00, (0x17 << 3) | (u8)y);

			/* write bitmap */
			gpio_set_value(par->RS, 1); /* RS->1 (data mode) */
			ret = par->fbtftops.write(par, buf, len);
			if (ret < 0)
				dev_err(par->info->device,
					"write failed and returned: %d\n",
					ret);
		}
		/* right half of display */
		if (addr_win.xe >= par->info->var.xres / 2) {
			construct_line_bitmap(par, buf,
				convert_buf, par->info->var.xres / 2,
				addr_win.xe + 1, y);

			len = addr_win.xe + 1 - par->info->var.xres / 2;

			/* select right side (sc1)
			 * set addr
			 */
			write_reg(par, 0x01, 1 << 6);
			write_reg(par, 0x01, (0x17 << 3) | (u8)y);

			/* write bitmap */
			gpio_set_value(par->RS, 1); /* RS->1 (data mode) */
			par->fbtftops.write(par, buf, len);
			if (ret < 0)
				dev_err(par->info->device,
					"write failed and returned: %d\n",
					ret);
		}
	}
	kfree(convert_buf);

	gpio_set_value(par->CS0, 1);
	gpio_set_value(par->CS1, 1);

	return ret;
}

static int write(struct fbtft_par *par, void *buf, size_t len)
{
	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
		"%s(len=%d): ", __func__, len);

	gpio_set_value(par->RW, 0); /* set write mode */

	while (len--) {
		u8 i, data;

		data = *(u8 *)buf++;

		/* set data bus */
		for (i = 0; i < 8; ++i)
			gpio_set_value(par->gpio.db[i], data & (1 << i));
		/* set E */
		gpio_set_value(par->EPIN, 1);
		udelay(5);
		/* unset E - write */
		gpio_set_value(par->EPIN, 0);
		udelay(1);
	}

	return 0;
}

static struct fbtft_display display = {
	.regwidth = 8,
	.width = TOTALWIDTH,
	.height = HEIGHT,
	.fps = FPS,
	.fbtftops = {
		.init_display = init_display,
		.set_addr_win = set_addr_win,
		.verify_gpios = verify_gpios,
		.request_gpios_match = request_gpios_match,
		.reset = reset,
		.write = write,
		.write_register = write_reg8_bus8,
		.write_vmem = write_vmem,
	},
};

FBTFT_REGISTER_DRIVER(DRVNAME, "displaytronic,fb_agm1264k-fl", &display);

MODULE_ALIAS("platform:" DRVNAME);

MODULE_DESCRIPTION("Two KS0108 LCD controllers in AGM1264K-FL display");
MODULE_AUTHOR("ololoshka2871");
MODULE_LICENSE("GPL");