/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
******************************************************************************/
#ifndef __INC_HAL8188EPHYCFG_H__
#define __INC_HAL8188EPHYCFG_H__
/*--------------------------Define Parameters-------------------------------*/
#define LOOP_LIMIT 5
#define MAX_STALL_TIME 50 /* us */
#define AntennaDiversityValue 0x80
#define MAX_TXPWR_IDX_NMODE_92S 63
#define Reset_Cnt_Limit 3
#define IQK_MAC_REG_NUM 4
#define IQK_ADDA_REG_NUM 16
#define IQK_BB_REG_NUM 9
#define HP_THERMAL_NUM 8
#define MAX_AGGR_NUM 0x07
/*--------------------------Define Parameters-------------------------------*/
/*------------------------------Define structure----------------------------*/
enum sw_chnl_cmd_id {
CmdID_End,
CmdID_SetTxPowerLevel,
CmdID_BBRegWrite10,
CmdID_WritePortUlong,
CmdID_WritePortUshort,
CmdID_WritePortUchar,
CmdID_RF_WriteReg,
};
/* 1. Switch channel related */
struct sw_chnl_cmd {
enum sw_chnl_cmd_id CmdID;
u32 Para1;
u32 Para2;
u32 msDelay;
};
enum hw90_block {
HW90_BLOCK_MAC = 0,
HW90_BLOCK_PHY0 = 1,
HW90_BLOCK_PHY1 = 2,
HW90_BLOCK_RF = 3,
HW90_BLOCK_MAXIMUM = 4, /* Never use this */
};
enum rf_radio_path {
RF_PATH_A = 0, /* Radio Path A */
RF_PATH_B = 1, /* Radio Path B */
};
#define MAX_PG_GROUP 13
#define RF_PATH_MAX 2
#define MAX_RF_PATH RF_PATH_MAX
#define MAX_TX_COUNT 4 /* path numbers */
#define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */
#define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8,
*ch9~11, ch12~13, CH 14
* total three groups */
#define CHANNEL_GROUP_MAX_88E 6
enum wireless_mode {
WIRELESS_MODE_UNKNOWN = 0x00,
WIRELESS_MODE_A = BIT(2),
WIRELESS_MODE_B = BIT(0),
WIRELESS_MODE_G = BIT(1),
WIRELESS_MODE_AUTO = BIT(5),
WIRELESS_MODE_N_24G = BIT(3),
WIRELESS_MODE_N_5G = BIT(4),
WIRELESS_MODE_AC = BIT(6)
};
enum phy_rate_tx_offset_area {
RA_OFFSET_LEGACY_OFDM1,
RA_OFFSET_LEGACY_OFDM2,
RA_OFFSET_HT_OFDM1,
RA_OFFSET_HT_OFDM2,
RA_OFFSET_HT_OFDM3,
RA_OFFSET_HT_OFDM4,
RA_OFFSET_HT_CCK,
};
struct bb_reg_def {
u32 rfintfs; /* set software control: */
/* 0x870~0x877[8 bytes] */
u32 rfintfi; /* readback data: */
/* 0x8e0~0x8e7[8 bytes] */
u32 rfintfo; /* output data: */
/* 0x860~0x86f [16 bytes] */
u32 rfintfe; /* output enable: */
/* 0x860~0x86f [16 bytes] */
u32 rf3wireOffset; /* LSSI data: */
/* 0x840~0x84f [16 bytes] */
u32 rfLSSI_Select; /* BB Band Select: */
/* 0x878~0x87f [8 bytes] */
u32 rfTxGainStage; /* Tx gain stage: */
/* 0x80c~0x80f [4 bytes] */
u32 rfHSSIPara1; /* wire parameter control1 : */
/* 0x820~0x823,0x828~0x82b,
* 0x830~0x833, 0x838~0x83b [16 bytes] */
u32 rfHSSIPara2; /* wire parameter control2 : */
/* 0x824~0x827,0x82c~0x82f, 0x834~0x837,
* 0x83c~0x83f [16 bytes] */
u32 rfSwitchControl; /* Tx Rx antenna control : */
/* 0x858~0x85f [16 bytes] */
u32 rfAGCControl1; /* AGC parameter control1 : */
/* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
* 0xc68~0xc6b [16 bytes] */
u32 rfAGCControl2; /* AGC parameter control2 : */
/* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
* 0xc6c~0xc6f [16 bytes] */
u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */
/* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
* 0xc2c~0xc2f [16 bytes] */
u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter,
* Rx DC notch filter : */
/* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
* 0xc28~0xc2b [16 bytes] */
u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */
/* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
* 0xc98~0xc9b [16 bytes] */
u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */
/* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
* 0xc9c~0xc9f [16 bytes] */
u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
/* 0x8a0~0x8af [16 bytes] */
u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for
* Path A and B */
};
/*------------------------------Define structure----------------------------*/
/*------------------------Export global variable----------------------------*/
/*------------------------Export global variable----------------------------*/
/*------------------------Export Marco Definition---------------------------*/
/*------------------------Export Marco Definition---------------------------*/
/*--------------------------Exported Function prototype---------------------*/
/* */
/* BB and RF register read/write */
/* */
/* Read initi reg value for tx power setting. */
void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);
/* BB TX Power R/W */
void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);
/* Call after initialization */
void ChkFwCmdIoDone(struct adapter *adapter);
/* BB/MAC/RF other monitor API */
void PHY_SetRFPathSwitch_8188E(struct adapter *adapter, bool main);
void PHY_SwitchEphyParameter(struct adapter *adapter);
void PHY_EnableHostClkReq(struct adapter *adapter);
bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);
/*--------------------------Exported Function prototype---------------------*/
#define PHY_SetMacReg PHY_SetBBReg
#define SIC_HW_SUPPORT 0
#define SIC_MAX_POLL_CNT 5
#define SIC_CMD_READY 0
#define SIC_CMD_WRITE 1
#define SIC_CMD_READ 2
#define SIC_CMD_REG 0x1EB /* 1byte */
#define SIC_ADDR_REG 0x1E8 /* 1b9~1ba, 2 bytes */
#define SIC_DATA_REG 0x1EC /* 1bc~1bf */
#endif /* __INC_HAL8192CPHYCFG_H */