# ALSA [31mCONFIG_ISA[0m drivers
config [31mCONFIG_SND_WSS_LIB[0m
tristate
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_SND_TIMER[0m
config [31mCONFIG_SND_SB_COMMON[0m
tristate
config [31mCONFIG_SND_SB8_DSP[0m
tristate
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_SND_SB_COMMON[0m
config [31mCONFIG_SND_SB16_DSP[0m
tristate
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_SND_SB_COMMON[0m
menuconfig [31mCONFIG_SND_ISA[0m
bool "ISA sound devices"
depends on [31mCONFIG_ISA[0m && [31mCONFIG_ISA_DMA_API[0m
default y
help
Support for sound devices connected via the [31mCONFIG_ISA[0m bus.
if [31mCONFIG_SND_ISA[0m
config [31mCONFIG_SND_ADLIB[0m
tristate "AdLib FM card"
select [31mCONFIG_SND_OPL3_LIB[0m
help
Say Y here to include support for AdLib FM cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-adlib.
config [31mCONFIG_SND_AD1816A[0m
tristate "Analog Devices SoundPort AD1816A"
depends on [31mCONFIG_PNP[0m
select [31mCONFIG_ISAPNP[0m
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_SND_TIMER[0m
help
Say Y here to include support for Analog Devices SoundPort
AD1816A or compatible sound chips.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-ad1816a.
config [31mCONFIG_SND_AD1848[0m
tristate "Generic AD1848/CS4248 driver"
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for AD1848 (Analog Devices) or
CS4248 (Cirrus Logic - Crystal Semiconductors) chips.
For newer chips from Cirrus Logic, use the CS4231 or CS4232+
drivers.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-ad1848.
config [31mCONFIG_SND_ALS100[0m
tristate "Diamond Tech. DT-019x and Avance Logic ALSxxx"
depends on [31mCONFIG_PNP[0m
select [31mCONFIG_ISAPNP[0m
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_SB16_DSP[0m
help
Say Y here to include support for soundcards based on the
Diamond Technologies DT-019X or Avance Logic chips: ALS007,
ALS100, ALS110, ALS120 and ALS200 chips.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-als100.
config [31mCONFIG_SND_AZT1605[0m
tristate "Aztech AZT1605 Driver"
depends on [31mCONFIG_SND[0m
select [31mCONFIG_SND_WSS_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_OPL3_LIB[0m
help
Say Y here to include support for Aztech Sound Galaxy cards
based on the AZT1605 chipset.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-azt1605.
config [31mCONFIG_SND_AZT2316[0m
tristate "Aztech AZT2316 Driver"
depends on [31mCONFIG_SND[0m
select [31mCONFIG_SND_WSS_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_OPL3_LIB[0m
help
Say Y here to include support for Aztech Sound Galaxy cards
based on the AZT2316 chipset.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-azt2316.
config [31mCONFIG_SND_AZT2320[0m
tristate "Aztech Systems AZT2320"
depends on [31mCONFIG_PNP[0m
select [31mCONFIG_ISAPNP[0m
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for soundcards based on the
Aztech Systems AZT2320 chip.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-azt2320.
config [31mCONFIG_SND_CMI8328[0m
tristate "C-Media CMI8328"
select [31mCONFIG_SND_WSS_LIB[0m
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
help
Say Y here to include support for soundcards based on the
[31mCONFIG_C[0m-Media CMI8328 chip.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-cmi8328.
config [31mCONFIG_SND_CMI8330[0m
tristate "C-Media CMI8330"
select [31mCONFIG_SND_WSS_LIB[0m
select [31mCONFIG_SND_SB16_DSP[0m
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
help
Say Y here to include support for soundcards based on the
[31mCONFIG_C[0m-Media CMI8330 chip.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-cmi8330.
config [31mCONFIG_SND_CS4231[0m
tristate "Generic Cirrus Logic CS4231 driver"
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for CS4231 chips from Cirrus
Logic - Crystal Semiconductors.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-cs4231.
config [31mCONFIG_SND_CS4236[0m
tristate "Generic Cirrus Logic CS4232/CS4236+ driver"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y to include support for CS4232,CS4235,CS4236,CS4237B,
CS4238B,CS4239 chips from Cirrus Logic - Crystal
Semiconductors.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-cs4236.
config [31mCONFIG_SND_ES1688[0m
tristate "Generic ESS ES688/ES1688 and ES968 PnP driver"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_PCM[0m
help
Say Y here to include support for ESS AudioDrive ES688 or
ES1688 chips. Also, this module support cards with ES968 PnP chip.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-es1688.
config [31mCONFIG_SND_ES18XX[0m
tristate "Generic ESS ES18xx driver"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_PCM[0m
help
Say Y here to include support for ESS AudioDrive ES18xx chips.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-es18xx.
config [31mCONFIG_SND_SC6000[0m
tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16"
depends on [31mCONFIG_HAS_IOPORT_MAP[0m
select [31mCONFIG_SND_WSS_LIB[0m
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
help
Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000
cards and clones:
Audio Excel DSP 16 and Zoltrix AV302.
These cards are based on CompuMedia ASC-9308 or ASC-9408 chips.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-sc6000.
config [31mCONFIG_SND_GUSCLASSIC[0m
tristate "Gravis UltraSound Classic"
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_SND_TIMER[0m
help
Say Y here to include support for Gravis UltraSound Classic
soundcards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-gusclassic.
config [31mCONFIG_SND_GUSEXTREME[0m
tristate "Gravis UltraSound Extreme"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_SND_TIMER[0m
help
Say Y here to include support for Gravis UltraSound Extreme
soundcards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-gusextreme.
config [31mCONFIG_SND_GUSMAX[0m
tristate "Gravis UltraSound MAX"
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for Gravis UltraSound MAX
soundcards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-gusmax.
config [31mCONFIG_SND_INTERWAVE[0m
tristate "AMD InterWave, Gravis UltraSound PnP"
depends on [31mCONFIG_PNP[0m
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for AMD InterWave based
soundcards (Gravis UltraSound Plug & Play, STB SoundRage32,
MED3210, Dynasonic Pro, Panasonic PCA761AW).
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-interwave.
config [31mCONFIG_SND_INTERWAVE_STB[0m
tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)"
depends on [31mCONFIG_PNP[0m
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for AMD InterWave based
soundcards with a TEA6330T bass and treble regulator
(UltraSound 32-Pro).
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-interwave-stb.
config [31mCONFIG_SND_JAZZ16[0m
tristate "Media Vision Jazz16 card and compatibles"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_SB8_DSP[0m
help
Say Y here to include support for soundcards based on the
Media Vision Jazz16 chipset: digital chip MVD1216 (Jazz16),
codec MVA416 (CS4216) and mixer MVA514 (ICS2514).
Media Vision's Jazz16 cards were sold under names Pro Sonic 16,
Premium 3-[31mCONFIG_D[0m and Pro 3-[31mCONFIG_D[0m. There were also OEMs cards with the
Jazz16 chipset.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-jazz16.
config [31mCONFIG_SND_OPL3SA2[0m
tristate "Yamaha OPL3-SA2/SA3"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for Yamaha OPL3-SA2 and OPL3-SA3
chips.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-opl3sa2.
config [31mCONFIG_SND_OPTI92X_AD1848[0m
tristate "OPTi 82C92x - AD1848"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_OPL4_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for soundcards based on Opti
82C92x or OTI-601 chips and using an AD1848 codec.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-opti92x-ad1848.
config [31mCONFIG_SND_OPTI92X_CS4231[0m
tristate "OPTi 82C92x - CS4231"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_OPL4_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for soundcards based on Opti
82C92x chips and using a CS4231 codec.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-opti92x-cs4231.
config [31mCONFIG_SND_OPTI93X[0m
tristate "OPTi 82C93x"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for soundcards based on Opti
82C93x chips.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-opti93x.
config [31mCONFIG_SND_MIRO[0m
tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver"
select [31mCONFIG_SND_OPL4_LIB[0m
select [31mCONFIG_SND_WSS_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_PCM[0m
help
Say 'Y' or '[31mCONFIG_M[0m' to include support for Miro miroSOUND PCM1 pro,
miroSOUND PCM12 and miroSOUND PCM20 Radio soundcards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-miro.
config [31mCONFIG_SND_SB8[0m
tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_SB8_DSP[0m
help
Say Y here to include support for Creative Sound Blaster 1.0/
2.0/Pro (8-bit) or 100% compatible soundcards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-sb8.
config [31mCONFIG_SND_SB16[0m
tristate "Sound Blaster 16 (PnP)"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_SB16_DSP[0m
help
Say Y here to include support for Sound Blaster 16 soundcards
(including the Plug and Play version).
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-sb16.
config [31mCONFIG_SND_SBAWE[0m
tristate "Sound Blaster AWE (32,64) (PnP)"
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_SB16_DSP[0m
help
Say Y here to include support for Sound Blaster AWE soundcards
(including the Plug and Play version).
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-sbawe.
config [31mCONFIG_SND_SB16_CSP[0m
bool "Sound Blaster 16/AWE CSP support"
depends on ([31mCONFIG_SND_SB16[0m || [31mCONFIG_SND_SBAWE[0m) && ([31mCONFIG_BROKEN[0m || ![31mCONFIG_PPC[0m)
select [31mCONFIG_FW_LOADER[0m
help
Say Y here to include support for the CSP core. This special
coprocessor can do variable tasks like various compression and
decompression algorithms.
config [31mCONFIG_SND_SSCAPE[0m
tristate "Ensoniq SoundScape driver"
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
select [31mCONFIG_FW_LOADER[0m
help
Say Y here to include support for Ensoniq SoundScape
and Ensoniq OEM soundcards.
The PCM audio is supported on SoundScape Classic, Elite, PnP
and VIVO cards. The supported OEM cards are SPEA Media FX and
Reveal SC-600.
The MIDI support is very experimental and requires binary
firmware files called "scope.cod" and "sndscape.co?" where the
? is digit 0, 1, 2, 3 or 4. The firmware files can be found
in DOS or Windows driver packages. One has to put the firmware
files into the /lib/firmware directory.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-sscape.
config [31mCONFIG_SND_WAVEFRONT[0m
tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
select [31mCONFIG_FW_LOADER[0m
select [31mCONFIG_SND_OPL3_LIB[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_WSS_LIB[0m
help
Say Y here to include support for Turtle Beach Maui, Tropez
and Tropez+ soundcards based on the Wavefront chip.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-wavefront.
config [31mCONFIG_SND_MSND_PINNACLE[0m
tristate "Turtle Beach MultiSound Pinnacle/Fiji driver"
depends on [31mCONFIG_X86[0m
select [31mCONFIG_FW_LOADER[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_PCM[0m
help
Say Y to include support for Turtle Beach MultiSound Pinnacle/
Fiji soundcards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-msnd-pinnacle.
config [31mCONFIG_SND_MSND_CLASSIC[0m
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
depends on [31mCONFIG_X86[0m
select [31mCONFIG_FW_LOADER[0m
select [31mCONFIG_SND_MPU401_UART[0m
select [31mCONFIG_SND_PCM[0m
help
Say [31mCONFIG_M[0m here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
See <file:Documentation/sound/oss/MultiSound> for important information
about this driver. Note that it has been discontinued, but the
Voyetra Turtle Beach knowledge base entry for it is still available
at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-msnd-classic.
endif # [31mCONFIG_SND_ISA[0m