if [31mCONFIG_ARCH_PXA[0m
menu "Intel PXA2xx/PXA3xx Implementations"
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config [31mCONFIG_MACH_PXA25X_DT[0m
bool "Support PXA25x platforms from device tree"
select [31mCONFIG_PINCTRL[0m
select [31mCONFIG_POWER_SUPPLY[0m
select [31mCONFIG_PXA25x[0m
select [31mCONFIG_USE_OF[0m
help
Include support for Marvell [31mCONFIG_PXA25x[0m based platforms using
the device tree. Needn't select any other machine while
MACH_PXA25x_DT is enabled.
config [31mCONFIG_MACH_PXA27X_DT[0m
bool "Support PXA27x platforms from device tree"
select [31mCONFIG_PINCTRL[0m
select [31mCONFIG_POWER_SUPPLY[0m
select [31mCONFIG_PXA27x[0m
select [31mCONFIG_USE_OF[0m
help
Include support for Marvell [31mCONFIG_PXA27x[0m based platforms using
the device tree. Needn't select any other machine while
[31mCONFIG_MACH_PXA27X_DT[0m is enabled.
config [31mCONFIG_MACH_PXA3XX_DT[0m
bool "Support PXA3xx platforms from device tree"
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_PINCTRL[0m
select [31mCONFIG_POWER_SUPPLY[0m
select [31mCONFIG_PXA3xx[0m
select [31mCONFIG_USE_OF[0m
help
Include support for Marvell [31mCONFIG_PXA3xx[0m based platforms using
the device tree. Needn't select any other machine while
[31mCONFIG_MACH_PXA3XX_DT[0m is enabled.
config [31mCONFIG_ARCH_LUBBOCK[0m
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select [31mCONFIG_PXA25x[0m
select [31mCONFIG_SA1111[0m
config [31mCONFIG_MACH_MAINSTONE[0m
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_ZYLONITE[0m
bool
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_MACH_ZYLONITE300[0m
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_CPU_PXA310[0m
select [31mCONFIG_MACH_ZYLONITE[0m
config [31mCONFIG_MACH_ZYLONITE320[0m
bool "PXA3xx Development Platform (aka Zylonite) PXA320"
select [31mCONFIG_CPU_PXA320[0m
select [31mCONFIG_MACH_ZYLONITE[0m
config [31mCONFIG_MACH_LITTLETON[0m
bool "PXA3xx Form Factor Platform (aka Littleton)"
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_CPU_PXA310[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_MACH_TAVOREVB[0m
bool "PXA930 Evaluation Board (aka TavorEVB)"
select [31mCONFIG_CPU_PXA930[0m
select [31mCONFIG_CPU_PXA935[0m
select [31mCONFIG_PXA3xx[0m
select [31mCONFIG_FB[0m
select [31mCONFIG_FB_PXA[0m
config [31mCONFIG_MACH_SAAR[0m
bool "PXA930 Handheld Platform (aka SAAR)"
select [31mCONFIG_CPU_PXA930[0m
select [31mCONFIG_CPU_PXA935[0m
select [31mCONFIG_PXA3xx[0m
select [31mCONFIG_FB[0m
select [31mCONFIG_FB_PXA[0m
comment "Third Party Dev Platforms (sorted by vendor name)"
config [31mCONFIG_ARCH_PXA_IDP[0m
bool "Accelent Xscale IDP"
select [31mCONFIG_PXA25x[0m
config [31mCONFIG_ARCH_VIPER[0m
bool "Arcom/Eurotech VIPER SBC"
select [31mCONFIG_ARCOM_PCMCIA[0m
select [31mCONFIG_I2C_GPIO[0m if [31mCONFIG_I2C[0m=y
select [31mCONFIG_ISA[0m
select [31mCONFIG_PXA25x[0m
config [31mCONFIG_MACH_ARCOM_ZEUS[0m
bool "Arcom/Eurotech ZEUS SBC"
select [31mCONFIG_ARCOM_PCMCIA[0m
select [31mCONFIG_ISA[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_BALLOON3[0m
bool "Balloon 3 board"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_CSB726[0m
bool "Enable Cogent CSB726 System On a Module"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
config [31mCONFIG_CSB726_CSB701[0m
bool "Enable support for CSB701 baseboard"
depends on [31mCONFIG_MACH_CSB726[0m
config [31mCONFIG_MACH_ARMCORE[0m
bool "CompuLab CM-X255/CM-X270 modules"
select [31mCONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK[0m if [31mCONFIG_PCI[0m
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_MIGHT_HAVE_PCI[0m
select [31mCONFIG_NEED_MACH_IO_H[0m if [31mCONFIG_PCI[0m
select [31mCONFIG_PXA25x[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_EM_X270[0m
bool "CompuLab EM-x270 platform"
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_EXEDA[0m
bool "CompuLab eXeda platform"
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_CM_X300[0m
bool "CompuLab CM-X300 modules"
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_CPU_PXA310[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_MACH_CAPC7117[0m
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
select [31mCONFIG_CPU_PXA320[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_ARCH_GUMSTIX[0m
bool "Gumstix XScale 255 boards"
select [31mCONFIG_PXA25x[0m
help
Say Y here if you intend to run this kernel on
Basix, Connex, ws-200ax, ws-400ax systems
choice
prompt "Gumstix Carrier/Expansion Board"
depends on [31mCONFIG_ARCH_GUMSTIX[0m
config [31mCONFIG_GUMSTIX_AM200EPD[0m
bool "Enable AM200EPD board support"
config [31mCONFIG_GUMSTIX_AM300EPD[0m
bool "Enable AM300EPD board support"
endchoice
config [31mCONFIG_MACH_INTELMOTE2[0m
bool "Intel Mote 2 Platform"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_STARGATE2[0m
bool "Intel Stargate 2 Platform"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_XCEP[0m
bool "Iskratel Electronics XCEP"
select [31mCONFIG_MTD[0m
select [31mCONFIG_MTD_CFI[0m
select [31mCONFIG_MTD_CFI_INTELEXT[0m
select [31mCONFIG_MTD_PHYSMAP[0m
select [31mCONFIG_PXA25x[0m
help
PXA255 based Single Board Computer with [31mCONFIG_SMC[0m 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
config [31mCONFIG_TRIZEPS_PXA[0m
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
config [31mCONFIG_MACH_TRIZEPS4[0m
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on [31mCONFIG_TRIZEPS_PXA[0m
select [31mCONFIG_PXA27x[0m
select [31mCONFIG_TRIZEPS_PCMCIA[0m
config [31mCONFIG_MACH_TRIZEPS4WL[0m
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on [31mCONFIG_TRIZEPS_PXA[0m
select [31mCONFIG_MACH_TRIZEPS4[0m
select [31mCONFIG_PXA27x[0m
select [31mCONFIG_TRIZEPS_PCMCIA[0m
choice
prompt "Select base board for Trizeps module"
depends on [31mCONFIG_TRIZEPS_PXA[0m
config [31mCONFIG_MACH_TRIZEPS_CONXS[0m
bool "ConXS Eval Board"
config [31mCONFIG_MACH_TRIZEPS_UCONXS[0m
bool "uConXS Eval Board"
config [31mCONFIG_MACH_TRIZEPS_ANY[0m
bool "another Board"
endchoice
config [31mCONFIG_ARCOM_PCMCIA[0m
bool
help
Generic option for Arcom Viper/Zeus [31mCONFIG_PCMCIA[0m
config [31mCONFIG_TRIZEPS_PCMCIA[0m
bool
help
Enable [31mCONFIG_PCMCIA[0m support for Trizeps modules
config [31mCONFIG_MACH_LOGICPD_PXA270[0m
bool "LogicPD PXA270 Card Engine Development Platform"
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_PCM027[0m
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_PCM990_BASEBOARD[0m
bool "PHYTEC PCM-990 development board"
depends on [31mCONFIG_MACH_PCM027[0m
choice
prompt "display on pcm990"
depends on [31mCONFIG_MACH_PCM990_BASEBOARD[0m
config [31mCONFIG_PCM990_DISPLAY_SHARP[0m
bool "sharp lq084v1dg21 stn display"
config [31mCONFIG_PCM990_DISPLAY_NEC[0m
bool "nec nl6448bc20_18d tft display"
config [31mCONFIG_PCM990_DISPLAY_NONE[0m
bool "no display"
endchoice
config [31mCONFIG_MACH_COLIBRI[0m
bool "Toradex Colibri PXA270"
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_COLIBRI_PXA270_INCOME[0m
bool "Income s.r.o. PXA270 SBC"
depends on [31mCONFIG_MACH_COLIBRI[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_COLIBRI300[0m
bool "Toradex Colibri PXA300/310"
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_CPU_PXA310[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_MACH_COLIBRI320[0m
bool "Toradex Colibri PXA320"
select [31mCONFIG_CPU_PXA320[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_MACH_COLIBRI_EVALBOARD[0m
bool "Toradex Colibri Evaluation Carrier Board support"
depends on [31mCONFIG_MACH_COLIBRI[0m || [31mCONFIG_MACH_COLIBRI300[0m || [31mCONFIG_MACH_COLIBRI320[0m
config [31mCONFIG_MACH_VPAC270[0m
bool "Voipac PXA270"
select [31mCONFIG_HAVE_PATA_PLATFORM[0m
select [31mCONFIG_PXA27x[0m
help
PXA270 based Single Board Computer.
comment "End-user Products (sorted by vendor name)"
config [31mCONFIG_MACH_H4700[0m
bool "HP iPAQ hx4700"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_H5000[0m
bool "HP iPAQ h5000"
select [31mCONFIG_PXA25x[0m
config [31mCONFIG_MACH_HIMALAYA[0m
bool "HTC Himalaya Support"
select [31mCONFIG_CPU_PXA26x[0m
config [31mCONFIG_MACH_MAGICIAN[0m
bool "Enable HTC Magician Support"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_MIOA701[0m
bool "Mitac Mio A701 Support"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
for this PDA.
config [31mCONFIG_PXA_EZX[0m
bool "Motorola EZX Platform"
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_PXA27x[0m
config [31mCONFIG_MACH_EZX_A780[0m
bool "Motorola EZX A780"
default y
depends on [31mCONFIG_PXA_EZX[0m
config [31mCONFIG_MACH_EZX_E680[0m
bool "Motorola EZX E680"
default y
depends on [31mCONFIG_PXA_EZX[0m
config [31mCONFIG_MACH_EZX_A1200[0m
bool "Motorola EZX A1200"
default y
depends on [31mCONFIG_PXA_EZX[0m
config [31mCONFIG_MACH_EZX_A910[0m
bool "Motorola EZX A910"
default y
depends on [31mCONFIG_PXA_EZX[0m
config [31mCONFIG_MACH_EZX_E6[0m
bool "Motorola EZX E6"
default y
depends on [31mCONFIG_PXA_EZX[0m
config [31mCONFIG_MACH_EZX_E2[0m
bool "Motorola EZX E2"
default y
depends on [31mCONFIG_PXA_EZX[0m
config [31mCONFIG_MACH_MP900C[0m
bool "Nec Mobilepro 900/c"
select [31mCONFIG_PXA25x[0m
config [31mCONFIG_ARCH_PXA_PALM[0m
bool "PXA based Palm PDAs"
config [31mCONFIG_MACH_PALM27X[0m
bool
config [31mCONFIG_MACH_PALMTE2[0m
bool "Palm Tungsten|E2"
default y
depends on [31mCONFIG_ARCH_PXA_PALM[0m
select [31mCONFIG_PXA25x[0m
help
Say Y here if you intend to run this kernel on a Palm Tungsten|[31mCONFIG_E2[0m
handheld computer.
config [31mCONFIG_MACH_PALMTC[0m
bool "Palm Tungsten|C"
default y
depends on [31mCONFIG_ARCH_PXA_PALM[0m
select [31mCONFIG_PXA25x[0m
help
Say Y here if you intend to run this kernel on a Palm Tungsten|[31mCONFIG_C[0m
handheld computer.
config [31mCONFIG_MACH_PALMT5[0m
bool "Palm Tungsten|T5"
default y
depends on [31mCONFIG_ARCH_PXA_PALM[0m
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_MACH_PALM27X[0m
select [31mCONFIG_PXA27x[0m
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
config [31mCONFIG_MACH_PALMTX[0m
bool "Palm T|X"
default y
depends on [31mCONFIG_ARCH_PXA_PALM[0m
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_MACH_PALM27X[0m
select [31mCONFIG_PXA27x[0m
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
config [31mCONFIG_MACH_PALMZ72[0m
bool "Palm Zire 72"
default y
depends on [31mCONFIG_ARCH_PXA_PALM[0m
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_MACH_PALM27X[0m
select [31mCONFIG_PXA27x[0m
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
config [31mCONFIG_MACH_PALMLD[0m
bool "Palm LifeDrive"
default y
depends on [31mCONFIG_ARCH_PXA_PALM[0m
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_MACH_PALM27X[0m
select [31mCONFIG_PXA27x[0m
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
config [31mCONFIG_PALM_TREO[0m
bool
depends on [31mCONFIG_ARCH_PXA_PALM[0m
config [31mCONFIG_MACH_CENTRO[0m
bool "Palm Centro 685 (GSM)"
default y
depends on [31mCONFIG_ARCH_PXA_PALM[0m
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_MACH_PALM27X[0m
select [31mCONFIG_PALM_TREO[0m
select [31mCONFIG_PXA27x[0m
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
config [31mCONFIG_MACH_TREO680[0m
bool "Palm Treo 680"
default y
depends on [31mCONFIG_ARCH_PXA_PALM[0m
select [31mCONFIG_IWMMXT[0m
select [31mCONFIG_MACH_PALM27X[0m
select [31mCONFIG_PALM_TREO[0m
select [31mCONFIG_PXA27x[0m
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config [31mCONFIG_MACH_RAUMFELD_RC[0m
bool "Raumfeld Controller"
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_POWER_SUPPLY[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_MACH_RAUMFELD_CONNECTOR[0m
bool "Raumfeld Connector"
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_POWER_SUPPLY[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_MACH_RAUMFELD_SPEAKER[0m
bool "Raumfeld Speaker"
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_POWER_SUPPLY[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_PXA_SHARPSL[0m
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select [31mCONFIG_SHARP_PARAM[0m
select [31mCONFIG_SHARP_SCOOP[0m
help
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
config [31mCONFIG_PXA_SHARPSL_DETECT_MACH_ID[0m
bool "Detect machine ID at run-time in the decompressor"
depends on [31mCONFIG_PXA_SHARPSL[0m
help
Say Y here if you want the zImage decompressor to detect
the Zaurus machine ID at run-time. For latest kexec-based
boot loader, this is not necessary.
config [31mCONFIG_MACH_POODLE[0m
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on [31mCONFIG_PXA_SHARPSL[0m
select [31mCONFIG_PXA25x[0m
select [31mCONFIG_SHARP_LOCOMO[0m
config [31mCONFIG_MACH_CORGI[0m
bool "Enable Sharp SL-C700 (Corgi) Support"
depends on [31mCONFIG_PXA_SHARPSL[0m
select [31mCONFIG_PXA25x[0m
select [31mCONFIG_PXA_SHARP_C7xx[0m
config [31mCONFIG_MACH_SHEPHERD[0m
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on [31mCONFIG_PXA_SHARPSL[0m
select [31mCONFIG_PXA25x[0m
select [31mCONFIG_PXA_SHARP_C7xx[0m
config [31mCONFIG_MACH_HUSKY[0m
bool "Enable Sharp SL-C760 (Husky) Support"
depends on [31mCONFIG_PXA_SHARPSL[0m
select [31mCONFIG_PXA25x[0m
select [31mCONFIG_PXA_SHARP_C7xx[0m
config [31mCONFIG_MACH_AKITA[0m
bool "Enable Sharp SL-1000 (Akita) Support"
depends on [31mCONFIG_PXA_SHARPSL[0m
select [31mCONFIG_I2C[0m
select [31mCONFIG_I2C_PXA[0m
select [31mCONFIG_MACH_SPITZ[0m
select [31mCONFIG_PXA27x[0m
select [31mCONFIG_PXA_SHARP_Cxx00[0m
config [31mCONFIG_MACH_SPITZ[0m
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends on [31mCONFIG_PXA_SHARPSL[0m
select [31mCONFIG_PXA27x[0m
select [31mCONFIG_PXA_SHARP_Cxx00[0m
config [31mCONFIG_MACH_BORZOI[0m
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
depends on [31mCONFIG_PXA_SHARPSL[0m
select [31mCONFIG_PXA27x[0m
select [31mCONFIG_PXA_SHARP_Cxx00[0m
config [31mCONFIG_MACH_TOSA[0m
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on [31mCONFIG_PXA_SHARPSL[0m
select [31mCONFIG_PXA25x[0m
config [31mCONFIG_TOSA_BT[0m
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on [31mCONFIG_MACH_TOSA[0m && [31mCONFIG_NET[0m
select [31mCONFIG_RFKILL[0m
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
config [31mCONFIG_TOSA_USE_EXT_KEYCODES[0m
bool "Tosa keyboard: use extended keycodes"
depends on [31mCONFIG_MACH_TOSA[0m
default n
help
Say Y here to enable the tosa keyboard driver to generate extended
(>= 127) keycodes. Be aware, that they can't be correctly interpreted
by either console keyboard driver or by Kdrive keybd driver.
Say Y only if you know, what you are doing!
config [31mCONFIG_MACH_ICONTROL[0m
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
select [31mCONFIG_CPU_PXA320[0m
select [31mCONFIG_PXA3xx[0m
config [31mCONFIG_ARCH_PXA_ESERIES[0m
bool "PXA based Toshiba e-series PDAs"
select [31mCONFIG_FB_W100[0m
select [31mCONFIG_PXA25x[0m
config [31mCONFIG_MACH_E330[0m
bool "Toshiba e330"
default y
depends on [31mCONFIG_ARCH_PXA_ESERIES[0m
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
config [31mCONFIG_MACH_E350[0m
bool "Toshiba e350"
default y
depends on [31mCONFIG_ARCH_PXA_ESERIES[0m
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
config [31mCONFIG_MACH_E740[0m
bool "Toshiba e740"
default y
depends on [31mCONFIG_ARCH_PXA_ESERIES[0m
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config [31mCONFIG_MACH_E750[0m
bool "Toshiba e750"
default y
depends on [31mCONFIG_ARCH_PXA_ESERIES[0m
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config [31mCONFIG_MACH_E400[0m
bool "Toshiba e400"
default y
depends on [31mCONFIG_ARCH_PXA_ESERIES[0m
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config [31mCONFIG_MACH_E800[0m
bool "Toshiba e800"
default y
depends on [31mCONFIG_ARCH_PXA_ESERIES[0m
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
config [31mCONFIG_MACH_ZIPIT2[0m
bool "Zipit Z2 Handheld"
select [31mCONFIG_PXA27x[0m
endmenu
config [31mCONFIG_PXA25x[0m
bool
select [31mCONFIG_CPU_XSCALE[0m
help
Select code specific to PXA21x/25x/26x variants
config [31mCONFIG_PXA27x[0m
bool
select [31mCONFIG_CPU_XSCALE[0m
help
Select code specific to [31mCONFIG_PXA27x[0m variants
config [31mCONFIG_CPU_PXA26x[0m
bool
select [31mCONFIG_PXA25x[0m
help
Select code specific to PXA26x (codename Dalhart)
config [31mCONFIG_PXA3xx[0m
bool
select [31mCONFIG_CPU_XSC3[0m
help
Select code specific to [31mCONFIG_PXA3xx[0m variants
config [31mCONFIG_CPU_PXA300[0m
bool
select [31mCONFIG_PXA3xx[0m
help
PXA300 (codename Monahans-L)
config [31mCONFIG_CPU_PXA310[0m
bool
select [31mCONFIG_CPU_PXA300[0m
select [31mCONFIG_PXA310_ULPI[0m if [31mCONFIG_USB_ULPI[0m
help
PXA310 (codename Monahans-LV)
config [31mCONFIG_CPU_PXA320[0m
bool
select [31mCONFIG_PXA3xx[0m
help
PXA320 (codename Monahans-P)
config [31mCONFIG_CPU_PXA930[0m
bool
select [31mCONFIG_PXA3xx[0m
help
PXA930 (codename Tavor-P)
config [31mCONFIG_CPU_PXA935[0m
bool
select [31mCONFIG_CPU_PXA930[0m
help
PXA935 (codename Tavor-P65)
config [31mCONFIG_PXA_SHARP_C7xx[0m
bool
select [31mCONFIG_SHARPSL_PM[0m
help
Enable support for all Sharp C7xx models
config [31mCONFIG_PXA_SHARP_Cxx00[0m
bool
select [31mCONFIG_SHARPSL_PM[0m
help
Enable common support for Sharp Cxx00 models
config [31mCONFIG_SHARPSL_PM[0m
bool
select [31mCONFIG_APM_EMULATION[0m
select [31mCONFIG_SHARPSL_PM_MAX1111[0m
config [31mCONFIG_SHARPSL_PM_MAX1111[0m
bool
select [31mCONFIG_HWMON[0m
select [31mCONFIG_SENSORS_MAX1111[0m
select [31mCONFIG_SPI[0m
select [31mCONFIG_SPI_MASTER[0m
config [31mCONFIG_PXA310_ULPI[0m
bool
config [31mCONFIG_PXA_SYSTEMS_CPLDS[0m
tristate "Motherboard cplds"
default [31mCONFIG_ARCH_LUBBOCK[0m || [31mCONFIG_MACH_MAINSTONE[0m
help
This driver supports the Lubbock and Mainstone multifunction chip
found on the pxa25x development platform system (Lubbock) and pxa27x
development platform system (Mainstone). This IO board supports the
interrupts handling, ethernet controller, flash chips, etc ...
endif