//----------------------------------------------------------------------------
//
// File generated by S1D13806CFG.EXE
//
// Copyright (c) 2000,2001 Epson Research and Development, Inc.
// All rights reserved.
//
//----------------------------------------------------------------------------
// Panel: (active) 640x480 77Hz STN Single 8-bit (PCLK=CLKI=25.175MHz)
// Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=33.333MHz)
#define SWIVEL_VIEW 0 /* 0:none, 1:90 not completed */
static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {
{0x0001,0x00}, // Miscellaneous Register
{0x01FC,0x00}, // Display Mode Register
#if defined([31mCONFIG_PLAT_MAPPI[0m)
{0x0004,0x00}, // General IO Pins Configuration Register 0
{0x0005,0x00}, // General IO Pins Configuration Register 1
{0x0008,0x00}, // General IO Pins Control Register 0
{0x0009,0x00}, // General IO Pins Control Register 1
{0x0010,0x00}, // Memory Clock Configuration Register
{0x0014,0x00}, // LCD Pixel Clock Configuration Register
{0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register
{0x001C,0x00}, // MediaPlug Clock Configuration Register
/*
* .. 10MHz: 0x00
* .. 30MHz: 0x01
* 30MHz ..: 0x02
*/
{0x001E,0x02}, // CPU To Memory Wait State Select Register
{0x0021,0x02}, // DRAM Refresh Rate Register
{0x002A,0x11}, // DRAM Timings Control Register 0
{0x002B,0x13}, // DRAM Timings Control Register 1
{0x0020,0x80}, // Memory Configuration Register
{0x0030,0x25}, // Panel Type Register
{0x0031,0x00}, // MOD Rate Register
{0x0032,0x4F}, // LCD Horizontal Display Width Register
{0x0034,0x12}, // LCD Horizontal Non-Display Period Register
{0x0035,0x01}, // TFT FPLINE Start Position Register
{0x0036,0x0B}, // TFT FPLINE Pulse Width Register
{0x0038,0xDF}, // LCD Vertical Display Height Register 0
{0x0039,0x01}, // LCD Vertical Display Height Register 1
{0x003A,0x2C}, // LCD Vertical Non-Display Period Register
{0x003B,0x0A}, // TFT FPFRAME Start Position Register
{0x003C,0x01}, // TFT FPFRAME Pulse Width Register
{0x0041,0x00}, // LCD Miscellaneous Register
{0x0042,0x00}, // LCD Display Start Address Register 0
{0x0043,0x00}, // LCD Display Start Address Register 1
{0x0044,0x00}, // LCD Display Start Address Register 2
#elif defined([31mCONFIG_PLAT_M32700UT[0m) || defined([31mCONFIG_PLAT_OPSPUT[0m) || defined([31mCONFIG_PLAT_MAPPI3[0m)
{0x0004,0x07}, // GPIO[0:7] direction
{0x0005,0x00}, // GPIO[8:12] direction
{0x0008,0x00}, // GPIO[0:7] data
{0x0009,0x00}, // GPIO[8:12] data
{0x0008,0x04}, // LCD panel Vcc on
{0x0008,0x05}, // LCD panel reset
{0x0010,0x01}, // Memory Clock Configuration Register
{0x0014,0x30}, // LCD Pixel Clock Configuration Register (CLKI 22MHz/4)
{0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register
{0x001C,0x00}, // MediaPlug Clock Configuration Register(10MHz)
{0x001E,0x00}, // CPU To Memory Wait State Select Register
{0x0020,0x80}, // Memory Configuration Register
{0x0021,0x03}, // DRAM Refresh Rate Register
{0x002A,0x00}, // DRAM Timings Control Register 0
{0x002B,0x01}, // DRAM Timings Control Register 1
{0x0030,0x25}, // Panel Type Register
{0x0031,0x00}, // MOD Rate Register
{0x0032,0x1d}, // LCD Horizontal Display Width Register
{0x0034,0x05}, // LCD Horizontal Non-Display Period Register
{0x0035,0x01}, // TFT FPLINE Start Position Register
{0x0036,0x01}, // TFT FPLINE Pulse Width Register
{0x0038,0x3F}, // LCD Vertical Display Height Register 0
{0x0039,0x01}, // LCD Vertical Display Height Register 1
{0x003A,0x0b}, // LCD Vertical Non-Display Period Register
{0x003B,0x07}, // TFT FPFRAME Start Position Register
{0x003C,0x02}, // TFT FPFRAME Pulse Width Register
{0x0041,0x00}, // LCD Miscellaneous Register
#if (SWIVEL_VIEW == 0)
{0x0042,0x00}, // LCD Display Start Address Register 0
{0x0043,0x00}, // LCD Display Start Address Register 1
{0x0044,0x00}, // LCD Display Start Address Register 2
#elif (SWIVEL_VIEW == 1)
// 1024 - W(320) = 0x2C0
{0x0042,0xC0}, // LCD Display Start Address Register 0
{0x0043,0x02}, // LCD Display Start Address Register 1
{0x0044,0x00}, // LCD Display Start Address Register 2
// 1024
{0x0046,0x00}, // LCD Memory Address Offset Register 0
{0x0047,0x02}, // LCD Memory Address Offset Register 1
#else
#error unsupported SWIVEL_VIEW mode
#endif
#else
#error no platform configuration
#endif /* CONFIG_PLAT_XXX */
{0x0048,0x00}, // LCD Pixel Panning Register
{0x004A,0x00}, // LCD Display FIFO High Threshold Control Register
{0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register
{0x0050,0x4F}, // CRT/TV Horizontal Display Width Register
{0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register
{0x0053,0x01}, // CRT/TV HRTC Start Position Register
{0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register
{0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0
{0x0057,0x01}, // CRT/TV Vertical Display Height Register 1
{0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register
{0x0059,0x09}, // CRT/TV VRTC Start Position Register
{0x005A,0x01}, // CRT/TV VRTC Pulse Width Register
{0x005B,0x10}, // TV Output Control Register
{0x0062,0x00}, // CRT/TV Display Start Address Register 0
{0x0063,0x00}, // CRT/TV Display Start Address Register 1
{0x0064,0x00}, // CRT/TV Display Start Address Register 2
{0x0068,0x00}, // CRT/TV Pixel Panning Register
{0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register
{0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register
{0x0070,0x00}, // LCD Ink/Cursor Control Register
{0x0071,0x01}, // LCD Ink/Cursor Start Address Register
{0x0072,0x00}, // LCD Cursor X Position Register 0
{0x0073,0x00}, // LCD Cursor X Position Register 1
{0x0074,0x00}, // LCD Cursor Y Position Register 0
{0x0075,0x00}, // LCD Cursor Y Position Register 1
{0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register
{0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register
{0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register
{0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register
{0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register
{0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register
{0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register
{0x0080,0x00}, // CRT/TV Ink/Cursor Control Register
{0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register
{0x0082,0x00}, // CRT/TV Cursor X Position Register 0
{0x0083,0x00}, // CRT/TV Cursor X Position Register 1
{0x0084,0x00}, // CRT/TV Cursor Y Position Register 0
{0x0085,0x00}, // CRT/TV Cursor Y Position Register 1
{0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register
{0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register
{0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register
{0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register
{0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register
{0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register
{0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register
{0x0100,0x00}, // BitBlt Control Register 0
{0x0101,0x00}, // BitBlt Control Register 1
{0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register
{0x0103,0x00}, // BitBlt Operation Register
{0x0104,0x00}, // BitBlt Source Start Address Register 0
{0x0105,0x00}, // BitBlt Source Start Address Register 1
{0x0106,0x00}, // BitBlt Source Start Address Register 2
{0x0108,0x00}, // BitBlt Destination Start Address Register 0
{0x0109,0x00}, // BitBlt Destination Start Address Register 1
{0x010A,0x00}, // BitBlt Destination Start Address Register 2
{0x010C,0x00}, // BitBlt Memory Address Offset Register 0
{0x010D,0x00}, // BitBlt Memory Address Offset Register 1
{0x0110,0x00}, // BitBlt Width Register 0
{0x0111,0x00}, // BitBlt Width Register 1
{0x0112,0x00}, // BitBlt Height Register 0
{0x0113,0x00}, // BitBlt Height Register 1
{0x0114,0x00}, // BitBlt Background Color Register 0
{0x0115,0x00}, // BitBlt Background Color Register 1
{0x0118,0x00}, // BitBlt Foreground Color Register 0
{0x0119,0x00}, // BitBlt Foreground Color Register 1
{0x01E0,0x00}, // Look-Up Table Mode Register
{0x01E2,0x00}, // Look-Up Table Address Register
{0x01F0,0x10}, // Power Save Configuration Register
{0x01F1,0x00}, // Power Save Status Register
{0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register
#if (SWIVEL_VIEW == 0)
{0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
#elif (SWIVEL_VIEW == 1)
{0x01FC,0x41}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
#else
#error unsupported SWIVEL_VIEW mode
#endif /* SWIVEL_VIEW */
#if defined([31mCONFIG_PLAT_M32700UT[0m) || defined([31mCONFIG_PLAT_OPSPUT[0m) || defined([31mCONFIG_PLAT_MAPPI3[0m)
{0x0008,0x07}, // LCD panel Vdd & Vg on
#endif
{0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
#if defined([31mCONFIG_PLAT_MAPPI[0m)
{0x0046,0x80}, // LCD Memory Address Offset Register 0
{0x0047,0x02}, // LCD Memory Address Offset Register 1
#elif defined([31mCONFIG_PLAT_M32700UT[0m) || defined([31mCONFIG_PLAT_OPSPUT[0m) || defined([31mCONFIG_PLAT_MAPPI3[0m)
{0x0046,0xf0}, // LCD Memory Address Offset Register 0
{0x0047,0x00}, // LCD Memory Address Offset Register 1
#endif
{0x0060,0x05}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
{0x0066,0x80}, // CRT/TV Memory Address Offset Register 0 // takeo
{0x0067,0x02}, // CRT/TV Memory Address Offset Register 1
};