/*
* SBSA(Server Base System Architecture) Generic Watchdog driver
*
* Copyright (c) 2015, Linaro Ltd.
* Author: Fu Wei <fu.wei@linaro.org>
* Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
* Al Stone <al.stone@linaro.org>
* Timur Tabi <timur@codeaurora.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* ARM SBSA Generic Watchdog has two stage timeouts:
* the first signal (WS0) is for alerting the system by interrupt,
* the second one (WS1) is a real hardware reset.
* More details about the hardware specification of this device:
* ARM DEN0029B - Server Base System Architecture (SBSA)
*
* This driver can operate ARM SBSA Generic Watchdog as a single stage watchdog
* or a two stages watchdog, it's set up by the module parameter "action".
* In the single stage mode, when the timeout is reached, your system
* will be reset by WS1. The first signal (WS0) is ignored.
* In the two stages mode, when the timeout is reached, the first signal (WS0)
* will trigger panic. If the system is getting into trouble and cannot be reset
* by panic or restart properly by the kdump kernel(if supported), then the
* second stage (as long as the first stage) will be reached, system will be
* reset by WS1. This function can help administrator to backup the system
* context info by panic console output or kdump.
*
* SBSA GWDT:
* if action is 1 (the two stages mode):
* |--------WOR-------WS0--------WOR-------WS1
* |----timeout-----(panic)----timeout-----reset
*
* if action is 0 (the single stage mode):
* |------WOR-----WS0(ignored)-----WOR------WS1
* |--------------timeout-------------------reset
*
* Note: Since this watchdog timer has two stages, and each stage is determined
* by WOR, in the single stage mode, the timeout is (WOR * 2); in the two
* stages mode, the timeout is WOR. The maximum timeout in the two stages mode
* is half of that in the single stage mode.
*
*/
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/watchdog.h>
#include <asm/arch_timer.h>
#define DRV_NAME "sbsa-gwdt"
#define WATCHDOG_NAME "SBSA Generic Watchdog"
/* SBSA Generic Watchdog register definitions */
/* refresh frame */
#define SBSA_GWDT_WRR 0x000
/* control frame */
#define SBSA_GWDT_WCS 0x000
#define SBSA_GWDT_WOR 0x008
#define SBSA_GWDT_WCV 0x010
/* refresh/control frame */
#define SBSA_GWDT_W_IIDR 0xfcc
#define SBSA_GWDT_IDR 0xfd0
/* Watchdog Control and Status Register */
#define SBSA_GWDT_WCS_EN BIT(0)
#define SBSA_GWDT_WCS_WS0 BIT(1)
#define SBSA_GWDT_WCS_WS1 BIT(2)
/**
* struct sbsa_gwdt - Internal representation of the SBSA GWDT
* @wdd: kernel watchdog_device structure
* @clk: store the System Counter clock frequency, in Hz.
* @refresh_base: Virtual address of the watchdog refresh frame
* @control_base: Virtual address of the watchdog control frame
*/
struct sbsa_gwdt {
struct watchdog_device wdd;
u32 clk;
void __iomem *refresh_base;
void __iomem *control_base;
};
#define DEFAULT_TIMEOUT 10 /* seconds */
static unsigned int timeout;
module_param(timeout, uint, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. (>=0, default="
__MODULE_STRING(DEFAULT_TIMEOUT) ")");
/*
* action refers to action taken when watchdog gets WS0
* 0 = skip
* 1 = panic
* defaults to skip (0)
*/
static int action;
module_param(action, int, 0);
MODULE_PARM_DESC(action, "after watchdog gets WS0 interrupt, do: "
"0 = skip(*) 1 = panic");
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, S_IRUGO);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* watchdog operation functions
*/
static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd,
unsigned int timeout)
{
struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
wdd->timeout = timeout;
if (action)
writel(gwdt->clk * timeout,
gwdt->control_base + SBSA_GWDT_WOR);
else
/*
* In the single stage mode, The first signal (WS0) is ignored,
* the timeout is (WOR * 2), so the WOR should be configured
* to half value of timeout.
*/
writel(gwdt->clk / 2 * timeout,
gwdt->control_base + SBSA_GWDT_WOR);
return 0;
}
static unsigned int sbsa_gwdt_get_timeleft(struct watchdog_device *wdd)
{
struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
u64 timeleft = 0;
/*
* In the single stage mode, if WS0 is deasserted
* (watchdog is in the first stage),
* timeleft = WOR + (WCV - system counter)
*/
if (!action &&
!(readl(gwdt->control_base + SBSA_GWDT_WCS) & SBSA_GWDT_WCS_WS0))
timeleft += readl(gwdt->control_base + SBSA_GWDT_WOR);
timeleft += readq(gwdt->control_base + SBSA_GWDT_WCV) -
arch_counter_get_cntvct();
do_div(timeleft, gwdt->clk);
return timeleft;
}
static int sbsa_gwdt_keepalive(struct watchdog_device *wdd)
{
struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
/*
* Writing WRR for an explicit watchdog refresh.
* You can write anyting (like 0).
*/
writel(0, gwdt->refresh_base + SBSA_GWDT_WRR);
return 0;
}
static int sbsa_gwdt_start(struct watchdog_device *wdd)
{
struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
/* writing WCS will cause an explicit watchdog refresh */
writel(SBSA_GWDT_WCS_EN, gwdt->control_base + SBSA_GWDT_WCS);
return 0;
}
static int sbsa_gwdt_stop(struct watchdog_device *wdd)
{
struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
/* Simply write 0 to WCS to clean WCS_EN bit */
writel(0, gwdt->control_base + SBSA_GWDT_WCS);
return 0;
}
static irqreturn_t sbsa_gwdt_interrupt(int irq, void *dev_id)
{
panic(WATCHDOG_NAME " timeout");
return IRQ_HANDLED;
}
static struct watchdog_info sbsa_gwdt_info = {
.identity = WATCHDOG_NAME,
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE |
WDIOF_CARDRESET,
};
static struct watchdog_ops sbsa_gwdt_ops = {
.owner = THIS_MODULE,
.start = sbsa_gwdt_start,
.stop = sbsa_gwdt_stop,
.ping = sbsa_gwdt_keepalive,
.set_timeout = sbsa_gwdt_set_timeout,
.get_timeleft = sbsa_gwdt_get_timeleft,
};
static int sbsa_gwdt_probe(struct platform_device *pdev)
{
void __iomem *rf_base, *cf_base;
struct device *dev = &pdev->dev;
struct watchdog_device *wdd;
struct sbsa_gwdt *gwdt;
struct resource *res;
int ret, irq;
u32 status;
gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
if (!gwdt)
return -ENOMEM;
platform_set_drvdata(pdev, gwdt);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
cf_base = devm_ioremap_resource(dev, res);
if (IS_ERR(cf_base))
return PTR_ERR(cf_base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
rf_base = devm_ioremap_resource(dev, res);
if (IS_ERR(rf_base))
return PTR_ERR(rf_base);
/*
* Get the frequency of system counter from the cp15 interface of ARM
* Generic timer. We don't need to check it, because if it returns "0",
* system would panic in very early stage.
*/
gwdt->clk = arch_timer_get_cntfrq();
gwdt->refresh_base = rf_base;
gwdt->control_base = cf_base;
wdd = &gwdt->wdd;
wdd->parent = dev;
wdd->info = &sbsa_gwdt_info;
wdd->ops = &sbsa_gwdt_ops;
wdd->min_timeout = 1;
wdd->max_hw_heartbeat_ms = U32_MAX / gwdt->clk * 1000;
wdd->timeout = DEFAULT_TIMEOUT;
watchdog_set_drvdata(wdd, gwdt);
watchdog_set_nowayout(wdd, nowayout);
status = readl(cf_base + SBSA_GWDT_WCS);
if (status & SBSA_GWDT_WCS_WS1) {
dev_warn(dev, "System reset by WDT.\n");
wdd->bootstatus |= WDIOF_CARDRESET;
}
if (status & SBSA_GWDT_WCS_EN)
set_bit(WDOG_HW_RUNNING, &wdd->status);
if (action) {
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
action = 0;
dev_warn(dev, "unable to get ws0 interrupt.\n");
} else {
/*
* In case there is a pending ws0 interrupt, just ping
* the watchdog before registering the interrupt routine
*/
writel(0, rf_base + SBSA_GWDT_WRR);
if (devm_request_irq(dev, irq, sbsa_gwdt_interrupt, 0,
pdev->name, gwdt)) {
action = 0;
dev_warn(dev, "unable to request IRQ %d.\n",
irq);
}
}
if (!action)
dev_warn(dev, "falling back to single stage mode.\n");
}
/*
* In the single stage mode, The first signal (WS0) is ignored,
* the timeout is (WOR * 2), so the maximum timeout should be doubled.
*/
if (!action)
wdd->max_hw_heartbeat_ms *= 2;
watchdog_init_timeout(wdd, timeout, dev);
/*
* Update timeout to WOR.
* Because of the explicit watchdog refresh mechanism,
* it's also a ping, if watchdog is enabled.
*/
sbsa_gwdt_set_timeout(wdd, wdd->timeout);
ret = watchdog_register_device(wdd);
if (ret)
return ret;
dev_info(dev, "Initialized with %ds timeout @ %u Hz, action=%d.%s\n",
wdd->timeout, gwdt->clk, action,
status & SBSA_GWDT_WCS_EN ? " [enabled]" : "");
return 0;
}
static void sbsa_gwdt_shutdown(struct platform_device *pdev)
{
struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);
sbsa_gwdt_stop(&gwdt->wdd);
}
static int sbsa_gwdt_remove(struct platform_device *pdev)
{
struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);
watchdog_unregister_device(&gwdt->wdd);
return 0;
}
/* Disable watchdog if it is active during suspend */
static int __maybe_unused sbsa_gwdt_suspend(struct device *dev)
{
struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);
if (watchdog_active(&gwdt->wdd))
sbsa_gwdt_stop(&gwdt->wdd);
return 0;
}
/* Enable watchdog if necessary */
static int __maybe_unused sbsa_gwdt_resume(struct device *dev)
{
struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);
if (watchdog_active(&gwdt->wdd))
sbsa_gwdt_start(&gwdt->wdd);
return 0;
}
static const struct dev_pm_ops sbsa_gwdt_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(sbsa_gwdt_suspend, sbsa_gwdt_resume)
};
static const struct of_device_id sbsa_gwdt_of_match[] = {
{ .compatible = "arm,sbsa-gwdt", },
{},
};
MODULE_DEVICE_TABLE(of, sbsa_gwdt_of_match);
static const struct platform_device_id sbsa_gwdt_pdev_match[] = {
{ .name = DRV_NAME, },
{},
};
MODULE_DEVICE_TABLE(platform, sbsa_gwdt_pdev_match);
static struct platform_driver sbsa_gwdt_driver = {
.driver = {
.name = DRV_NAME,
.pm = &sbsa_gwdt_pm_ops,
.of_match_table = sbsa_gwdt_of_match,
},
.probe = sbsa_gwdt_probe,
.remove = sbsa_gwdt_remove,
.shutdown = sbsa_gwdt_shutdown,
.id_table = sbsa_gwdt_pdev_match,
};
module_platform_driver(sbsa_gwdt_driver);
MODULE_DESCRIPTION("SBSA Generic Watchdog Driver");
MODULE_AUTHOR("Fu Wei <fu.wei@linaro.org>");
MODULE_AUTHOR("Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>");
MODULE_AUTHOR("Al Stone <al.stone@linaro.org>");
MODULE_AUTHOR("Timur Tabi <timur@codeaurora.org>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" DRV_NAME);