# SPDX-License-Identifier: GPL-2.0-only
menuconfig [31mCONFIG_FUSION[0m
bool "Fusion MPT device support"
depends on [31mCONFIG_PCI[0m
---help---
Say Y here to get to see options for Fusion Message
Passing Technology (MPT) drivers.
This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
if [31mCONFIG_FUSION[0m
config [31mCONFIG_FUSION_SPI[0m
tristate "Fusion MPT ScsiHost drivers for SPI"
depends on [31mCONFIG_PCI[0m && [31mCONFIG_SCSI[0m
select [31mCONFIG_SCSI_SPI_ATTRS[0m
---help---
[31mCONFIG_SCSI[0m HOST support for a parallel [31mCONFIG_SCSI[0m host adapters.
List of supported controllers:
LSI53C1020
LSI53C1020A
LSI53C1030
LSI53C1035
ATTO UL4D
config [31mCONFIG_FUSION_FC[0m
tristate "Fusion MPT ScsiHost drivers for FC"
depends on [31mCONFIG_PCI[0m && [31mCONFIG_SCSI[0m
depends on [31mCONFIG_SCSI_FC_ATTRS[0m
---help---
[31mCONFIG_SCSI[0m HOST support for a Fiber Channel host adapters.
List of supported controllers:
LSIFC909
LSIFC919
LSIFC919X
LSIFC929
LSIFC929X
LSIFC929XL
LSIFC949X
LSIFC949E
Brocade FC 410/420
config [31mCONFIG_FUSION_SAS[0m
tristate "Fusion MPT ScsiHost drivers for SAS"
depends on [31mCONFIG_PCI[0m && [31mCONFIG_SCSI[0m
select [31mCONFIG_SCSI_SAS_ATTRS[0m
---help---
[31mCONFIG_SCSI[0m HOST support for a SAS host adapters.
List of supported controllers:
LSISAS1064
LSISAS1068
LSISAS1064E
LSISAS1068E
LSISAS1078
config [31mCONFIG_FUSION_MAX_SGE[0m
int "Maximum number of scatter gather entries (16 - 128)"
default "128"
range 16 128
help
This option allows you to specify the maximum number of scatter-
gather entries per I/O. The driver default is 128, which matches
SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16.
Decreasing this parameter will reduce memory requirements
on a per controller instance.
config [31mCONFIG_FUSION_CTL[0m
tristate "Fusion MPT misc device (ioctl) driver"
depends on [31mCONFIG_FUSION_SPI[0m || [31mCONFIG_FUSION_FC[0m || [31mCONFIG_FUSION_SAS[0m
---help---
The Fusion MPT misc device driver provides specialized control
of MPT adapters via system ioctl calls. Use of ioctl calls to
the MPT driver requires that you create and use a misc device
node ala:
mknod /dev/mptctl c 10 240
One use of this ioctl interface is to perform an upgrade (reflash)
of the MPT adapter firmware. Refer to readme file(s) distributed
with the Fusion MPT linux driver for additional details.
If enabled by saying [31mCONFIG_M[0m to this, a driver named: mptctl
will be compiled.
If unsure whether you really want or need this, say N.
config [31mCONFIG_FUSION_LAN[0m
tristate "Fusion MPT LAN driver"
depends on [31mCONFIG_FUSION_FC[0m && [31mCONFIG_NET_FC[0m
---help---
This module supports LAN IP traffic over Fibre Channel port(s)
on Fusion MPT compatible hardware (LSIFC9xx chips).
The physical interface used is defined in RFC 2625.
Please refer to that document for details.
Installing this driver requires the knowledge to configure and
activate a new network interface, "fc0", using standard Linux tools.
If enabled by saying [31mCONFIG_M[0m to this, a driver named: mptlan
will be compiled.
If unsure whether you really want or need this, say N.
config [31mCONFIG_FUSION_LOGGING[0m
bool "Fusion MPT logging facility"
---help---
This turns on a logging facility that can be used to debug a number
of Fusion MPT related problems.
The debug level can be programmed on the fly via SysFS (hex values)
echo [level] > /sys/class/scsi_host/host#/debug_level
There are various debug levels that can be found in the source:
file:drivers/message/fusion/mptdebug.h
endif # [31mCONFIG_FUSION[0m