// SPDX-License-Identifier: GPL-2.0
/*
* SAMSUNG EXYNOS5410 SoC device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
* EXYNOS5410 based board files can include this file and provide
* values for board specfic bindings.
*/
#include "exynos54xx.dtsi"
#include <dt-bindings/clock/exynos5410.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "samsung,exynos5410", "samsung,exynos5";
interrupt-parent = <&gic>;
aliases {
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
clock-frequency = <1600000000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
clock-frequency = <1600000000>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
clock-frequency = <1600000000>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
clock-frequency = <1600000000>;
};
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
pmu_system_controller: system-controller@10040000 {
compatible = "samsung,exynos5410-pmu", "syscon";
reg = <0x10040000 0x5000>;
clock-names = "clkout16";
clocks = <&fin_pll>;
#clock-cells = <1>;
};
clock: clock-controller@10010000 {
compatible = "samsung,exynos5410-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
};
clock_audss: audss-clock-controller@3810000 {
compatible = "samsung,exynos5410-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
clock-names = "pll_ref", "pll_in";
};
tmu_cpu0: tmu@10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#thermal-sensor-cells = <0>;
};
tmu_cpu1: tmu@10064000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#thermal-sensor-cells = <0>;
};
tmu_cpu2: tmu@10068000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10068000 0x100>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#thermal-sensor-cells = <0>;
};
tmu_cpu3: tmu@1006c000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x1006c000 0x100>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#thermal-sensor-cells = <0>;
};
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12200000 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
};
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12210000 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
};
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12220000 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
};
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x13400000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@14000000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x14000000 0x1000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x10d10000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@3860000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x03860000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
amba {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges;
pdma0: pdma@121a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121a0000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: pdma@121b0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121b0000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
};
audi2s0: i2s@3830000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x03830000 0x100>;
dmas = <&pdma0 10
&pdma0 9
&pdma0 8>;
dma-names = "tx", "rx", "tx-sec";
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
#clock-cells = <1>;
clock-output-names = "i2s_cdclk0";
#sound-dai-cells = <1>;
samsung,idma-addr = <0x03000000>;
pinctrl-names = "default";
pinctrl-0 = <&audi2s0_bus>;
status = "disabled";
};
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0>;
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1>;
#include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2>;
#include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3>;
#include "exynos5420-trip-points.dtsi"
};
};
};
&adc {
clocks = <&clock CLK_TSADC>;
clock-names = "adc";
samsung,syscon-phandle = <&pmu_system_controller>;
};
&arm_a15_pmu {
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
status = "okay";
};
&i2c_0 {
clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
};
&i2c_1 {
clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
};
&i2c_2 {
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
};
&i2c_3 {
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
};
&hsi2c_4 {
clocks = <&clock CLK_USI0>;
clock-names = "hsi2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_hs_bus>;
};
&hsi2c_5 {
clocks = <&clock CLK_USI1>;
clock-names = "hsi2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_hs_bus>;
};
&hsi2c_6 {
clocks = <&clock CLK_USI2>;
clock-names = "hsi2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_hs_bus>;
};
&hsi2c_7 {
clocks = <&clock CLK_USI3>;
clock-names = "hsi2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_hs_bus>;
};
&mct {
clocks = <&fin_pll>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
};
&prng {
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
&pwm {
clocks = <&clock CLK_PWM>;
clock-names = "timers";
};
&rtc {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
};
&serial_0 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 13>, <&pdma0 14>;
dma-names = "rx", "tx";
};
&serial_1 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 15>, <&pdma1 16>;
dma-names = "rx", "tx";
};
&serial_2 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 15>, <&pdma0 16>;
dma-names = "rx", "tx";
};
&serial_3 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 17>, <&pdma1 18>;
dma-names = "rx", "tx";
};
&sss {
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
&sromc {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x04000000 0x20000
1 0 0x05000000 0x20000
2 0 0x06000000 0x20000
3 0 0x07000000 0x20000>;
};
&trng {
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
&usbdrd3_0 {
clocks = <&clock CLK_USBD300>;
clock-names = "usbdrd30";
};
&usbdrd_phy0 {
clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
clock-names = "phy", "ref";
samsung,pmu-syscon = <&pmu_system_controller>;
};
&usbdrd3_1 {
clocks = <&clock CLK_USBD301>;
clock-names = "usbdrd30";
};
&usbdrd_dwc3_1 {
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
};
&usbdrd_phy1 {
clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
clock-names = "phy", "ref";
samsung,pmu-syscon = <&pmu_system_controller>;
};
&usbhost1 {
clocks = <&clock CLK_USBH20>;
clock-names = "usbhost";
};
&usbhost2 {
clocks = <&clock CLK_USBH20>;
clock-names = "usbhost";
};
&usb2_phy {
clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
clock-names = "phy", "ref";
samsung,sysreg-phandle = <&sysreg_system_controller>;
samsung,pmureg-phandle = <&pmu_system_controller>;
};
&watchdog {
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
};
#include "exynos5410-pinctrl.dtsi"
#include "exynos-syscon-restart.dtsi"