// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2006 PA Semi, Inc
*
* Authors: Kip Walker, PA Semi
* Olof Johansson, PA Semi
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
* Based on arch/powerpc/platforms/maple/pci.c
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <asm/pci-bridge.h>
#include <asm/isa-bridge.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#include "pasemi.h"
#define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset)
{
/* Device 0 Function 0 is special: It's config space spans function 1 as
* well, so allow larger offset. It's really a two-function device but the
* second function does not probe.
*/
if (bus == 0 && devfn == 0)
return offset < 8192;
else
return offset < 4096;
}
static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose,
u8 bus, u8 devfn, int offset)
{
return hose->cfg_data + PA_PXP_CFA(bus, devfn, offset);
}
static inline int is_root_port(int busno, int devfn)
{
return ((busno == 0) && (PCI_FUNC(devfn) < 4) &&
((PCI_SLOT(devfn) == 16) || (PCI_SLOT(devfn) == 17)));
}
static inline int is_5945_reg(int reg)
{
return (((reg >= 0x18) && (reg < 0x34)) ||
((reg >= 0x158) && (reg < 0x178)));
}
static int workaround_5945(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
void volatile __iomem *addr, *dummy;
int byte;
u32 tmp;
if (!is_root_port(bus->number, devfn) || !is_5945_reg(offset))
return 0;
hose = pci_bus_to_host(bus);
addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset & ~0x3);
byte = offset & 0x3;
/* Workaround bug 5945: write 0 to a dummy register before reading,
* and write back what we read. We must read/write the full 32-bit
* contents so we need to shift and mask by hand.
*/
dummy = pa_pxp_cfg_addr(hose, bus->number, devfn, 0x10);
out_le32(dummy, 0);
tmp = in_le32(addr);
out_le32(addr, tmp);
switch (len) {
case 1:
*val = (tmp >> (8*byte)) & 0xff;
break;
case 2:
if (byte == 0)
*val = tmp & 0xffff;
else
*val = (tmp >> 16) & 0xffff;
break;
default:
*val = tmp;
break;
}
return 1;
}
#ifdef [31mCONFIG_PPC_PASEMI_NEMO[0m
#define PXP_ERR_CFG_REG 0x4
#define PXP_IGNORE_PCIE_ERRORS 0x800
#define SB600_BUS 5
static void sb600_set_flag(int bus)
{
static void __iomem *iob_mapbase = NULL;
struct resource res;
struct device_node *dn;
int err;
if (iob_mapbase == NULL) {
dn = of_find_compatible_node(NULL, "isa", "pasemi,1682m-iob");
if (!dn) {
pr_crit("NEMO SB600 missing iob node\n");
return;
}
err = of_address_to_resource(dn, 0, &res);
of_node_put(dn);
if (err) {
pr_crit("NEMO SB600 missing resource\n");
return;
}
pr_info("NEMO SB600 IOB base %08llx\n",res.start);
iob_mapbase = ioremap(res.start + 0x100, 0x94);
}
if (iob_mapbase != NULL) {
if (bus == SB600_BUS) {
/*
* This is the SB600's bus, tell the PCI-e root port
* to allow non-zero devices to enumerate.
*/
out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) | PXP_IGNORE_PCIE_ERRORS);
} else {
/*
* Only scan device 0 on other busses
*/
out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) & ~PXP_IGNORE_PCIE_ERRORS);
}
}
}
#else
static void sb600_set_flag(int bus)
{
}
#endif
static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
void volatile __iomem *addr;
hose = pci_bus_to_host(bus);
if (!hose)
return PCIBIOS_DEVICE_NOT_FOUND;
if (!pa_pxp_offset_valid(bus->number, devfn, offset))
return PCIBIOS_BAD_REGISTER_NUMBER;
if (workaround_5945(bus, devfn, offset, len, val))
return PCIBIOS_SUCCESSFUL;
addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
sb600_set_flag(bus->number);
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
*val = in_8(addr);
break;
case 2:
*val = in_le16(addr);
break;
default:
*val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose;
void volatile __iomem *addr;
hose = pci_bus_to_host(bus);
if (!hose)
return PCIBIOS_DEVICE_NOT_FOUND;
if (!pa_pxp_offset_valid(bus->number, devfn, offset))
return PCIBIOS_BAD_REGISTER_NUMBER;
addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
sb600_set_flag(bus->number);
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
out_8(addr, val);
break;
case 2:
out_le16(addr, val);
break;
default:
out_le32(addr, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops pa_pxp_ops = {
.read = pa_pxp_read_config,
.write = pa_pxp_write_config,
};
static void __init setup_pa_pxp(struct pci_controller *hose)
{
hose->ops = &pa_pxp_ops;
hose->cfg_data = ioremap(0xe0000000, 0x10000000);
}
static int __init pas_add_bridge(struct device_node *dev)
{
struct pci_controller *hose;
pr_debug("Adding PCI host bridge %pOF\n", dev);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
hose->first_busno = 0;
hose->last_busno = 0xff;
hose->controller_ops = pasemi_pci_controller_ops;
setup_pa_pxp(hose);
pr_info("Found PA-PXP PCI host bridge.\n");
/* Interpret the "ranges" property */
pci_process_bridge_OF_ranges(hose, dev, 1);
/*
* Scan for an isa bridge. This is needed to find the SB600 on the nemo
* and does nothing on machines without one.
*/
isa_bridge_find_early(hose);
return 0;
}
void __init pas_pci_init(void)
{
struct device_node *np, *root;
int res;
root = of_find_node_by_path("/");
if (!root) {
pr_crit("pas_pci_init: can't find root of device tree\n");
return;
}
pci_set_flags(PCI_SCAN_ALL_PCIE_DEVS);
np = of_find_compatible_node(root, NULL, "pasemi,rootbus");
if (np) {
res = pas_add_bridge(np);
of_node_put(np);
}
}
void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
{
struct pci_controller *hose;
hose = pci_bus_to_host(dev->bus);
return (void __iomem *)pa_pxp_cfg_addr(hose, dev->bus->number, dev->devfn, offset);
}
struct pci_controller_ops pasemi_pci_controller_ops;