Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
// SPDX-License-Identifier: GPL-2.0-only
/*
 * libata-pmp.c - libata port multiplier support
 *
 * Copyright (c) 2007  SUSE Linux Products GmbH
 * Copyright (c) 2007  Tejun Heo <teheo@suse.de>
 */

#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/libata.h>
#include <linux/slab.h>
#include "libata.h"
#include "libata-transport.h"

const struct ata_port_operations sata_pmp_port_ops = {
	.inherits		= &sata_port_ops,
	.pmp_prereset		= ata_std_prereset,
	.pmp_hardreset		= sata_std_hardreset,
	.pmp_postreset		= ata_std_postreset,
	.error_handler		= sata_pmp_error_handler,
};

/**
 *	sata_pmp_read - read PMP register
 *	@link: link to read PMP register for
 *	@reg: register to read
 *	@r_val: resulting value
 *
 *	Read PMP register.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, AC_ERR_* mask on failure.
 */
static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val)
{
	struct ata_port *ap = link->ap;
	struct ata_device *pmp_dev = ap->link.device;
	struct ata_taskfile tf;
	unsigned int err_mask;

	ata_tf_init(pmp_dev, &tf);
	tf.command = ATA_CMD_PMP_READ;
	tf.protocol = ATA_PROT_NODATA;
	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
	tf.feature = reg;
	tf.device = link->pmp;

	err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
				     SATA_PMP_RW_TIMEOUT);
	if (err_mask)
		return err_mask;

	*r_val = tf.nsect | tf.lbal << 8 | tf.lbam << 16 | tf.lbah << 24;
	return 0;
}

/**
 *	sata_pmp_write - write PMP register
 *	@link: link to write PMP register for
 *	@reg: register to write
 *	@r_val: value to write
 *
 *	Write PMP register.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, AC_ERR_* mask on failure.
 */
static unsigned int sata_pmp_write(struct ata_link *link, int reg, u32 val)
{
	struct ata_port *ap = link->ap;
	struct ata_device *pmp_dev = ap->link.device;
	struct ata_taskfile tf;

	ata_tf_init(pmp_dev, &tf);
	tf.command = ATA_CMD_PMP_WRITE;
	tf.protocol = ATA_PROT_NODATA;
	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
	tf.feature = reg;
	tf.device = link->pmp;
	tf.nsect = val & 0xff;
	tf.lbal = (val >> 8) & 0xff;
	tf.lbam = (val >> 16) & 0xff;
	tf.lbah = (val >> 24) & 0xff;

	return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
				 SATA_PMP_RW_TIMEOUT);
}

/**
 *	sata_pmp_qc_defer_cmd_switch - qc_defer for command switching PMP
 *	@qc: ATA command in question
 *
 *	A host which has command switching PMP support cannot issue
 *	commands to multiple links simultaneously.
 *
 *	LOCKING:
 *	spin_lock_irqsave(host lock)
 *
 *	RETURNS:
 *	ATA_DEFER_* if deferring is needed, 0 otherwise.
 */
int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc)
{
	struct ata_link *link = qc->dev->link;
	struct ata_port *ap = link->ap;

	if (ap->excl_link == NULL || ap->excl_link == link) {
		if (ap->nr_active_links == 0 || ata_link_active(link)) {
			qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
			return ata_std_qc_defer(qc);
		}

		ap->excl_link = link;
	}

	return ATA_DEFER_PORT;
}

/**
 *	sata_pmp_scr_read - read PSCR
 *	@link: ATA link to read PSCR for
 *	@reg: PSCR to read
 *	@r_val: resulting value
 *
 *	Read PSCR @reg into @r_val for @link, to be called from
 *	ata_scr_read().
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *r_val)
{
	unsigned int err_mask;

	if (reg > SATA_PMP_PSCR_CONTROL)
		return -EINVAL;

	err_mask = sata_pmp_read(link, reg, r_val);
	if (err_mask) {
		ata_link_warn(link, "failed to read SCR %d (Emask=0x%x)\n",
			      reg, err_mask);
		return -EIO;
	}
	return 0;
}

/**
 *	sata_pmp_scr_write - write PSCR
 *	@link: ATA link to write PSCR for
 *	@reg: PSCR to write
 *	@val: value to be written
 *
 *	Write @val to PSCR @reg for @link, to be called from
 *	ata_scr_write() and ata_scr_write_flush().
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
{
	unsigned int err_mask;

	if (reg > SATA_PMP_PSCR_CONTROL)
		return -EINVAL;

	err_mask = sata_pmp_write(link, reg, val);
	if (err_mask) {
		ata_link_warn(link, "failed to write SCR %d (Emask=0x%x)\n",
			      reg, err_mask);
		return -EIO;
	}
	return 0;
}

/**
 *	sata_pmp_set_lpm - configure LPM for a PMP link
 *	@link: PMP link to configure LPM for
 *	@policy: target LPM policy
 *	@hints: LPM hints
 *
 *	Configure LPM for @link.  This function will contain any PMP
 *	specific workarounds if necessary.
 *
 *	LOCKING:
 *	EH context.
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
		     unsigned hints)
{
	return sata_link_scr_lpm(link, policy, true);
}

/**
 *	sata_pmp_read_gscr - read GSCR block of SATA PMP
 *	@dev: PMP device
 *	@gscr: buffer to read GSCR block into
 *
 *	Read selected PMP GSCRs from the PMP at @dev.  This will serve
 *	as configuration and identification info for the PMP.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
static int sata_pmp_read_gscr(struct ata_device *dev, u32 *gscr)
{
	static const int gscr_to_read[] = { 0, 1, 2, 32, 33, 64, 96 };
	int i;

	for (i = 0; i < ARRAY_SIZE(gscr_to_read); i++) {
		int reg = gscr_to_read[i];
		unsigned int err_mask;

		err_mask = sata_pmp_read(dev->link, reg, &gscr[reg]);
		if (err_mask) {
			ata_dev_err(dev, "failed to read PMP GSCR[%d] (Emask=0x%x)\n",
				    reg, err_mask);
			return -EIO;
		}
	}

	return 0;
}

static const char *sata_pmp_spec_rev_str(const u32 *gscr)
{
	u32 rev = gscr[SATA_PMP_GSCR_REV];

	if (rev & (1 << 3))
		return "1.2";
	if (rev & (1 << 2))
		return "1.1";
	if (rev & (1 << 1))
		return "1.0";
	return "<unknown>";
}

#define PMP_GSCR_SII_POL 129

static int sata_pmp_configure(struct ata_device *dev, int print_info)
{
	struct ata_port *ap = dev->link->ap;
	u32 *gscr = dev->gscr;
	u16 vendor = sata_pmp_gscr_vendor(gscr);
	u16 devid = sata_pmp_gscr_devid(gscr);
	unsigned int err_mask = 0;
	const char *reason;
	int nr_ports, rc;

	nr_ports = sata_pmp_gscr_ports(gscr);

	if (nr_ports <= 0 || nr_ports > SATA_PMP_MAX_PORTS) {
		rc = -EINVAL;
		reason = "invalid nr_ports";
		goto fail;
	}

	if ((ap->flags & ATA_FLAG_AN) &&
	    (gscr[SATA_PMP_GSCR_FEAT] & SATA_PMP_FEAT_NOTIFY))
		dev->flags |= ATA_DFLAG_AN;

	/* monitor SERR_PHYRDY_CHG on fan-out ports */
	err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_ERROR_EN,
				  SERR_PHYRDY_CHG);
	if (err_mask) {
		rc = -EIO;
		reason = "failed to write GSCR_ERROR_EN";
		goto fail;
	}

	/* Disable sending Early R_OK.
	 * With "cached read" HDD testing and multiple ports busy on a SATA
	 * host controller, 3x26 PMP will very rarely drop a deferred
	 * R_OK that was intended for the host. Symptom will be all
	 * 5 drives under test will timeout, get reset, and recover.
	 */
	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
		u32 reg;

		err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, &reg);
		if (err_mask) {
			rc = -EIO;
			reason = "failed to read Sil3x26 Private Register";
			goto fail;
		}
		reg &= ~0x1;
		err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg);
		if (err_mask) {
			rc = -EIO;
			reason = "failed to write Sil3x26 Private Register";
			goto fail;
		}
	}

	if (print_info) {
		ata_dev_info(dev, "Port Multiplier %s, "
			     "0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
			     sata_pmp_spec_rev_str(gscr), vendor, devid,
			     sata_pmp_gscr_rev(gscr),
			     nr_ports, gscr[SATA_PMP_GSCR_FEAT_EN],
			     gscr[SATA_PMP_GSCR_FEAT]);

		if (!(dev->flags & ATA_DFLAG_AN))
			ata_dev_info(dev,
				"Asynchronous notification not supported, "
				"hotplug won't work on fan-out ports. Use warm-plug instead.\n");
	}

	return 0;

 fail:
	ata_dev_err(dev,
		    "failed to configure Port Multiplier (%s, Emask=0x%x)\n",
		    reason, err_mask);
	return rc;
}

static int sata_pmp_init_links (struct ata_port *ap, int nr_ports)
{
	struct ata_link *pmp_link = ap->pmp_link;
	int i, err;

	if (!pmp_link) {
		pmp_link = kcalloc(SATA_PMP_MAX_PORTS, sizeof(pmp_link[0]),
				   GFP_NOIO);
		if (!pmp_link)
			return -ENOMEM;

		for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
			ata_link_init(ap, &pmp_link[i], i);

		ap->pmp_link = pmp_link;

		for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
			err = ata_tlink_add(&pmp_link[i]);
			if (err) {
				goto err_tlink;
			}
		}
	}

	for (i = 0; i < nr_ports; i++) {
		struct ata_link *link = &pmp_link[i];
		struct ata_eh_context *ehc = &link->eh_context;

		link->flags = 0;
		ehc->i.probe_mask |= ATA_ALL_DEVICES;
		ehc->i.action |= ATA_EH_RESET;
	}

	return 0;
  err_tlink:
	while (--i >= 0)
		ata_tlink_delete(&pmp_link[i]);
	kfree(pmp_link);
	ap->pmp_link = NULL;
	return err;
}

static void sata_pmp_quirks(struct ata_port *ap)
{
	u32 *gscr = ap->link.device->gscr;
	u16 vendor = sata_pmp_gscr_vendor(gscr);
	u16 devid = sata_pmp_gscr_devid(gscr);
	struct ata_link *link;

	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
		/* sil3x26 quirks */
		ata_for_each_link(link, ap, EDGE) {
			/* link reports offline after LPM */
			link->flags |= ATA_LFLAG_NO_LPM;

			/*
			 * Class code report is unreliable and SRST times
			 * out under certain configurations.
			 */
			if (link->pmp < 5)
				link->flags |= ATA_LFLAG_NO_SRST |
					       ATA_LFLAG_ASSUME_ATA;

			/* port 5 is for SEMB device and it doesn't like SRST */
			if (link->pmp == 5)
				link->flags |= ATA_LFLAG_NO_SRST |
					       ATA_LFLAG_ASSUME_SEMB;
		}
	} else if (vendor == 0x1095 && devid == 0x4723) {
		/*
		 * sil4723 quirks
		 *
		 * Link reports offline after LPM.  Class code report is
		 * unreliable.  SIMG PMPs never got SRST reliable and the
		 * config device at port 2 locks up on SRST.
		 */
		ata_for_each_link(link, ap, EDGE)
			link->flags |= ATA_LFLAG_NO_LPM |
				       ATA_LFLAG_NO_SRST |
				       ATA_LFLAG_ASSUME_ATA;
	} else if (vendor == 0x1095 && devid == 0x4726) {
		/* sil4726 quirks */
		ata_for_each_link(link, ap, EDGE) {
			/* link reports offline after LPM */
			link->flags |= ATA_LFLAG_NO_LPM;

			/* Class code report is unreliable and SRST
			 * times out under certain configurations.
			 * Config device can be at port 0 or 5 and
			 * locks up on SRST.
			 */
			if (link->pmp <= 5)
				link->flags |= ATA_LFLAG_NO_SRST |
					       ATA_LFLAG_ASSUME_ATA;

			/* Port 6 is for SEMB device which doesn't
			 * like SRST either.
			 */
			if (link->pmp == 6)
				link->flags |= ATA_LFLAG_NO_SRST |
					       ATA_LFLAG_ASSUME_SEMB;
		}
	} else if (vendor == 0x1095 && (devid == 0x5723 || devid == 0x5733 ||
					devid == 0x5734 || devid == 0x5744)) {
		/* sil5723/5744 quirks */

		/* sil5723/5744 has either two or three downstream
		 * ports depending on operation mode.  The last port
		 * is empty if any actual IO device is available or
		 * occupied by a pseudo configuration device
		 * otherwise.  Don't try hard to recover it.
		 */
		ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
	} else if (vendor == 0x197b && (devid == 0x2352 || devid == 0x0325)) {
		/*
		 * 0x2352: found in Thermaltake BlackX Duet, jmicron JMB350?
		 * 0x0325: jmicron JMB394.
		 */
		ata_for_each_link(link, ap, EDGE) {
			/* SRST breaks detection and disks get misclassified
			 * LPM disabled to avoid potential problems
			 */
			link->flags |= ATA_LFLAG_NO_LPM |
				       ATA_LFLAG_NO_SRST |
				       ATA_LFLAG_ASSUME_ATA;
		}
	} else if (vendor == 0x11ab && devid == 0x4140) {
		/* Marvell 4140 quirks */
		ata_for_each_link(link, ap, EDGE) {
			/* port 4 is for SEMB device and it doesn't like SRST */
			if (link->pmp == 4)
				link->flags |= ATA_LFLAG_DISABLED;
		}
	}
}

/**
 *	sata_pmp_attach - attach a SATA PMP device
 *	@dev: SATA PMP device to attach
 *
 *	Configure and attach SATA PMP device @dev.  This function is
 *	also responsible for allocating and initializing PMP links.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
int sata_pmp_attach(struct ata_device *dev)
{
	struct ata_link *link = dev->link;
	struct ata_port *ap = link->ap;
	unsigned long flags;
	struct ata_link *tlink;
	int rc;

	/* is it hanging off the right place? */
	if (!sata_pmp_supported(ap)) {
		ata_dev_err(dev, "host does not support Port Multiplier\n");
		return -EINVAL;
	}

	if (!ata_is_host_link(link)) {
		ata_dev_err(dev, "Port Multipliers cannot be nested\n");
		return -EINVAL;
	}

	if (dev->devno) {
		ata_dev_err(dev, "Port Multiplier must be the first device\n");
		return -EINVAL;
	}

	WARN_ON(link->pmp != 0);
	link->pmp = SATA_PMP_CTRL_PORT;

	/* read GSCR block */
	rc = sata_pmp_read_gscr(dev, dev->gscr);
	if (rc)
		goto fail;

	/* config PMP */
	rc = sata_pmp_configure(dev, 1);
	if (rc)
		goto fail;

	rc = sata_pmp_init_links(ap, sata_pmp_gscr_ports(dev->gscr));
	if (rc) {
		ata_dev_info(dev, "failed to initialize PMP links\n");
		goto fail;
	}

	/* attach it */
	spin_lock_irqsave(ap->lock, flags);
	WARN_ON(ap->nr_pmp_links);
	ap->nr_pmp_links = sata_pmp_gscr_ports(dev->gscr);
	spin_unlock_irqrestore(ap->lock, flags);

	sata_pmp_quirks(ap);

	if (ap->ops->pmp_attach)
		ap->ops->pmp_attach(ap);

	ata_for_each_link(tlink, ap, EDGE)
		sata_link_init_spd(tlink);

	return 0;

 fail:
	link->pmp = 0;
	return rc;
}

/**
 *	sata_pmp_detach - detach a SATA PMP device
 *	@dev: SATA PMP device to detach
 *
 *	Detach SATA PMP device @dev.  This function is also
 *	responsible for deconfiguring PMP links.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 */
static void sata_pmp_detach(struct ata_device *dev)
{
	struct ata_link *link = dev->link;
	struct ata_port *ap = link->ap;
	struct ata_link *tlink;
	unsigned long flags;

	ata_dev_info(dev, "Port Multiplier detaching\n");

	WARN_ON(!ata_is_host_link(link) || dev->devno ||
		link->pmp != SATA_PMP_CTRL_PORT);

	if (ap->ops->pmp_detach)
		ap->ops->pmp_detach(ap);

	ata_for_each_link(tlink, ap, EDGE)
		ata_eh_detach_dev(tlink->device);

	spin_lock_irqsave(ap->lock, flags);
	ap->nr_pmp_links = 0;
	link->pmp = 0;
	spin_unlock_irqrestore(ap->lock, flags);
}

/**
 *	sata_pmp_same_pmp - does new GSCR matches the configured PMP?
 *	@dev: PMP device to compare against
 *	@new_gscr: GSCR block of the new device
 *
 *	Compare @new_gscr against @dev and determine whether @dev is
 *	the PMP described by @new_gscr.
 *
 *	LOCKING:
 *	None.
 *
 *	RETURNS:
 *	1 if @dev matches @new_gscr, 0 otherwise.
 */
static int sata_pmp_same_pmp(struct ata_device *dev, const u32 *new_gscr)
{
	const u32 *old_gscr = dev->gscr;
	u16 old_vendor, new_vendor, old_devid, new_devid;
	int old_nr_ports, new_nr_ports;

	old_vendor = sata_pmp_gscr_vendor(old_gscr);
	new_vendor = sata_pmp_gscr_vendor(new_gscr);
	old_devid = sata_pmp_gscr_devid(old_gscr);
	new_devid = sata_pmp_gscr_devid(new_gscr);
	old_nr_ports = sata_pmp_gscr_ports(old_gscr);
	new_nr_ports = sata_pmp_gscr_ports(new_gscr);

	if (old_vendor != new_vendor) {
		ata_dev_info(dev,
			     "Port Multiplier vendor mismatch '0x%x' != '0x%x'\n",
			     old_vendor, new_vendor);
		return 0;
	}

	if (old_devid != new_devid) {
		ata_dev_info(dev,
			     "Port Multiplier device ID mismatch '0x%x' != '0x%x'\n",
			     old_devid, new_devid);
		return 0;
	}

	if (old_nr_ports != new_nr_ports) {
		ata_dev_info(dev,
			     "Port Multiplier nr_ports mismatch '0x%x' != '0x%x'\n",
			     old_nr_ports, new_nr_ports);
		return 0;
	}

	return 1;
}

/**
 *	sata_pmp_revalidate - revalidate SATA PMP
 *	@dev: PMP device to revalidate
 *	@new_class: new class code
 *
 *	Re-read GSCR block and make sure @dev is still attached to the
 *	port and properly configured.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno otherwise.
 */
static int sata_pmp_revalidate(struct ata_device *dev, unsigned int new_class)
{
	struct ata_link *link = dev->link;
	struct ata_port *ap = link->ap;
	u32 *gscr = (void *)ap->sector_buf;
	int rc;

	DPRINTK("ENTER\n");

	ata_eh_about_to_do(link, NULL, ATA_EH_REVALIDATE);

	if (!ata_dev_enabled(dev)) {
		rc = -ENODEV;
		goto fail;
	}

	/* wrong class? */
	if (ata_class_enabled(new_class) && new_class != ATA_DEV_PMP) {
		rc = -ENODEV;
		goto fail;
	}

	/* read GSCR */
	rc = sata_pmp_read_gscr(dev, gscr);
	if (rc)
		goto fail;

	/* is the pmp still there? */
	if (!sata_pmp_same_pmp(dev, gscr)) {
		rc = -ENODEV;
		goto fail;
	}

	memcpy(dev->gscr, gscr, sizeof(gscr[0]) * SATA_PMP_GSCR_DWORDS);

	rc = sata_pmp_configure(dev, 0);
	if (rc)
		goto fail;

	ata_eh_done(link, NULL, ATA_EH_REVALIDATE);

	DPRINTK("EXIT, rc=0\n");
	return 0;

 fail:
	ata_dev_err(dev, "PMP revalidation failed (errno=%d)\n", rc);
	DPRINTK("EXIT, rc=%d\n", rc);
	return rc;
}

/**
 *	sata_pmp_revalidate_quick - revalidate SATA PMP quickly
 *	@dev: PMP device to revalidate
 *
 *	Make sure the attached PMP is accessible.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno otherwise.
 */
static int sata_pmp_revalidate_quick(struct ata_device *dev)
{
	unsigned int err_mask;
	u32 prod_id;

	err_mask = sata_pmp_read(dev->link, SATA_PMP_GSCR_PROD_ID, &prod_id);
	if (err_mask) {
		ata_dev_err(dev,
			    "failed to read PMP product ID (Emask=0x%x)\n",
			    err_mask);
		return -EIO;
	}

	if (prod_id != dev->gscr[SATA_PMP_GSCR_PROD_ID]) {
		ata_dev_err(dev, "PMP product ID mismatch\n");
		/* something weird is going on, request full PMP recovery */
		return -EIO;
	}

	return 0;
}

/**
 *	sata_pmp_eh_recover_pmp - recover PMP
 *	@ap: ATA port PMP is attached to
 *	@prereset: prereset method (can be NULL)
 *	@softreset: softreset method
 *	@hardreset: hardreset method
 *	@postreset: postreset method (can be NULL)
 *
 *	Recover PMP attached to @ap.  Recovery procedure is somewhat
 *	similar to that of ata_eh_recover() except that reset should
 *	always be performed in hard->soft sequence and recovery
 *	failure results in PMP detachment.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
		ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
		ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
{
	struct ata_link *link = &ap->link;
	struct ata_eh_context *ehc = &link->eh_context;
	struct ata_device *dev = link->device;
	int tries = ATA_EH_PMP_TRIES;
	int detach = 0, rc = 0;
	int reval_failed = 0;

	DPRINTK("ENTER\n");

	if (dev->flags & ATA_DFLAG_DETACH) {
		detach = 1;
		goto fail;
	}

 retry:
	ehc->classes[0] = ATA_DEV_UNKNOWN;

	if (ehc->i.action & ATA_EH_RESET) {
		struct ata_link *tlink;

		/* reset */
		rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
				  postreset);
		if (rc) {
			ata_link_err(link, "failed to reset PMP, giving up\n");
			goto fail;
		}

		/* PMP is reset, SErrors cannot be trusted, scan all */
		ata_for_each_link(tlink, ap, EDGE) {
			struct ata_eh_context *ehc = &tlink->eh_context;

			ehc->i.probe_mask |= ATA_ALL_DEVICES;
			ehc->i.action |= ATA_EH_RESET;
		}
	}

	/* If revalidation is requested, revalidate and reconfigure;
	 * otherwise, do quick revalidation.
	 */
	if (ehc->i.action & ATA_EH_REVALIDATE)
		rc = sata_pmp_revalidate(dev, ehc->classes[0]);
	else
		rc = sata_pmp_revalidate_quick(dev);

	if (rc) {
		tries--;

		if (rc == -ENODEV) {
			ehc->i.probe_mask |= ATA_ALL_DEVICES;
			detach = 1;
			/* give it just two more chances */
			tries = min(tries, 2);
		}

		if (tries) {
			/* consecutive revalidation failures? speed down */
			if (reval_failed)
				sata_down_spd_limit(link, 0);
			else
				reval_failed = 1;

			ehc->i.action |= ATA_EH_RESET;
			goto retry;
		} else {
			ata_dev_err(dev,
				    "failed to recover PMP after %d tries, giving up\n",
				    ATA_EH_PMP_TRIES);
			goto fail;
		}
	}

	/* okay, PMP resurrected */
	ehc->i.flags = 0;

	DPRINTK("EXIT, rc=0\n");
	return 0;

 fail:
	sata_pmp_detach(dev);
	if (detach)
		ata_eh_detach_dev(dev);
	else
		ata_dev_disable(dev);

	DPRINTK("EXIT, rc=%d\n", rc);
	return rc;
}

static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap)
{
	struct ata_link *link;
	unsigned long flags;
	int rc;

	spin_lock_irqsave(ap->lock, flags);

	ata_for_each_link(link, ap, EDGE) {
		if (!(link->flags & ATA_LFLAG_DISABLED))
			continue;

		spin_unlock_irqrestore(ap->lock, flags);

		/* Some PMPs require hardreset sequence to get
		 * SError.N working.
		 */
		sata_link_hardreset(link, sata_deb_timing_normal,
				ata_deadline(jiffies, ATA_TMOUT_INTERNAL_QUICK),
				NULL, NULL);

		/* unconditionally clear SError.N */
		rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
		if (rc) {
			ata_link_err(link,
				     "failed to clear SError.N (errno=%d)\n",
				     rc);
			return rc;
		}

		spin_lock_irqsave(ap->lock, flags);
	}

	spin_unlock_irqrestore(ap->lock, flags);

	return 0;
}

static int sata_pmp_handle_link_fail(struct ata_link *link, int *link_tries)
{
	struct ata_port *ap = link->ap;
	unsigned long flags;

	if (link_tries[link->pmp] && --link_tries[link->pmp])
		return 1;

	/* disable this link */
	if (!(link->flags & ATA_LFLAG_DISABLED)) {
		ata_link_warn(link,
			"failed to recover link after %d tries, disabling\n",
			ATA_EH_PMP_LINK_TRIES);

		spin_lock_irqsave(ap->lock, flags);
		link->flags |= ATA_LFLAG_DISABLED;
		spin_unlock_irqrestore(ap->lock, flags);
	}

	ata_dev_disable(link->device);
	link->eh_context.i.action = 0;

	return 0;
}

/**
 *	sata_pmp_eh_recover - recover PMP-enabled port
 *	@ap: ATA port to recover
 *
 *	Drive EH recovery operation for PMP enabled port @ap.  This
 *	function recovers host and PMP ports with proper retrials and
 *	fallbacks.  Actual recovery operations are performed using
 *	ata_eh_recover() and sata_pmp_eh_recover_pmp().
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 *
 *	RETURNS:
 *	0 on success, -errno on failure.
 */
static int sata_pmp_eh_recover(struct ata_port *ap)
{
	struct ata_port_operations *ops = ap->ops;
	int pmp_tries, link_tries[SATA_PMP_MAX_PORTS];
	struct ata_link *pmp_link = &ap->link;
	struct ata_device *pmp_dev = pmp_link->device;
	struct ata_eh_context *pmp_ehc = &pmp_link->eh_context;
	u32 *gscr = pmp_dev->gscr;
	struct ata_link *link;
	struct ata_device *dev;
	unsigned int err_mask;
	u32 gscr_error, sntf;
	int cnt, rc;

	pmp_tries = ATA_EH_PMP_TRIES;
	ata_for_each_link(link, ap, EDGE)
		link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES;

 retry:
	/* PMP attached? */
	if (!sata_pmp_attached(ap)) {
		rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
				    ops->hardreset, ops->postreset, NULL);
		if (rc) {
			ata_for_each_dev(dev, &ap->link, ALL)
				ata_dev_disable(dev);
			return rc;
		}

		if (pmp_dev->class != ATA_DEV_PMP)
			return 0;

		/* new PMP online */
		ata_for_each_link(link, ap, EDGE)
			link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES;

		/* fall through */
	}

	/* recover pmp */
	rc = sata_pmp_eh_recover_pmp(ap, ops->prereset, ops->softreset,
				     ops->hardreset, ops->postreset);
	if (rc)
		goto pmp_fail;

	/* PHY event notification can disturb reset and other recovery
	 * operations.  Turn it off.
	 */
	if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
		gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;

		err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
					  gscr[SATA_PMP_GSCR_FEAT_EN]);
		if (err_mask) {
			ata_link_warn(pmp_link,
				"failed to disable NOTIFY (err_mask=0x%x)\n",
				err_mask);
			goto pmp_fail;
		}
	}

	/* handle disabled links */
	rc = sata_pmp_eh_handle_disabled_links(ap);
	if (rc)
		goto pmp_fail;

	/* recover links */
	rc = ata_eh_recover(ap, ops->pmp_prereset, ops->pmp_softreset,
			    ops->pmp_hardreset, ops->pmp_postreset, &link);
	if (rc)
		goto link_fail;

	/* clear SNotification */
	rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf);
	if (rc == 0)
		sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);

	/*
	 * If LPM is active on any fan-out port, hotplug wouldn't
	 * work.  Return w/ PHY event notification disabled.
	 */
	ata_for_each_link(link, ap, EDGE)
		if (link->lpm_policy > ATA_LPM_MAX_POWER)
			return 0;

	/*
	 * Connection status might have changed while resetting other
	 * links, enable notification and check SATA_PMP_GSCR_ERROR
	 * before returning.
	 */

	/* enable notification */
	if (pmp_dev->flags & ATA_DFLAG_AN) {
		gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;

		err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
					  gscr[SATA_PMP_GSCR_FEAT_EN]);
		if (err_mask) {
			ata_dev_err(pmp_dev,
				    "failed to write PMP_FEAT_EN (Emask=0x%x)\n",
				    err_mask);
			rc = -EIO;
			goto pmp_fail;
		}
	}

	/* check GSCR_ERROR */
	err_mask = sata_pmp_read(pmp_link, SATA_PMP_GSCR_ERROR, &gscr_error);
	if (err_mask) {
		ata_dev_err(pmp_dev,
			    "failed to read PMP_GSCR_ERROR (Emask=0x%x)\n",
			    err_mask);
		rc = -EIO;
		goto pmp_fail;
	}

	cnt = 0;
	ata_for_each_link(link, ap, EDGE) {
		if (!(gscr_error & (1 << link->pmp)))
			continue;

		if (sata_pmp_handle_link_fail(link, link_tries)) {
			ata_ehi_hotplugged(&link->eh_context.i);
			cnt++;
		} else {
			ata_link_warn(link,
				"PHY status changed but maxed out on retries, giving up\n");
			ata_link_warn(link,
				"Manually issue scan to resume this link\n");
		}
	}

	if (cnt) {
		ata_port_info(ap,
			"PMP SError.N set for some ports, repeating recovery\n");
		goto retry;
	}

	return 0;

 link_fail:
	if (sata_pmp_handle_link_fail(link, link_tries)) {
		pmp_ehc->i.action |= ATA_EH_RESET;
		goto retry;
	}

	/* fall through */
 pmp_fail:
	/* Control always ends up here after detaching PMP.  Shut up
	 * and return if we're unloading.
	 */
	if (ap->pflags & ATA_PFLAG_UNLOADING)
		return rc;

	if (!sata_pmp_attached(ap))
		goto retry;

	if (--pmp_tries) {
		pmp_ehc->i.action |= ATA_EH_RESET;
		goto retry;
	}

	ata_port_err(ap, "failed to recover PMP after %d tries, giving up\n",
		     ATA_EH_PMP_TRIES);
	sata_pmp_detach(pmp_dev);
	ata_dev_disable(pmp_dev);

	return rc;
}

/**
 *	sata_pmp_error_handler - do standard error handling for PMP-enabled host
 *	@ap: host port to handle error for
 *
 *	Perform standard error handling sequence for PMP-enabled host
 *	@ap.
 *
 *	LOCKING:
 *	Kernel thread context (may sleep).
 */
void sata_pmp_error_handler(struct ata_port *ap)
{
	ata_eh_autopsy(ap);
	ata_eh_report(ap);
	sata_pmp_eh_recover(ap);
	ata_eh_finish(ap);
}

EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
EXPORT_SYMBOL_GPL(sata_pmp_error_handler);