// SPDX-License-Identifier: GPL-2.0-or-later
/*
* mxl111sf-phy.c - driver for the MaxLinear MXL111SF
*
* Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*/
#include "mxl111sf-phy.h"
#include "mxl111sf-reg.h"
int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
{
struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
{0x07, 0xff, 0x0c},
{0x58, 0xff, 0x9d},
{0x09, 0xff, 0x00},
{0x06, 0xff, 0x06},
{0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
{0x8d, 0x01, 0x01}, /* NEGATE_Q */
{0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
{0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
{0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
{0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
{0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
{0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
{0x88, 0xff, 0xf0}, /* INF_THD = 240 */
{0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
{0x00, 0xff, 0x01}, /* Change to page 1 */
{0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
{0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
{0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
{0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
{0x00, 0xff, 0x00}, /* Change to page 0 */
{0, 0, 0}
};
mxl_debug("()");
return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
}
int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
{
int ret;
mxl_debug("()");
ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
if (mxl_fail(ret))
goto fail;
ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
mxl_fail(ret);
fail:
return ret;
}
int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
{
int ret;
mxl_debug("(%s)", MXL_SOC_MODE == mode ?
"MXL_SOC_MODE" : "MXL_TUNER_MODE");
/* set device mode */
ret = mxl111sf_write_reg(state, 0x03,
MXL_SOC_MODE == mode ? 0x01 : 0x00);
if (mxl_fail(ret))
goto fail;
ret = mxl111sf_write_reg_mask(state,
0x7d, 0x40, MXL_SOC_MODE == mode ?
0x00 : /* enable impulse noise filter,
INF_BYP = 0 */
0x40); /* disable impulse noise filter,
INF_BYP = 1 */
if (mxl_fail(ret))
goto fail;
state->device_mode = mode;
fail:
return ret;
}
/* power up tuner */
int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
{
mxl_debug("(%d)", onoff);
return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
}
int mxl111sf_disable_656_port(struct mxl111sf_state *state)
{
mxl_debug("()");
return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
}
int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
{
mxl_debug("()");
return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
}
/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
unsigned int parallel_serial,
unsigned int msb_lsb_1st,
unsigned int clock_phase,
unsigned int mpeg_valid_pol,
unsigned int mpeg_sync_pol)
{
int ret;
u8 mode, tmp;
mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
clock_phase, mpeg_valid_pol, mpeg_sync_pol);
/* Enable PIN MUX */
ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
mxl_fail(ret);
/* Configure MPEG Clock phase */
mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
if (clock_phase == TSIF_NORMAL)
mode &= ~V6_INVERTED_CLK_PHASE;
else
mode |= V6_INVERTED_CLK_PHASE;
ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
mxl_fail(ret);
/* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
* Get current configuration */
ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
mxl_fail(ret);
/* Data Input mode */
if (parallel_serial == TSIF_INPUT_PARALLEL) {
/* Disable serial mode */
mode &= ~V6_MPEG_IN_DATA_SERIAL;
/* Enable Parallel mode */
mode |= V6_MPEG_IN_DATA_PARALLEL;
} else {
/* Disable Parallel mode */
mode &= ~V6_MPEG_IN_DATA_PARALLEL;
/* Enable Serial Mode */
mode |= V6_MPEG_IN_DATA_SERIAL;
/* If serial interface is chosen, configure
MSB or LSB order in transmission */
ret = mxl111sf_read_reg(state,
V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
&tmp);
mxl_fail(ret);
if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
tmp |= V6_MPEG_SER_MSB_FIRST;
else
tmp &= ~V6_MPEG_SER_MSB_FIRST;
ret = mxl111sf_write_reg(state,
V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
tmp);
mxl_fail(ret);
}
/* MPEG Sync polarity */
if (mpeg_sync_pol == TSIF_NORMAL)
mode &= ~V6_INVERTED_MPEG_SYNC;
else
mode |= V6_INVERTED_MPEG_SYNC;
/* MPEG Valid polarity */
if (mpeg_valid_pol == 0)
mode &= ~V6_INVERTED_MPEG_VALID;
else
mode |= V6_INVERTED_MPEG_VALID;
ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
mxl_fail(ret);
return ret;
}
int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
{
static struct mxl111sf_reg_ctrl_info init_i2s[] = {
{0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
{0x15, 0x60, 0x60}, /* Enable I2S */
{0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
Inverted 656 Clock, I2S_SOFT_RESET,
0 : Normal operation, 1 : Reset State */
#if 0
{0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
#endif
{0x00, 0xff, 0x02}, /* Change to Control Page */
{0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
{0x00, 0xff, 0x00},
{0, 0, 0}
};
int ret;
mxl_debug("(0x%02x)", sample_size);
ret = mxl111sf_ctrl_program_regs(state, init_i2s);
if (mxl_fail(ret))
goto fail;
ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
mxl_fail(ret);
fail:
return ret;
}
int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
{
static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
{0x15, 0x40, 0x00},
{0, 0, 0}
};
mxl_debug("()");
return mxl111sf_ctrl_program_regs(state, disable_i2s);
}
int mxl111sf_config_i2s(struct mxl111sf_state *state,
u8 msb_start_pos, u8 data_width)
{
int ret;
u8 tmp;
mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
if (mxl_fail(ret))
goto fail;
tmp &= 0xe0;
tmp |= msb_start_pos;
ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
if (mxl_fail(ret))
goto fail;
ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
if (mxl_fail(ret))
goto fail;
tmp &= 0xe0;
tmp |= data_width;
ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
mxl_fail(ret);
fail:
return ret;
}
int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
{
u8 val;
int ret;
mxl_debug("(%d)", onoff);
ret = mxl111sf_write_reg(state, 0x00, 0x02);
if (mxl_fail(ret))
goto fail;
ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
if (mxl_fail(ret))
goto fail;
if (onoff)
val |= 0x04;
else
val &= ~0x04;
ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
if (mxl_fail(ret))
goto fail;
ret = mxl111sf_write_reg(state, 0x00, 0x00);
mxl_fail(ret);
fail:
return ret;
}
int mxl111sf_idac_config(struct mxl111sf_state *state,
u8 control_mode, u8 current_setting,
u8 current_value, u8 hysteresis_value)
{
int ret;
u8 val;
/* current value will be set for both automatic & manual IDAC control */
val = current_value;
if (control_mode == IDAC_MANUAL_CONTROL) {
/* enable manual control of IDAC */
val |= IDAC_MANUAL_CONTROL_BIT_MASK;
if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
/* enable current sinking in manual mode */
val |= IDAC_CURRENT_SINKING_BIT_MASK;
else
/* disable current sinking in manual mode */
val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
} else {
/* disable manual control of IDAC */
val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
/* set hysteresis value reg: 0x0B<5:0> */
ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
(hysteresis_value & 0x3F));
mxl_fail(ret);
}
ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
mxl_fail(ret);
return ret;
}