Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

# SPDX-License-Identifier: GPL-2.0-only
config CONFIG_INTEL_POWERCLAMP
	tristate "Intel PowerClamp idle injection driver"
	depends on CONFIG_X86
	depends on CONFIG_CPU_SUP_INTEL
	help
	  Enable this to enable Intel PowerClamp idle injection driver. This
	  enforce idle time which results in more package CONFIG_C-state residency. The
	  user interface is exposed via generic thermal framework.

config CONFIG_X86_PKG_TEMP_THERMAL
	tristate "X86 package temperature thermal driver"
	depends on CONFIG_X86_THERMAL_VECTOR
	select CONFIG_THERMAL_GOV_USER_SPACE
	select CONFIG_THERMAL_WRITABLE_TRIPS
	default m
	help
	  Enable this to register CPU digital sensor for package temperature as
	  thermal zone. Each package will have its own thermal zone. There are
	  two trip points which can be set by user to get notifications via thermal
	  notification methods.

config CONFIG_INTEL_SOC_DTS_IOSF_CORE
	tristate
	depends on CONFIG_X86 && CONFIG_PCI
	select CONFIG_IOSF_MBI
	help
	  This is becoming a common feature for Intel SoCs to expose the additional
	  digital temperature sensors (DTSs) using side band interface (IOSF). This
	  implements the common set of helper functions to register, get temperature
	  and get/set thresholds on DTSs.

config CONFIG_INTEL_SOC_DTS_THERMAL
	tristate "Intel SoCs DTS thermal driver"
	depends on CONFIG_X86 && CONFIG_PCI && CONFIG_ACPI
	select CONFIG_INTEL_SOC_DTS_IOSF_CORE
	select CONFIG_THERMAL_WRITABLE_TRIPS
	help
	  Enable this to register Intel SoCs (e.g. Bay Trail) platform digital
	  temperature sensor (DTS). These SoCs have two additional DTSs in
	  addition to DTSs on CPU cores. Each DTS will be registered as a
	  thermal zone. There are two trip points. One of the trip point can
	  be set by user mode programs to get notifications via Linux thermal
	  notification methods.The other trip is a critical trip point, which
	  was set by the driver based on the TJ MAX temperature.

config CONFIG_INTEL_QUARK_DTS_THERMAL
	tristate "Intel Quark DTS thermal driver"
	depends on CONFIG_X86_INTEL_QUARK
	help
	  Enable this to register Intel Quark SoC (e.g. X1000) platform digital
	  temperature sensor (DTS). For X1000 SoC, it has one on-die DTS.
	  The DTS will be registered as a thermal zone. There are two trip points:
	  hot & critical. The critical trip point default value is set by
	  underlying BIOS/Firmware.

menu "ACPI INT340X thermal drivers"
source "drivers/thermal/intel/int340x_thermal/Kconfig"
endmenu

config CONFIG_INTEL_BXT_PMIC_THERMAL
	tristate "Intel Broxton PMIC thermal driver"
	depends on CONFIG_X86 && CONFIG_INTEL_SOC_PMIC_BXTWC && CONFIG_REGMAP
	help
	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
	  system temperature measurements and alerts.
	  This driver is used for monitoring the ADC channels of PMIC and handles
	  the alert trip point interrupts and notifies the thermal framework with
	  the trip point and temperature details of the zone.

config CONFIG_INTEL_PCH_THERMAL
	tristate "Intel PCH Thermal Reporting Driver"
	depends on CONFIG_X86 && CONFIG_PCI
	help
	  Enable this to support thermal reporting on certain intel PCHs.
	  Thermal reporting device will provide temperature reading,
	  programmable trip points and other information.