Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /Documentation/devicetree/bindings/net/dsa/ksz.txt 
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
Microchip KSZ Series Ethernet switches
==================================

Required properties:

- compatible: For external switch chips, compatible string must be exactly one
  of the following:
  - "microchip,ksz8765"
  - "microchip,ksz8794"
  - "microchip,ksz8795"
  - "microchip,ksz9477"
  - "microchip,ksz9897"
  - "microchip,ksz9896"
  - "microchip,ksz9567"
  - "microchip,ksz8565"
  - "microchip,ksz9893"
  - "microchip,ksz9563"
  - "microchip,ksz8563"

Optional properties:

- reset-gpios		: Should be a gpio specifier for a reset line
- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
			  125MHz instead of 25MHz.

See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.

Examples:

Ethernet switch connected via SPI to the host, CPU port wired to eth0:

	eth0: ethernet@10001000 {
		fixed-link {
			speed = <1000>;
			full-duplex;
		};
	};

	spi1: spi@f8008000 {
		pinctrl-0 = <&pinctrl_spi_ksz>;
		cs-gpios = <&pioC 25 0>;
		id = <1>;

		ksz9477: ksz9477@0 {
			compatible = "microchip,ksz9477";
			reg = <0>;

			spi-max-frequency = <44000000>;
			spi-cpha;
			spi-cpol;

			ports {
				#address-cells = <1>;
				#size-cells = <0>;
				port@0 {
					reg = <0>;
					label = "lan1";
				};
				port@1 {
					reg = <1>;
					label = "lan2";
				};
				port@2 {
					reg = <2>;
					label = "lan3";
				};
				port@3 {
					reg = <3>;
					label = "lan4";
				};
				port@4 {
					reg = <4>;
					label = "lan5";
				};
				port@5 {
					reg = <5>;
					label = "cpu";
					ethernet = <&eth0>;
					fixed-link {
						speed = <1000>;
						full-duplex;
					};
				};
			};
		};
		ksz8565: ksz8565@0 {
			compatible = "microchip,ksz8565";
			reg = <0>;

			spi-max-frequency = <44000000>;
			spi-cpha;
			spi-cpol;

			ports {
				#address-cells = <1>;
				#size-cells = <0>;
				port@0 {
					reg = <0>;
					label = "lan1";
				};
				port@1 {
					reg = <1>;
					label = "lan2";
				};
				port@2 {
					reg = <2>;
					label = "lan3";
				};
				port@3 {
					reg = <3>;
					label = "lan4";
				};
				port@6 {
					reg = <6>;
					label = "cpu";
					ethernet = <&eth0>;
					fixed-link {
						speed = <1000>;
						full-duplex;
					};
				};
			};
		};
	};