.. Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
.. _camera-controls:
************************
Camera Control Reference
************************
The Camera class includes controls for mechanical (or equivalent
digital) features of a device such as controllable lenses or sensors.
.. _camera-control-id:
Camera Control IDs
==================
``V4L2_CID_CAMERA_CLASS (class)``
The Camera class descriptor. Calling
:ref:`VIDIOC_QUERYCTRL` for this control will
return a description of this control class.
.. _v4l2-exposure-auto-type:
``V4L2_CID_EXPOSURE_AUTO``
(enum)
enum v4l2_exposure_auto_type -
Enables automatic adjustments of the exposure time and/or iris
aperture. The effect of manual changes of the exposure time or iris
aperture while these features are enabled is undefined, drivers
should ignore such requests. Possible values are:
.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_EXPOSURE_AUTO``
- Automatic exposure time, automatic iris aperture.
* - ``V4L2_EXPOSURE_MANUAL``
- Manual exposure time, manual iris.
* - ``V4L2_EXPOSURE_SHUTTER_PRIORITY``
- Manual exposure time, auto iris.
* - ``V4L2_EXPOSURE_APERTURE_PRIORITY``
- Auto exposure time, manual iris.
``V4L2_CID_EXPOSURE_ABSOLUTE (integer)``
Determines the exposure time of the camera sensor. The exposure time
is limited by the frame interval. Drivers should interpret the
values as 100 µs units, where the value 1 stands for 1/10000th of a
second, 10000 for 1 second and 100000 for 10 seconds.
``V4L2_CID_EXPOSURE_AUTO_PRIORITY (boolean)``
When ``V4L2_CID_EXPOSURE_AUTO`` is set to ``AUTO`` or
``APERTURE_PRIORITY``, this control determines if the device may
dynamically vary the frame rate. By default this feature is disabled
(0) and the frame rate must remain constant.
``V4L2_CID_AUTO_EXPOSURE_BIAS (integer menu)``
Determines the automatic exposure compensation, it is effective only
when ``V4L2_CID_EXPOSURE_AUTO`` control is set to ``AUTO``,
``SHUTTER_PRIORITY`` or ``APERTURE_PRIORITY``. It is expressed in
terms of EV, drivers should interpret the values as 0.001 EV units,
where the value 1000 stands for +1 EV.
Increasing the exposure compensation value is equivalent to
decreasing the exposure value (EV) and will increase the amount of
light at the image sensor. The camera performs the exposure
compensation by adjusting absolute exposure time and/or aperture.
.. _v4l2-exposure-metering:
``V4L2_CID_EXPOSURE_METERING``
(enum)
enum v4l2_exposure_metering -
Determines how the camera measures the amount of light available for
the frame exposure. Possible values are:
.. tabularcolumns:: |p{8.7cm}|p{8.8cm}|
.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_EXPOSURE_METERING_AVERAGE``
- Use the light information coming from the entire frame and average
giving no weighting to any particular portion of the metered area.
* - ``V4L2_EXPOSURE_METERING_CENTER_WEIGHTED``
- Average the light information coming from the entire frame giving
priority to the center of the metered area.
* - ``V4L2_EXPOSURE_METERING_SPOT``
- Measure only very small area at the center of the frame.
* - ``V4L2_EXPOSURE_METERING_MATRIX``
- A multi-zone metering. The light intensity is measured in several
points of the frame and the results are combined. The algorithm of
the zones selection and their significance in calculating the
final value is device dependent.
``V4L2_CID_PAN_RELATIVE (integer)``
This control turns the camera horizontally by the specified amount.
The unit is undefined. A positive value moves the camera to the
right (clockwise when viewed from above), a negative value to the
left. A value of zero does not cause motion. This is a write-only
control.
``V4L2_CID_TILT_RELATIVE (integer)``
This control turns the camera vertically by the specified amount.
The unit is undefined. A positive value moves the camera up, a
negative value down. A value of zero does not cause motion. This is
a write-only control.
``V4L2_CID_PAN_RESET (button)``
When this control is set, the camera moves horizontally to the
default position.
``V4L2_CID_TILT_RESET (button)``
When this control is set, the camera moves vertically to the default
position.
``V4L2_CID_PAN_ABSOLUTE (integer)``
This control turns the camera horizontally to the specified
position. Positive values move the camera to the right (clockwise
when viewed from above), negative values to the left. Drivers should
interpret the values as arc seconds, with valid values between -180
* 3600 and +180 * 3600 inclusive.
``V4L2_CID_TILT_ABSOLUTE (integer)``
This control turns the camera vertically to the specified position.
Positive values move the camera up, negative values down. Drivers
should interpret the values as arc seconds, with valid values
between -180 * 3600 and +180 * 3600 inclusive.
``V4L2_CID_FOCUS_ABSOLUTE (integer)``
This control sets the focal point of the camera to the specified
position. The unit is undefined. Positive values set the focus
closer to the camera, negative values towards infinity.
``V4L2_CID_FOCUS_RELATIVE (integer)``
This control moves the focal point of the camera by the specified
amount. The unit is undefined. Positive values move the focus closer
to the camera, negative values towards infinity. This is a
write-only control.
``V4L2_CID_FOCUS_AUTO (boolean)``
Enables continuous automatic focus adjustments. The effect of manual
focus adjustments while this feature is enabled is undefined,
drivers should ignore such requests.
``V4L2_CID_AUTO_FOCUS_START (button)``
Starts single auto focus process. The effect of setting this control
when ``V4L2_CID_FOCUS_AUTO`` is set to ``TRUE`` (1) is undefined,
drivers should ignore such requests.
``V4L2_CID_AUTO_FOCUS_STOP (button)``
Aborts automatic focusing started with ``V4L2_CID_AUTO_FOCUS_START``
control. It is effective only when the continuous autofocus is
disabled, that is when ``V4L2_CID_FOCUS_AUTO`` control is set to
``FALSE`` (0).
.. _v4l2-auto-focus-status:
``V4L2_CID_AUTO_FOCUS_STATUS (bitmask)``
The automatic focus status. This is a read-only control.
Setting ``V4L2_LOCK_FOCUS`` lock bit of the ``V4L2_CID_3A_LOCK``
control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS``
control value.
.. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_AUTO_FOCUS_STATUS_IDLE``
- Automatic focus is not active.
* - ``V4L2_AUTO_FOCUS_STATUS_BUSY``
- Automatic focusing is in progress.
* - ``V4L2_AUTO_FOCUS_STATUS_REACHED``
- Focus has been reached.
* - ``V4L2_AUTO_FOCUS_STATUS_FAILED``
- Automatic focus has failed, the driver will not transition from
this state until another action is performed by an application.
.. _v4l2-auto-focus-range:
``V4L2_CID_AUTO_FOCUS_RANGE``
(enum)
enum v4l2_auto_focus_range -
Determines auto focus distance range for which lens may be adjusted.
.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_AUTO_FOCUS_RANGE_AUTO``
- The camera automatically selects the focus range.
* - ``V4L2_AUTO_FOCUS_RANGE_NORMAL``
- Normal distance range, limited for best automatic focus
performance.
* - ``V4L2_AUTO_FOCUS_RANGE_MACRO``
- Macro (close-up) auto focus. The camera will use its minimum
possible distance for auto focus.
* - ``V4L2_AUTO_FOCUS_RANGE_INFINITY``
- The lens is set to focus on an object at infinite distance.
``V4L2_CID_ZOOM_ABSOLUTE (integer)``
Specify the objective lens focal length as an absolute value. The
zoom unit is driver-specific and its value should be a positive
integer.
``V4L2_CID_ZOOM_RELATIVE (integer)``
Specify the objective lens focal length relatively to the current
value. Positive values move the zoom lens group towards the
telephoto direction, negative values towards the wide-angle
direction. The zoom unit is driver-specific. This is a write-only
control.
``V4L2_CID_ZOOM_CONTINUOUS (integer)``
Move the objective lens group at the specified speed until it
reaches physical device limits or until an explicit request to stop
the movement. A positive value moves the zoom lens group towards the
telephoto direction. A value of zero stops the zoom lens group
movement. A negative value moves the zoom lens group towards the
wide-angle direction. The zoom speed unit is driver-specific.
``V4L2_CID_IRIS_ABSOLUTE (integer)``
This control sets the camera's aperture to the specified value. The
unit is undefined. Larger values open the iris wider, smaller values
close it.
``V4L2_CID_IRIS_RELATIVE (integer)``
This control modifies the camera's aperture by the specified amount.
The unit is undefined. Positive values open the iris one step
further, negative values close it one step further. This is a
write-only control.
``V4L2_CID_PRIVACY (boolean)``
Prevent video from being acquired by the camera. When this control
is set to ``TRUE`` (1), no image can be captured by the camera.
Common means to enforce privacy are mechanical obturation of the
sensor and firmware image processing, but the device is not
restricted to these methods. Devices that implement the privacy
control must support read access and may support write access.
``V4L2_CID_BAND_STOP_FILTER (integer)``
Switch the band-stop filter of a camera sensor on or off, or specify
its strength. Such band-stop filters can be used, for example, to
filter out the fluorescent light component.
.. _v4l2-auto-n-preset-white-balance:
``V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE``
(enum)
enum v4l2_auto_n_preset_white_balance -
Sets white balance to automatic, manual or a preset. The presets
determine color temperature of the light as a hint to the camera for
white balance adjustments resulting in most accurate color
representation. The following white balance presets are listed in
order of increasing color temperature.
.. tabularcolumns:: |p{7.2 cm}|p{10.3cm}|
.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_WHITE_BALANCE_MANUAL``
- Manual white balance.
* - ``V4L2_WHITE_BALANCE_AUTO``
- Automatic white balance adjustments.
* - ``V4L2_WHITE_BALANCE_INCANDESCENT``
- White balance setting for incandescent (tungsten) lighting. It
generally cools down the colors and corresponds approximately to
2500...3500 K color temperature range.
* - ``V4L2_WHITE_BALANCE_FLUORESCENT``
- White balance preset for fluorescent lighting. It corresponds
approximately to 4000...5000 K color temperature.
* - ``V4L2_WHITE_BALANCE_FLUORESCENT_H``
- With this setting the camera will compensate for fluorescent H
lighting.
* - ``V4L2_WHITE_BALANCE_HORIZON``
- White balance setting for horizon daylight. It corresponds
approximately to 5000 K color temperature.
* - ``V4L2_WHITE_BALANCE_DAYLIGHT``
- White balance preset for daylight (with clear sky). It corresponds
approximately to 5000...6500 K color temperature.
* - ``V4L2_WHITE_BALANCE_FLASH``
- With this setting the camera will compensate for the flash light.
It slightly warms up the colors and corresponds roughly to
5000...5500 K color temperature.
* - ``V4L2_WHITE_BALANCE_CLOUDY``
- White balance preset for moderately overcast sky. This option
corresponds approximately to 6500...8000 K color temperature
range.
* - ``V4L2_WHITE_BALANCE_SHADE``
- White balance preset for shade or heavily overcast sky. It
corresponds approximately to 9000...10000 K color temperature.
.. _v4l2-wide-dynamic-range:
``V4L2_CID_WIDE_DYNAMIC_RANGE (boolean)``
Enables or disables the camera's wide dynamic range feature. This
feature allows to obtain clear images in situations where intensity
of the illumination varies significantly throughout the scene, i.e.
there are simultaneously very dark and very bright areas. It is most
commonly realized in cameras by combining two subsequent frames with
different exposure times. [#f1]_
.. _v4l2-image-stabilization:
``V4L2_CID_IMAGE_STABILIZATION (boolean)``
Enables or disables image stabilization.
``V4L2_CID_ISO_SENSITIVITY (integer menu)``
Determines ISO equivalent of an image sensor indicating the sensor's
sensitivity to light. The numbers are expressed in arithmetic scale,
as per :ref:`iso12232` standard, where doubling the sensor
sensitivity is represented by doubling the numerical ISO value.
Applications should interpret the values as standard ISO values
multiplied by 1000, e.g. control value 800 stands for ISO 0.8.
Drivers will usually support only a subset of standard ISO values.
The effect of setting this control while the
``V4L2_CID_ISO_SENSITIVITY_AUTO`` control is set to a value other
than ``V4L2_CID_ISO_SENSITIVITY_MANUAL`` is undefined, drivers
should ignore such requests.
.. _v4l2-iso-sensitivity-auto-type:
``V4L2_CID_ISO_SENSITIVITY_AUTO``
(enum)
enum v4l2_iso_sensitivity_type -
Enables or disables automatic ISO sensitivity adjustments.
.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_CID_ISO_SENSITIVITY_MANUAL``
- Manual ISO sensitivity.
* - ``V4L2_CID_ISO_SENSITIVITY_AUTO``
- Automatic ISO sensitivity adjustments.
.. _v4l2-scene-mode:
``V4L2_CID_SCENE_MODE``
(enum)
enum v4l2_scene_mode -
This control allows to select scene programs as the camera automatic
modes optimized for common shooting scenes. Within these modes the
camera determines best exposure, aperture, focusing, light metering,
white balance and equivalent sensitivity. The controls of those
parameters are influenced by the scene mode control. An exact
behavior in each mode is subject to the camera specification.
When the scene mode feature is not used, this control should be set
to ``V4L2_SCENE_MODE_NONE`` to make sure the other possibly related
controls are accessible. The following scene programs are defined:
.. raw:: latex
\small
.. tabularcolumns:: |p{5.9cm}|p{11.5cm}|
.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_SCENE_MODE_NONE``
- The scene mode feature is disabled.
* - ``V4L2_SCENE_MODE_BACKLIGHT``
- Backlight. Compensates for dark shadows when light is coming from
behind a subject, also by automatically turning on the flash.
* - ``V4L2_SCENE_MODE_BEACH_SNOW``
- Beach and snow. This mode compensates for all-white or bright
scenes, which tend to look gray and low contrast, when camera's
automatic exposure is based on an average scene brightness. To
compensate, this mode automatically slightly overexposes the
frames. The white balance may also be adjusted to compensate for
the fact that reflected snow looks bluish rather than white.
* - ``V4L2_SCENE_MODE_CANDLELIGHT``
- Candle light. The camera generally raises the ISO sensitivity and
lowers the shutter speed. This mode compensates for relatively
close subject in the scene. The flash is disabled in order to
preserve the ambiance of the light.
* - ``V4L2_SCENE_MODE_DAWN_DUSK``
- Dawn and dusk. Preserves the colors seen in low natural light
before dusk and after down. The camera may turn off the flash, and
automatically focus at infinity. It will usually boost saturation
and lower the shutter speed.
* - ``V4L2_SCENE_MODE_FALL_COLORS``
- Fall colors. Increases saturation and adjusts white balance for
color enhancement. Pictures of autumn leaves get saturated reds
and yellows.
* - ``V4L2_SCENE_MODE_FIREWORKS``
- Fireworks. Long exposure times are used to capture the expanding
burst of light from a firework. The camera may invoke image
stabilization.
* - ``V4L2_SCENE_MODE_LANDSCAPE``
- Landscape. The camera may choose a small aperture to provide deep
depth of field and long exposure duration to help capture detail
in dim light conditions. The focus is fixed at infinity. Suitable
for distant and wide scenery.
* - ``V4L2_SCENE_MODE_NIGHT``
- Night, also known as Night Landscape. Designed for low light
conditions, it preserves detail in the dark areas without blowing
out bright objects. The camera generally sets itself to a
medium-to-high ISO sensitivity, with a relatively long exposure
time, and turns flash off. As such, there will be increased image
noise and the possibility of blurred image.
* - ``V4L2_SCENE_MODE_PARTY_INDOOR``
- Party and indoor. Designed to capture indoor scenes that are lit
by indoor background lighting as well as the flash. The camera
usually increases ISO sensitivity, and adjusts exposure for the
low light conditions.
* - ``V4L2_SCENE_MODE_PORTRAIT``
- Portrait. The camera adjusts the aperture so that the depth of
field is reduced, which helps to isolate the subject against a
smooth background. Most cameras recognize the presence of faces in
the scene and focus on them. The color hue is adjusted to enhance
skin tones. The intensity of the flash is often reduced.
* - ``V4L2_SCENE_MODE_SPORTS``
- Sports. Significantly increases ISO and uses a fast shutter speed
to freeze motion of rapidly-moving subjects. Increased image noise
may be seen in this mode.
* - ``V4L2_SCENE_MODE_SUNSET``
- Sunset. Preserves deep hues seen in sunsets and sunrises. It bumps
up the saturation.
* - ``V4L2_SCENE_MODE_TEXT``
- Text. It applies extra contrast and sharpness, it is typically a
black-and-white mode optimized for readability. Automatic focus
may be switched to close-up mode and this setting may also involve
some lens-distortion correction.
.. raw:: latex
\normalsize
``V4L2_CID_3A_LOCK (bitmask)``
This control locks or unlocks the automatic focus, exposure and
white balance. The automatic adjustments can be paused independently
by setting the corresponding lock bit to 1. The camera then retains
the settings until the lock bit is cleared. The following lock bits
are defined:
When a given algorithm is not enabled, drivers should ignore
requests to lock it and should return no error. An example might be
an application setting bit ``V4L2_LOCK_WHITE_BALANCE`` when the
``V4L2_CID_AUTO_WHITE_BALANCE`` control is set to ``FALSE``. The
value of this control may be changed by exposure, white balance or
focus controls.
.. flat-table::
:header-rows: 0
:stub-columns: 0
* - ``V4L2_LOCK_EXPOSURE``
- Automatic exposure adjustments lock.
* - ``V4L2_LOCK_WHITE_BALANCE``
- Automatic white balance adjustments lock.
* - ``V4L2_LOCK_FOCUS``
- Automatic focus lock.
``V4L2_CID_PAN_SPEED (integer)``
This control turns the camera horizontally at the specific speed.
The unit is undefined. A positive value moves the camera to the
right (clockwise when viewed from above), a negative value to the
left. A value of zero stops the motion if one is in progress and has
no effect otherwise.
``V4L2_CID_TILT_SPEED (integer)``
This control turns the camera vertically at the specified speed. The
unit is undefined. A positive value moves the camera up, a negative
value down. A value of zero stops the motion if one is in progress
and has no effect otherwise.
.. [#f1]
This control may be changed to a menu control in the future, if more
options are required.