# SPDX-License-Identifier: GPL-2.0-only
#
# Intel network device configuration
#
config [31mCONFIG_NET_VENDOR_INTEL[0m
bool "Intel devices"
default y
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Intel cards. If you say Y, you will be asked for
your specific card in the following questions.
if [31mCONFIG_NET_VENDOR_INTEL[0m
config [31mCONFIG_E100[0m
tristate "Intel(R) PRO/100+ support"
depends on [31mCONFIG_PCI[0m
select [31mCONFIG_MII[0m
---help---
This driver supports Intel(R) PRO/100 family of adapters.
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
in the format 123456-001 (six digits hyphen three digits).
Use the above information and the Adapter & Driver ID Guide that
can be located at:
<http://support.intel.com>
to identify the adapter.
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/e100.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called e100.
config [31mCONFIG_E1000[0m
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
depends on [31mCONFIG_PCI[0m
---help---
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/e1000.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called e1000.
config [31mCONFIG_E1000E[0m
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
depends on [31mCONFIG_PCI[0m && (![31mCONFIG_SPARC32[0m || [31mCONFIG_BROKEN[0m)
select [31mCONFIG_CRC32[0m
imply [31mCONFIG_PTP_1588_CLOCK[0m
---help---
This driver supports the [31mCONFIG_PCI[0m-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For [31mCONFIG_PCI[0m or [31mCONFIG_PCI[0m-X e1000 adapters,
use the regular e1000 driver For more information on how to
identify your adapter, go to the Adapter & Driver ID Guide that
can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/e1000e.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called e1000e.
config [31mCONFIG_E1000E_HWTS[0m
bool "Support HW cross-timestamp on PCH devices"
default y
depends on [31mCONFIG_E1000E[0m && [31mCONFIG_X86[0m
---help---
Say Y to enable hardware supported cross-timestamping on PCH
devices. The cross-timestamp is available through the PTP clock
driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
config [31mCONFIG_IGB[0m
tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
depends on [31mCONFIG_PCI[0m
imply [31mCONFIG_PTP_1588_CLOCK[0m
select [31mCONFIG_I2C[0m
select [31mCONFIG_I2C_ALGOBIT[0m
---help---
This driver supports Intel(R) 82575/82576 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/igb.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called igb.
config [31mCONFIG_IGB_HWMON[0m
bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
default y
depends on [31mCONFIG_IGB[0m && [31mCONFIG_HWMON[0m && !([31mCONFIG_IGB[0m=y && [31mCONFIG_HWMON[0m=m)
---help---
Say Y if you want to expose thermal sensor data on Intel devices.
Some of our devices contain thermal sensors, both external and internal.
This data is available via the hwmon sysfs interface and exposes
the onboard sensors.
config [31mCONFIG_IGB_DCA[0m
bool "Direct Cache Access (DCA) Support"
default y
depends on [31mCONFIG_IGB[0m && [31mCONFIG_DCA[0m && !([31mCONFIG_IGB[0m=y && [31mCONFIG_DCA[0m=m)
---help---
Say Y here if you want to use Direct Cache Access ([31mCONFIG_DCA[0m) in the
driver. [31mCONFIG_DCA[0m is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
config [31mCONFIG_IGBVF[0m
tristate "Intel(R) 82576 Virtual Function Ethernet support"
depends on [31mCONFIG_PCI[0m
---help---
This driver supports Intel(R) 82576 virtual functions. For more
information on how to identify your adapter, go to the Adapter &
Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/igbvf.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called igbvf.
config [31mCONFIG_IXGB[0m
tristate "Intel(R) PRO/10GbE support"
depends on [31mCONFIG_PCI[0m
---help---
This driver supports Intel(R) PRO/10GbE family of adapters for
[31mCONFIG_PCI[0m-X type cards. For [31mCONFIG_PCI[0m-[31mCONFIG_E[0m type cards, use the "ixgbe" driver
instead. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/ixgb.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called ixgb.
config [31mCONFIG_IXGBE[0m
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on [31mCONFIG_PCI[0m
select [31mCONFIG_MDIO[0m
select [31mCONFIG_PHYLIB[0m
imply [31mCONFIG_PTP_1588_CLOCK[0m
---help---
This driver supports Intel(R) 10GbE [31mCONFIG_PCI[0m Express family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/ixgbe.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called ixgbe.
config [31mCONFIG_IXGBE_HWMON[0m
bool "Intel(R) 10GbE PCI Express adapters HWMON support"
default y
depends on [31mCONFIG_IXGBE[0m && [31mCONFIG_HWMON[0m && !([31mCONFIG_IXGBE[0m=y && [31mCONFIG_HWMON[0m=m)
---help---
Say Y if you want to expose the thermal sensor data on some of
our cards, via a hwmon sysfs interface.
config [31mCONFIG_IXGBE_DCA[0m
bool "Direct Cache Access (DCA) Support"
default y
depends on [31mCONFIG_IXGBE[0m && [31mCONFIG_DCA[0m && !([31mCONFIG_IXGBE[0m=y && [31mCONFIG_DCA[0m=m)
---help---
Say Y here if you want to use Direct Cache Access ([31mCONFIG_DCA[0m) in the
driver. [31mCONFIG_DCA[0m is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
config [31mCONFIG_IXGBE_DCB[0m
bool "Data Center Bridging (DCB) Support"
default n
depends on [31mCONFIG_IXGBE[0m && [31mCONFIG_DCB[0m
---help---
Say Y here if you want to use Data Center Bridging ([31mCONFIG_DCB[0m) in the
driver.
If unsure, say N.
config [31mCONFIG_IXGBE_IPSEC[0m
bool "IPSec XFRM cryptography-offload acceleration"
depends on [31mCONFIG_IXGBE[0m
depends on [31mCONFIG_XFRM_OFFLOAD[0m
default y
select [31mCONFIG_XFRM_ALGO[0m
---help---
Enable support for IPSec offload in ixgbe.ko
config [31mCONFIG_IXGBEVF[0m
tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
depends on [31mCONFIG_PCI_MSI[0m
---help---
This driver supports Intel(R) [31mCONFIG_PCI[0m Express virtual functions for the
Intel(R) ixgbe driver. For more information on how to identify your
adapter, go to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/ixgbevf.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called ixgbevf. MSI-X interrupt support is required
for this driver to work correctly.
config [31mCONFIG_IXGBEVF_IPSEC[0m
bool "IPSec XFRM cryptography-offload acceleration"
depends on [31mCONFIG_IXGBEVF[0m
depends on [31mCONFIG_XFRM_OFFLOAD[0m
default y
select [31mCONFIG_XFRM_ALGO[0m
---help---
Enable support for IPSec offload in ixgbevf.ko
config [31mCONFIG_I40E[0m
tristate "Intel(R) Ethernet Controller XL710 Family support"
imply [31mCONFIG_PTP_1588_CLOCK[0m
depends on [31mCONFIG_PCI[0m
---help---
This driver supports Intel(R) Ethernet Controller XL710 Family of
devices. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/i40e.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called i40e.
config [31mCONFIG_I40E_DCB[0m
bool "Data Center Bridging (DCB) Support"
default n
depends on [31mCONFIG_I40E[0m && [31mCONFIG_DCB[0m
---help---
Say Y here if you want to use Data Center Bridging ([31mCONFIG_DCB[0m) in the
driver.
If unsure, say N.
# this is here to allow seamless migration from [31mCONFIG_I40EVF[0m --> [31mCONFIG_IAVF[0m name
# so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF
config [31mCONFIG_IAVF[0m
tristate
config [31mCONFIG_I40EVF[0m
tristate "Intel(R) Ethernet Adaptive Virtual Function support"
select [31mCONFIG_IAVF[0m
depends on [31mCONFIG_PCI_MSI[0m
---help---
This driver supports virtual functions for Intel XL710,
X710, X722, XXV710, and all devices advertising support for
Intel Ethernet Adaptive Virtual Function devices. For more
information on how to identify your adapter, go to the Adapter
& Driver ID Guide that can be located at:
<https://support.intel.com>
This driver was formerly named i40evf.
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/iavf.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called iavf. MSI-X interrupt support is required
for this driver to work correctly.
config [31mCONFIG_ICE[0m
tristate "Intel(R) Ethernet Connection E800 Series Support"
default n
depends on [31mCONFIG_PCI_MSI[0m
---help---
This driver supports Intel(R) Ethernet Connection E800 Series of
devices. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/ice.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called ice.
config [31mCONFIG_FM10K[0m
tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
default n
depends on [31mCONFIG_PCI_MSI[0m
imply [31mCONFIG_PTP_1588_CLOCK[0m
---help---
This driver supports Intel(R) FM10000 Ethernet Switch Host
Interface. For more information on how to identify your adapter,
go to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/device_drivers/intel/fm10k.rst>.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called fm10k. MSI-X interrupt support is required
config [31mCONFIG_IGC[0m
tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
default n
depends on [31mCONFIG_PCI[0m
---help---
This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
family of adapters.
For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
<http://support.intel.com>
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called igc.
endif # [31mCONFIG_NET_VENDOR_INTEL[0m