Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

# SPDX-License-Identifier: GPL-2.0-only
config CONFIG_SND_SOC_TEGRA
	tristate "SoC Audio for the Tegra System-on-Chip"
	depends on (CONFIG_ARCH_TEGRA && CONFIG_TEGRA20_APB_DMA) || CONFIG_COMPILE_TEST
	depends on CONFIG_COMMON_CLK
	depends on CONFIG_RESET_CONTROLLER
	select CONFIG_REGMAP_MMIO
	select CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM
	help
	  Say Y or CONFIG_M here if you want support for SoC audio on Tegra.

config CONFIG_SND_SOC_TEGRA20_AC97
	tristate "Tegra20 AC97 interface"
	depends on CONFIG_SND_SOC_TEGRA
	select CONFIG_SND_SOC_AC97_BUS
	select CONFIG_SND_SOC_TEGRA20_DAS
	help
	  Say Y or CONFIG_M if you want to add support for codecs attached to the
	  Tegra20 AC97 interface. You will also need to select the individual
	  machine drivers to support below.

config CONFIG_SND_SOC_TEGRA20_DAS
	tristate "Tegra20 DAS module"
	depends on CONFIG_SND_SOC_TEGRA
	help
	  Say Y or CONFIG_M if you want to add support for the Tegra20 DAS module.
	  You will also need to select the individual machine drivers to
	  support below.

config CONFIG_SND_SOC_TEGRA20_I2S
	tristate "Tegra20 I2S interface"
	depends on CONFIG_SND_SOC_TEGRA
	select CONFIG_SND_SOC_TEGRA20_DAS
	help
	  Say Y or CONFIG_M if you want to add support for codecs attached to the
	  Tegra20 I2S interface. You will also need to select the individual
	  machine drivers to support below.

config CONFIG_SND_SOC_TEGRA20_SPDIF
	tristate "Tegra20 SPDIF interface"
	depends on CONFIG_SND_SOC_TEGRA
	default m
	help
	  Say Y or CONFIG_M if you want to add support for the Tegra20 SPDIF interface.
	  You will also need to select the individual machine drivers to support
	  below.

config CONFIG_SND_SOC_TEGRA30_AHUB
	tristate "Tegra30 AHUB module"
	depends on CONFIG_SND_SOC_TEGRA
	help
	  Say Y or CONFIG_M if you want to add support for the Tegra30 AHUB module.
	  You will also need to select the individual machine drivers to
	  support below.

config CONFIG_SND_SOC_TEGRA30_I2S
	tristate "Tegra30 I2S interface"
	depends on CONFIG_SND_SOC_TEGRA
	select CONFIG_SND_SOC_TEGRA30_AHUB
	help
	  Say Y or CONFIG_M if you want to add support for codecs attached to the
	  Tegra30 I2S interface. You will also need to select the individual
	  machine drivers to support below.

config CONFIG_SND_SOC_TEGRA_RT5640
	tristate "SoC Audio support for Tegra boards using an RT5640 codec"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_I2C && CONFIG_GPIOLIB
	select CONFIG_SND_SOC_RT5640
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on Tegra
	  boards using the RT5640 codec, such as Dalmore.

config CONFIG_SND_SOC_TEGRA_WM8753
	tristate "SoC Audio support for Tegra boards using a WM8753 codec"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_I2C && CONFIG_GPIOLIB
	select CONFIG_SND_SOC_WM8753
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on Tegra
	  boards using the WM8753 codec, such as Whistler.

config CONFIG_SND_SOC_TEGRA_WM8903
	tristate "SoC Audio support for Tegra boards using a WM8903 codec"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_I2C && CONFIG_GPIOLIB
	select CONFIG_SND_SOC_WM8903
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on Tegra
	  boards using the WM8093 codec. Currently, the supported boards are
	  Harmony, Ventana, Seaboard, Kaen, and Aebl.

config CONFIG_SND_SOC_TEGRA_WM9712
	tristate "SoC Audio support for Tegra boards using a WM9712 codec"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_GPIOLIB
	select CONFIG_SND_SOC_TEGRA20_AC97
	select CONFIG_SND_SOC_WM9712
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on Tegra
	  boards using the WM9712 (or compatible) codec.

config CONFIG_SND_SOC_TEGRA_TRIMSLICE
	tristate "SoC Audio support for TrimSlice board"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_I2C
	select CONFIG_SND_SOC_TLV320AIC23_I2C
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on the
	  TrimSlice platform.

config CONFIG_SND_SOC_TEGRA_ALC5632
	tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_I2C && CONFIG_GPIOLIB
	select CONFIG_SND_SOC_ALC5632
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on the
	  Toshiba AC100 netbook.

config CONFIG_SND_SOC_TEGRA_MAX98090
	tristate "SoC Audio support for Tegra boards using a MAX98090 codec"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_I2C && CONFIG_GPIOLIB
	select CONFIG_SND_SOC_MAX98090
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on Tegra
	  boards using the MAX98090 codec, such as Venice2.

config CONFIG_SND_SOC_TEGRA_RT5677
	tristate "SoC Audio support for Tegra boards using a RT5677 codec"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_I2C && CONFIG_GPIOLIB
	select CONFIG_SND_SOC_RT5677
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on Tegra
	  boards using the RT5677 codec, such as Ryu.

config CONFIG_SND_SOC_TEGRA_SGTL5000
	tristate "SoC Audio support for Tegra boards using a SGTL5000 codec"
	depends on CONFIG_SND_SOC_TEGRA && CONFIG_I2C && CONFIG_GPIOLIB
	select CONFIG_SND_SOC_SGTL5000
	help
	  Say Y or CONFIG_M here if you want to add support for SoC audio on Tegra
	  boards using the SGTL5000 codec, such as Apalis T30, Apalis TK1 or
	  Colibri T30.