* Clock bindings for Freescale i.MX35
Required properties:
- compatible: Should be "fsl,imx35-ccm"
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX35
clocks and IDs.
Clock ID
---------------------------
ckih 0
mpll 1
ppll 2
mpll_075 3
arm 4
hsp 5
hsp_div 6
hsp_sel 7
ahb 8
ipg 9
arm_per_div 10
ahb_per_div 11
ipg_per 12
uart_sel 13
uart_div 14
esdhc_sel 15
esdhc1_div 16
esdhc2_div 17
esdhc3_div 18
spdif_sel 19
spdif_div_pre 20
spdif_div_post 21
ssi_sel 22
ssi1_div_pre 23
ssi1_div_post 24
ssi2_div_pre 25
ssi2_div_post 26
usb_sel 27
usb_div 28
nfc_div 29
asrc_gate 30
pata_gate 31
audmux_gate 32
can1_gate 33
can2_gate 34
cspi1_gate 35
cspi2_gate 36
ect_gate 37
edio_gate 38
emi_gate 39
epit1_gate 40
epit2_gate 41
esai_gate 42
esdhc1_gate 43
esdhc2_gate 44
esdhc3_gate 45
fec_gate 46
gpio1_gate 47
gpio2_gate 48
gpio3_gate 49
gpt_gate 50
i2c1_gate 51
i2c2_gate 52
i2c3_gate 53
iomuxc_gate 54
ipu_gate 55
kpp_gate 56
mlb_gate 57
mshc_gate 58
owire_gate 59
pwm_gate 60
rngc_gate 61
rtc_gate 62
rtic_gate 63
scc_gate 64
sdma_gate 65
spba_gate 66
spdif_gate 67
ssi1_gate 68
ssi2_gate 69
uart1_gate 70
uart2_gate 71
uart3_gate 72
usbotg_gate 73
wdog_gate 74
max_gate 75
admux_gate 76
csi_gate 77
csi_div 78
csi_sel 79
iim_gate 80
gpu2d_gate 81
ckli_gate 82
Examples:
clks: ccm@53f80000 {
compatible = "fsl,imx35-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <31>;
#clock-cells = <1>;
};
esdhc1: esdhc@53fb4000 {
compatible = "fsl,imx35-esdhc";
reg = <0x53fb4000 0x4000>;
interrupts = <7>;
clocks = <&clks 9>, <&clks 8>, <&clks 43>;
clock-names = "ipg", "ahb", "per";
};