Kernel driver nct7904 ===================== Supported chip: * Nuvoton NCT7904D Prefix: nct7904 Addresses: I2C 0x2d, 0x2e Datasheet: Publicly available at Nuvoton website http://www.nuvoton.com/ Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> Description ----------- The NCT7904D is a hardware monitor supporting up to 20 voltage sensors, internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature interface, up to 12 fan tachometer inputs, up to 4 fan control channels with SmartFan. Sysfs entries ------------- Currently, the driver supports only the following features: ======================= ======================================================= in[1-20]_input Input voltage measurements (mV) fan[1-12]_input Fan tachometer measurements (rpm) temp1_input Local temperature (1/1000 degree, 0.125 degree resolution) temp[2-9]_input CPU temperatures (1/1000 degree, 0.125 degree resolution) pwm[1-4]_enable R/W, 1/2 for manual or SmartFan mode Setting SmartFan mode is supported only if it has been previously configured by BIOS (or configuration EEPROM) pwm[1-4] R/O in SmartFan mode, R/W in manual control mode ======================= ======================================================= The driver checks sensor control registers and does not export the sensors that are not enabled. Anyway, a sensor that is enabled may actually be not connected and thus provide zero readings. Limitations ----------- The following features are not supported in current version: - SmartFan control - Watchdog - GPIO - external temperature sensors - SMI - min/max values - many other... |