.. Permission is granted to copy, distribute and/or modify this
.. document under the terms of the GNU Free Documentation License,
.. Version 1.1 or any later version published by the Free Software
.. Foundation, with no Invariant Sections, no Front-Cover Texts
.. and no Back-Cover Texts. A copy of the license is included at
.. Documentation/media/uapi/fdl-appendix.rst.
..
.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
******************************
Single-planar format structure
******************************
.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{11.0cm}|
.. c:type:: v4l2_pix_format
.. cssclass:: longtable
.. flat-table:: struct v4l2_pix_format
:header-rows: 0
:stub-columns: 0
:widths: 1 1 2
* - __u32
- ``width``
- Image width in pixels.
* - __u32
- ``height``
- Image height in pixels. If ``field`` is one of ``V4L2_FIELD_TOP``,
``V4L2_FIELD_BOTTOM`` or ``V4L2_FIELD_ALTERNATE`` then height
refers to the number of lines in the field, otherwise it refers to
the number of lines in the frame (which is twice the field height
for interlaced formats).
* - :cspan:`2` Applications set these fields to request an image
size, drivers return the closest possible values. In case of
planar formats the ``width`` and ``height`` applies to the largest
plane. To avoid ambiguities drivers must return values rounded up
to a multiple of the scale factor of any smaller planes. For
example when the image format is YUV 4:2:0, ``width`` and
``height`` must be multiples of two.
For compressed formats that contain the resolution information encoded
inside the stream, when fed to a stateful mem2mem decoder, the fields
may be zero to rely on the decoder to detect the right values. For more
details see :ref:`decoder` and format descriptions.
* - __u32
- ``pixelformat``
- The pixel format or type of compression, set by the application.
This is a little endian
:ref:`four character code <v4l2-fourcc>`. V4L2 defines standard
RGB formats in :ref:`pixfmt-rgb`, YUV formats in
:ref:`yuv-formats`, and reserved codes in
:ref:`reserved-formats`
* - __u32
- ``field``
- Field order, from enum :c:type:`v4l2_field`.
Video images are typically interlaced. Applications can request to
capture or output only the top or bottom field, or both fields
interlaced or sequentially stored in one buffer or alternating in
separate buffers. Drivers return the actual field order selected.
For more details on fields see :ref:`field-order`.
* - __u32
- ``bytesperline``
- Distance in bytes between the leftmost pixels in two adjacent
lines.
* - :cspan:`2`
Both applications and drivers can set this field to request
padding bytes at the end of each line. Drivers however may ignore
the value requested by the application, returning ``width`` times
bytes per pixel or a larger value required by the hardware. That
implies applications can just set this field to zero to get a
reasonable default.
Video hardware may access padding bytes, therefore they must
reside in accessible memory. Consider cases where padding bytes
after the last line of an image cross a system page boundary.
Input devices may write padding bytes, the value is undefined.
Output devices ignore the contents of padding bytes.
When the image format is planar the ``bytesperline`` value applies
to the first plane and is divided by the same factor as the
``width`` field for the other planes. For example the Cb and Cr
planes of a YUV 4:2:0 image have half as many padding bytes
following each line as the Y plane. To avoid ambiguities drivers
must return a ``bytesperline`` value rounded up to a multiple of
the scale factor.
For compressed formats the ``bytesperline`` value makes no sense.
Applications and drivers must set this to 0 in that case.
* - __u32
- ``sizeimage``
- Size in bytes of the buffer to hold a complete image, set by the
driver. Usually this is ``bytesperline`` times ``height``. When
the image consists of variable length compressed data this is the
number of bytes required by the codec to support the worst-case
compression scenario.
The driver will set the value for uncompressed images.
Clients are allowed to set the sizeimage field for variable length
compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
value itself, or it may modify the provided value based on
alignment requirements or minimum/maximum size requirements.
If the client wants to leave this to the driver, then it should
set sizeimage to 0.
* - __u32
- ``colorspace``
- Image colorspace, from enum :c:type:`v4l2_colorspace`.
This information supplements the ``pixelformat`` and must be set
by the driver for capture streams and by the application for
output streams, see :ref:`colorspaces`.
* - __u32
- ``priv``
- This field indicates whether the remaining fields of the
struct :c:type:`v4l2_pix_format`, also called the
extended fields, are valid. When set to
``V4L2_PIX_FMT_PRIV_MAGIC``, it indicates that the extended fields
have been correctly initialized. When set to any other value it
indicates that the extended fields contain undefined values.
Applications that wish to use the pixel format extended fields
must first ensure that the feature is supported by querying the
device for the :ref:`V4L2_CAP_EXT_PIX_FORMAT <querycap>`
capability. If the capability isn't set the pixel format extended
fields are not supported and using the extended fields will lead
to undefined results.
To use the extended fields, applications must set the ``priv``
field to ``V4L2_PIX_FMT_PRIV_MAGIC``, initialize all the extended
fields and zero the unused bytes of the
struct :c:type:`v4l2_format` ``raw_data`` field.
When the ``priv`` field isn't set to ``V4L2_PIX_FMT_PRIV_MAGIC``
drivers must act as if all the extended fields were set to zero.
On return drivers must set the ``priv`` field to
``V4L2_PIX_FMT_PRIV_MAGIC`` and all the extended fields to
applicable values.
* - __u32
- ``flags``
- Flags set by the application or driver, see :ref:`format-flags`.
* - union {
- (anonymous)
-
* - __u32
- ``ycbcr_enc``
- Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`.
This information supplements the ``colorspace`` and must be set by
the driver for capture streams and by the application for output
streams, see :ref:`colorspaces`.
* - __u32
- ``hsv_enc``
- HSV encoding, from enum :c:type:`v4l2_hsv_encoding`.
This information supplements the ``colorspace`` and must be set by
the driver for capture streams and by the application for output
streams, see :ref:`colorspaces`.
* - }
-
-
* - __u32
- ``quantization``
- Quantization range, from enum :c:type:`v4l2_quantization`.
This information supplements the ``colorspace`` and must be set by
the driver for capture streams and by the application for output
streams, see :ref:`colorspaces`.
* - __u32
- ``xfer_func``
- Transfer function, from enum :c:type:`v4l2_xfer_func`.
This information supplements the ``colorspace`` and must be set by
the driver for capture streams and by the application for output
streams, see :ref:`colorspaces`.