Training courses
Kernel and Embedded Linux
Bootlin training courses
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
/* SPDX-License-Identifier: GPL-2.0 */ /* * arch/arm/mach-sa1100/include/mach/simpad.h * * based of assabet.h same as HUW_Webpanel * * This file contains the hardware specific definitions for SIMpad * * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch> */ #ifndef __ASM_ARCH_SIMPAD_H #define __ASM_ARCH_SIMPAD_H #define GPIO_UART1_RTS GPIO_GPIO14 #define GPIO_UART1_DTR GPIO_GPIO7 #define GPIO_UART1_CTS GPIO_GPIO8 #define GPIO_UART1_DCD GPIO_GPIO23 #define GPIO_UART1_DSR GPIO_GPIO6 #define GPIO_UART3_RTS GPIO_GPIO12 #define GPIO_UART3_DTR GPIO_GPIO16 #define GPIO_UART3_CTS GPIO_GPIO13 #define GPIO_UART3_DCD GPIO_GPIO18 #define GPIO_UART3_DSR GPIO_GPIO17 #define GPIO_POWER_BUTTON GPIO_GPIO0 #define GPIO_UCB1300_IRQ GPIO_GPIO22 /* UCB GPIO and touchscreen */ #define IRQ_UART1_CTS IRQ_GPIO15 #define IRQ_UART1_DCD GPIO_GPIO23 #define IRQ_UART1_DSR GPIO_GPIO6 #define IRQ_UART3_CTS GPIO_GPIO13 #define IRQ_UART3_DCD GPIO_GPIO18 #define IRQ_UART3_DSR GPIO_GPIO17 #define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22 #define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0 /*--- PCMCIA ---*/ #define GPIO_CF_CD 24 #define GPIO_CF_IRQ 1 /*--- SmartCard ---*/ #define GPIO_SMART_CARD GPIO_GPIO10 #define IRQ_GPIO_SMARD_CARD IRQ_GPIO10 /*--- ucb1x00 GPIO ---*/ #define SIMPAD_UCB1X00_GPIO_BASE (GPIO_MAX + 1) #define SIMPAD_UCB1X00_GPIO_PROG1 (SIMPAD_UCB1X00_GPIO_BASE) #define SIMPAD_UCB1X00_GPIO_PROG2 (SIMPAD_UCB1X00_GPIO_BASE + 1) #define SIMPAD_UCB1X00_GPIO_UP (SIMPAD_UCB1X00_GPIO_BASE + 2) #define SIMPAD_UCB1X00_GPIO_DOWN (SIMPAD_UCB1X00_GPIO_BASE + 3) #define SIMPAD_UCB1X00_GPIO_LEFT (SIMPAD_UCB1X00_GPIO_BASE + 4) #define SIMPAD_UCB1X00_GPIO_RIGHT (SIMPAD_UCB1X00_GPIO_BASE + 5) #define SIMPAD_UCB1X00_GPIO_6 (SIMPAD_UCB1X00_GPIO_BASE + 6) #define SIMPAD_UCB1X00_GPIO_7 (SIMPAD_UCB1X00_GPIO_BASE + 7) #define SIMPAD_UCB1X00_GPIO_HEADSET (SIMPAD_UCB1X00_GPIO_BASE + 8) #define SIMPAD_UCB1X00_GPIO_SPEAKER (SIMPAD_UCB1X00_GPIO_BASE + 9) /*--- CS3 Latch ---*/ #define SIMPAD_CS3_GPIO_BASE (GPIO_MAX + 11) #define SIMPAD_CS3_VCC_5V_EN (SIMPAD_CS3_GPIO_BASE) #define SIMPAD_CS3_VCC_3V_EN (SIMPAD_CS3_GPIO_BASE + 1) #define SIMPAD_CS3_EN1 (SIMPAD_CS3_GPIO_BASE + 2) #define SIMPAD_CS3_EN0 (SIMPAD_CS3_GPIO_BASE + 3) #define SIMPAD_CS3_DISPLAY_ON (SIMPAD_CS3_GPIO_BASE + 4) #define SIMPAD_CS3_PCMCIA_BUFF_DIS (SIMPAD_CS3_GPIO_BASE + 5) #define SIMPAD_CS3_MQ_RESET (SIMPAD_CS3_GPIO_BASE + 6) #define SIMPAD_CS3_PCMCIA_RESET (SIMPAD_CS3_GPIO_BASE + 7) #define SIMPAD_CS3_DECT_POWER_ON (SIMPAD_CS3_GPIO_BASE + 8) #define SIMPAD_CS3_IRDA_SD (SIMPAD_CS3_GPIO_BASE + 9) #define SIMPAD_CS3_RS232_ON (SIMPAD_CS3_GPIO_BASE + 10) #define SIMPAD_CS3_SD_MEDIAQ (SIMPAD_CS3_GPIO_BASE + 11) #define SIMPAD_CS3_LED2_ON (SIMPAD_CS3_GPIO_BASE + 12) #define SIMPAD_CS3_IRDA_MODE (SIMPAD_CS3_GPIO_BASE + 13) #define SIMPAD_CS3_ENABLE_5V (SIMPAD_CS3_GPIO_BASE + 14) #define SIMPAD_CS3_RESET_SIMCARD (SIMPAD_CS3_GPIO_BASE + 15) #define SIMPAD_CS3_PCMCIA_BVD1 (SIMPAD_CS3_GPIO_BASE + 16) #define SIMPAD_CS3_PCMCIA_BVD2 (SIMPAD_CS3_GPIO_BASE + 17) #define SIMPAD_CS3_PCMCIA_VS1 (SIMPAD_CS3_GPIO_BASE + 18) #define SIMPAD_CS3_PCMCIA_VS2 (SIMPAD_CS3_GPIO_BASE + 19) #define SIMPAD_CS3_LOCK_IND (SIMPAD_CS3_GPIO_BASE + 20) #define SIMPAD_CS3_CHARGING_STATE (SIMPAD_CS3_GPIO_BASE + 21) #define SIMPAD_CS3_PCMCIA_SHORT (SIMPAD_CS3_GPIO_BASE + 22) #define SIMPAD_CS3_GPIO_23 (SIMPAD_CS3_GPIO_BASE + 23) #define CS3_BASE IOMEM(0xf1000000) long simpad_get_cs3_ro(void); long simpad_get_cs3_shadow(void); void simpad_set_cs3_bit(int value); void simpad_clear_cs3_bit(int value); #define VCC_5V_EN 0x0001 /* For 5V PCMCIA */ #define VCC_3V_EN 0x0002 /* FOR 3.3V PCMCIA */ #define EN1 0x0004 /* This is only for EPROM's */ #define EN0 0x0008 /* Both should be enable for 3.3V or 5V */ #define DISPLAY_ON 0x0010 #define PCMCIA_BUFF_DIS 0x0020 #define MQ_RESET 0x0040 #define PCMCIA_RESET 0x0080 #define DECT_POWER_ON 0x0100 #define IRDA_SD 0x0200 /* Shutdown for powersave */ #define RS232_ON 0x0400 #define SD_MEDIAQ 0x0800 /* Shutdown for powersave */ #define LED2_ON 0x1000 #define IRDA_MODE 0x2000 /* Fast/Slow IrDA mode */ #define ENABLE_5V 0x4000 /* Enable 5V circuit */ #define RESET_SIMCARD 0x8000 #define PCMCIA_BVD1 0x01 #define PCMCIA_BVD2 0x02 #define PCMCIA_VS1 0x04 #define PCMCIA_VS2 0x08 #define LOCK_IND 0x10 #define CHARGING_STATE 0x20 #define PCMCIA_SHORT 0x40 /*--- Battery ---*/ struct simpad_battery { unsigned char ac_status; /* line connected yes/no */ unsigned char status; /* battery loading yes/no */ unsigned char percentage; /* percentage loaded */ unsigned short life; /* life till empty */ }; /* These should match the apm_bios.h definitions */ #define SIMPAD_AC_STATUS_AC_OFFLINE 0x00 #define SIMPAD_AC_STATUS_AC_ONLINE 0x01 #define SIMPAD_AC_STATUS_AC_BACKUP 0x02 /* What does this mean? */ #define SIMPAD_AC_STATUS_AC_UNKNOWN 0xff /* These bitfields are rarely "or'd" together */ #define SIMPAD_BATT_STATUS_HIGH 0x01 #define SIMPAD_BATT_STATUS_LOW 0x02 #define SIMPAD_BATT_STATUS_CRITICAL 0x04 #define SIMPAD_BATT_STATUS_CHARGING 0x08 #define SIMPAD_BATT_STATUS_CHARGE_MAIN 0x10 #define SIMPAD_BATT_STATUS_DEAD 0x20 /* Battery will not charge */ #define SIMPAD_BATT_NOT_INSTALLED 0x20 /* For expansion pack batteries */ #define SIMPAD_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */ #define SIMPAD_BATT_STATUS_NOBATT 0x80 #define SIMPAD_BATT_STATUS_UNKNOWN 0xff extern int simpad_get_battery(struct simpad_battery* ); #endif // __ASM_ARCH_SIMPAD_H