Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * pi1.h: Definitions for SGI PI1 parallel port
 */

#ifndef _SGI_PI1_H
#define _SGI_PI1_H

struct pi1_regs {
	u8 _data[3];
	volatile u8 data;
	u8 _ctrl[3];
	volatile u8 ctrl;
#define PI1_CTRL_STROBE_N	0x01
#define PI1_CTRL_AFD_N		0x02
#define PI1_CTRL_INIT_N		0x04
#define PI1_CTRL_SLIN_N		0x08
#define PI1_CTRL_IRQ_ENA	0x10
#define PI1_CTRL_DIR		0x20
#define PI1_CTRL_SEL		0x40
	u8 _status[3];
	volatile u8 status;
#define PI1_STAT_DEVID		0x03	/* bits 0-1 */
#define PI1_STAT_NOINK		0x04	/* SGI MODE only */
#define PI1_STAT_ERROR		0x08
#define PI1_STAT_ONLINE		0x10
#define PI1_STAT_PE		0x20
#define PI1_STAT_ACK		0x40
#define PI1_STAT_BUSY		0x80
	u8 _dmactrl[3];
	volatile u8 dmactrl;
#define PI1_DMACTRL_FIFO_EMPTY	0x01	/* fifo empty R/O */
#define PI1_DMACTRL_ABORT	0x02	/* reset DMA and internal fifo W/O */
#define PI1_DMACTRL_STDMODE	0x00	/* bits 2-3 */
#define PI1_DMACTRL_SGIMODE	0x04	/* bits 2-3 */
#define PI1_DMACTRL_RICOHMODE	0x08	/* bits 2-3 */
#define PI1_DMACTRL_HPMODE	0x0c	/* bits 2-3 */
#define PI1_DMACTRL_BLKMODE	0x10	/* block mode */
#define PI1_DMACTRL_FIFO_CLEAR	0x20	/* clear fifo W/O */
#define PI1_DMACTRL_READ	0x40	/* read */
#define PI1_DMACTRL_RUN		0x80	/* pedal to the metal */
	u8 _intstat[3];
	volatile u8 intstat;
#define PI1_INTSTAT_ACK		0x04
#define PI1_INTSTAT_FEMPTY	0x08
#define PI1_INTSTAT_NOINK	0x10
#define PI1_INTSTAT_ONLINE	0x20
#define PI1_INTSTAT_ERR		0x40
#define PI1_INTSTAT_PE		0x80
	u8 _intmask[3];
	volatile u8 intmask;		/* enabled low, reset high*/
#define PI1_INTMASK_ACK		0x04
#define PI1_INTMASK_FIFO_EMPTY	0x08
#define PI1_INTMASK_NOINK	0x10
#define PI1_INTMASK_ONLINE	0x20
#define PI1_INTMASK_ERR		0x40
#define PI1_INTMASK_PE		0x80
	u8 _timer1[3];
	volatile u8 timer1;
#define PI1_TIME1		0x27
	u8 _timer2[3];
	volatile u8 timer2;
#define PI1_TIME2		0x13
	u8 _timer3[3];
	volatile u8 timer3;
#define PI1_TIME3		0x10
	u8 _timer4[3];
	volatile u8 timer4;
#define PI1_TIME4		0x00
};

#endif